Hooker Furniture Ramsey Hall Console 638-85002 User manual

ASSEMBLY INSTRUCTION
Item#:638-85002 Ramsey Hall Console
** Please make sure you have all parts indicated below prior to assembly.
Diagram 1
Assembly Steps:
1. Pull out drawers and place table top upside down on a soft surface to prevent from scratching
top.
2. Attach the posts(G) to the top(H) using bolts (C), lock washers (B), flat washers (A), secure all
bolts with allen wrench (D) in a clockwise direction (see Diagram 1).
3. Attach bottom panel to posts using bolts (C), lock washers (B), flat washers (A), secure all bolts
with allen wrench (D) in a clockwise direction (see Diagram 1).
4. Turn the table upright and put drawers back.

Diagram 2
ANTI-TIP RESTRAINTS:
5. a. Place the table in desired location. Mark wall with pencil.
b. Drill two holes into the wall using 1/4”drill bit and insert the plastic anchors (F).
c. Screw the hook (E) into the plastic anchor (F). Check and make sure the plastic anchor (F) is
securely held in the wall.
d. Set the table in place and hang the metal rings attached on back of console on to the hook
(E) (see Diagram2).
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.