Hoover CH83000 User manual

3-Gallon Carpet Spot Extractor
100 CFM / 804 Watt Motor
™

™
Dear Customer,
Congratulations on your purchase of your Hoover Spot Extractor
carpet and upholstery machine. The world of carpet cleaning is becoming more
high-tech and competitive and we strive to provide you with the most innovative
products. Our Carpet Spot Extractor is yet another example of this, bringing a new
dimension to carpet and upholstery cleaning with its cutting-edge features, quality
and design.
Please review this manual, paying careful attention to the Safety Instructions section.
Keep in mind that any unnecessary damage, neglect or abuse of this machine will
void your warranty. You can be condent that simple maintenance will ensure that
your extractor provides quality performance for many years to come.
If warranty questions arise, please consult your manual or contact your distributor.
Should you have any questions regarding maintenance, replacing parts or ordering
parts, please call an authorized distributor.
Before you begin using your extractor, please thoroughly review the Owner’s Manual.
Again, congratulations on your purchase of your Ground Command Spot Extractor.

TABLE OF CONTENTS
Warranty Information...............................................................................4
Return Material Authorization Procedure (RMA)....................................5
Safety Instructions....................................................................................6
Preparing Your Unit for Use.....................................................................6
Problem Solving.......................................................................................7
Wiring Diagram........................................................................................7
Machine Schematic...................................................................................8
Machine Parts Breakdown........................................................................9
Hose and Hand Tool Schematic and Parts Breakdown...........................10
™

This extractor

™

Drawing# Item ID Item Description Qty Needed
1 . SP-3-ST-BLK Black 3 Gal.Solution Tank 1.00
2 . SP-3-RT-BLK Black 3 Gal. Recovery Tank 1.00
3. 10-0383 6-32 x 1/4 Phil Pan Screw 6.00
4. 10-0400-D Latch for Sniper 1.00
5. 10-0412 C-Channel for Spotter Handle 2.00
6. 10-0414 Rivet for Spotter Handle 4.00
7. 10-0384 .125 Thick Nylon Washer 4.00
8. 10-0385 .06 Thick Nylon Washer 4.00
9. 10-0074 Flat Washer #8 SAE 5.00
10 . 10-0216 Allen Head Screw for Backpack 4.00
11 . 10-0379 8-32 x 3/8 Screw 4.00
12 . 10-0405 1 1/2" PVC SCH40 Slip Thread 1.00
13 . 10-0302-A Hatch Cover Gasket for Spotter 1.00
14 . 10-0416-A 1-1/2" Black ABS Stand Pipe 0.60
15 . 10-0304 Spotter Cap & Float Assembly 1.00
16 . 10-0419 Screw for Spotter Hatch 6.00
17 . SP-3-H-ORA-1 3 Gallon Spotter Orange Handle 1.00
18 . 10-0406 Nylon Barb 90 1/8" NPT 1/4" 2.00
19 . 80-0017-2 Bulk Head fitting for Spotter 1.00
20 . 10-0403 1/8" Brass Female Coupler 1.00
21 . 10-0402 1/8" Male QD 1.00
22 . 10-0434 Threaded Hose for Spotter 2.50
23 . 10-0407 1/8" Strait Nylon Barb NPT 4.00
24 . 10-0845-2 1/8" Strainer for Spotter 1.00
25 . 10-0300 55 psi Pump for Spotter 1.00
26 . 10-0301 L Bracket for Spotter 1.00
27 . 10-0435 Oetiker Clamp 4.00
28 . 10-0303 Roller Blade Wheel for Spotter 2.00
29 . 10-0387 5/16 x 1in Spotter Wheel Bolt 2.00
30 . 10-0022 Shoulder & Waist Belt Screw 1.00
31 . 10-0017 Deflector Screw 1.00
32 . 10-1028 Bottom Base Plate for Spotter 1.00
33 . 10-0492 Screw for Plates on Spotter 2.00
34 . 10-0014 Motor Screw 2.00
35 . 10-0380 10-32 x 3/8" Screw 2.00
36 . 10-1024 Motor Mount Plate for Spotter 1.00
37 . 10-0354 3 Gallon Spotter Motor 1.00
38 . 10-0386 Stamped Motor Screen 1.00
39 . 10-1030 Spotter Motor Gasket 1.00
40 . 10-0027-A Strain Relief Nut 1.00
41 . 10-1026 Switch Plate for 3 Gal. w/Heat 1.00
42 . 10-0027 Pigtail Strain Relief 1.00
43 . 10-0448 20 ft. Spotter/Air Mover Cord 1.00
44 . 10-0025 On/Off Switch 2.00
45 . 10-0400-C Keeper Latch for Sniper 1.00
™

Hoses and Hand Tool
Drawing# Item ID Item Description Qty Needed
1. 10-0501 4" Stainless Steel Uph. Tool 1.00
2. 10-0463 Black Slip Hose Cuff - Spotter 2.00
3. 50-1007 7 Ft. Black Hose for Spotter 1.00
4. 10-0474 1/8" Female QD for Spotter 1.00
5. 10-0475 Solution Hose for Spotter 1.00
6. 10-0388 Velcro Strap 1.00
7. 10-0402 1/8" Male QD 1.00
8. 10-0507 8" Black Hose for SS Hand Tool 1.00
9. 10-0506 Valve clamp for SS Hand Tool 1.00
10 . 10-0504 Valve for Stainless Hand Tool 1.00
11 . 10-0502 Jet for Stainless Hand Tool 1.00
™
3-Gallon Carpet Spot Extractor
100 CFM / 804 Watt Motor

™
[phone] ,ext. 2554