Hooker Furniture 5072-55462 User manual

1
/3
ASSEMBLY INSTRUCTION
Item#: 5072-55462 Entertainment Console Base 78 inch
5072-55562 Entertainment Console Hutch
** Please make sure you have all parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more persons
Assembly Steps:
Diagram 1
1. Place the top of Hutch upside down on a soft surface to prevent from scratching. Attach left
end panel on top of Hutch with 2 flat washers (A), 2 lock washers (B), 2 bolts (C), tighten all
bolts securely with allen wrench (D). (See diagram 1)
Left End Panel

2
/3
Diagram 2
2. Attach top back rail on top of Hutch with 4 flat washers (A), 4 lock washers (B), 4 bolts (C) in the
center tighten all bolts securely with allen wrench (D).
Insert one back panel, center rail and the other back panel into the groove line of top back rail as
showed in diagram 2, the two back panels are exact same. (See diagram 2)
Diagram 3
3. Place bottom back rail onto the back panels. Then attach right end panel on the top of Hutch
with 2 flat washers (A), 2 lock washers (B), 2 bolts (C), tighten all bolts securely with allen
wrench (D).
Screw bottom back rail and top back rail to right end panel and left end panel by using 4 flat
washers (A), 4 lock washers (B) and 4 bolts (C), tighten all bolts securely with allen wrench (D).
(See diagram 3)
Top Back Rail
Back Panel Back Panel
Right End Panel
Bottom Back Rail
Top Back Rail
Bottom Back Rail
Center Rail

3
/3
4. Place the Hutch upright and face front.
Insert 2pcs of shelf pins (G) into the desired holes on one side of end panel. Place one side of
shelf on them and hold another side of shelf steady and higher than the desired holes on the
other side of end panel, then insert another 2pcs of shelf pins (G) into the other side of end
panel, now rest whole shelf on shelf pins with care and secure the shelf by using 4pcs of screws
(F). (See diagram 4)
5. Fix the wiring of touch switch on the inside of front right post of Hutch with 2pcs of clips (M) and
2pcs of screws (L), and install the touch switch (E) with 2pcs of screws (L). (See diagram 5)
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 5
Diagram 4