Hooker Furniture 5805-90019-99 User manual

1/2
ASSEMBLY INSTRUCTION
Item#: 5805-90019-99 Bench
** Please make sure you have all parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more people
Diagram 3 Diagram 4
Diagram 1
Diagram 2

2/2
Assembly Steps:
1. Put seat frame (K) upside down on a soft surface to prevent it from being scratched. Attach
center leg frame(H) to seat frame (K) by using bolts (A), lock washers (B) and flat washers (C),
tighten with allen wrench (D) in clockwise direction. Do not over tighten (See Diagram 1).
2. Screw full threaded rod (E) into metal stretcher (J) in clockwise direction.Thenalign one end
of full threaded rod (E) to the pre-drilled hole on center leg frame and through it .Screw full
threaded rod into another metal stretcher in clockwise direction(See Diagram 2).
3. Attach two side leg frames ( I ) to seat frame (K), aligh holes on two side leg frames to the
pre-drilled holes on seat frame (No need to tighten them). Make sure all three leg frames are
on the same level , place two ends of metal stretcher (J) into two side leg frames, align two
ends of metal stretcher to the pre-drilled holes on two side leg frames (See Diagram 3).
Then tighten two side leg frames by using bolts (A), lock washers (B) and flat washers (C),
tighten with allen wrench (D) in clockwise direction (See Diagram 3).
4. Insert 2 allen bolts (F) into two ends of metal stretcher , screw it with spanner at one end of
metal stretcher , meanwhile lock it at another end of metal stretcher.(Need two people to do
this step on boh ends at the same time).
5. Tighten all bolts.
6. Turn bench upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.