HOOTBOOTH DSLR EventPRO User manual

HootBooth® DSLR EventPRO
Assembly Guide

HootBooth® MINI DSLR EventPRO Assembly Guide
2
1) Attach lower pedestal to base plate via
the two 3-pronged thumb screws.
2) Attach upper pedestal to lower pedestal
using the two 5-pronged thumb screws.
3) Place top piece onto upper pedestal and
attach using the two 5-pronged thumb
screws.

HootBooth® DSLR EventPRO Assembly Guide
3
4)Open back door using coin or flat- head
screwdriver. Run extension cord through the
hole in the bottom of the top piece and down
the pedestal. Plug power strip inside of top
piece into extension cord.
5) Press small gray button above ‘Power On’
label to power on the tablet.
6) Windows will boot on screen. The password
is: hootbooth
7) Connect tablet to your WiFi connection.
8) Please feel free to schedule your Software
Orientation per the link provided in your
Shipping Confirmation email.