Hooker Furniture Hill Country 5960-10446-MULTI User manual

1/2
ASSEMBLY INSTRUCTION
(for connecting the wire of the light on this bookcase)
Item#: 5960-10446-MULTI Pleasanton Bunching Bookcase
*** Caution: Please read all instructions carefully before starting the assembly process.
Please note this bookcase can be used alone with can light on by a touch dimmer. Also, when
two or more are bunched together, you can control all can lights by touching one dimmer.
Diagram 1 Diagram 2
Assembly steps:
1. When each piece of bookcase is used alone, attach male connector of the power switch (A) to a
wall plug. (see diagram 1)

2/2
2. Touch dimmer is at the inside of right post.
3. If you want to bunch two or more bookcases together, place them all side by side in a desired
location.
4. Leave male connector of the can light (C) and female connector of power Switch (B) for the first
bookcase (#1) as it is. Keep male connector of the can light (C) and female connector of power
switch (B) off for the rest bookcases (#2, #3, and so on). (See diagram 2)
5. Connect female connector of the can light (D) (#1 bookcase) with male connector of power wire (E),
then have female connector of power wire (F) connected to male connector of the can light (C) (the
#2 bookcase). (See diagram 3)
Diagram 3
6. Repeat step 5 for the 3rd bookcase and the rest ones when more than two are bunched together till
each one is connected.
7. Plug in male connector of power switch (A) (#1 bookcase).
8. Touch the dimmer of the #1 bookcase, all can lights connecting together will be on at the same
time.
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp
cloth. Polish the finish with soft cloth and an industry recognized furniture polish.