Hoover FF2-695 Installation instructions

USER INSTRUCTION
SIDE BY SIDE
REFRIGERATOR FREEZER
FF2-695

1~10
11~12
13~16
17~30

Childrenandvulnerablepeoplesafety
1

2

3

4

5

Caution!
• When using the ice making and cooling function,
make sure the water source and filter are
connected.
• Before using the product, the filter should be
rinsed with water for 5 minutes or 5L of water to
ensure that the toner in the filter is rinsed clean.
• After the refrigerator is connected to the water
source, exhaust treatment shall be carried out
according to the installation instructions. After
waiting 5 minutes, check the waterway for leaks.
6

• Ensure that the water pressure is within the
required specifications. Too high water pressure
is easy to cause water leakage, too low water
pressure can not support the product function.
• Do not touch the ice maker with hands or tools in
the process of use to prevent damage to
personnel or the ice maker.
• During using the product, please ensure that the
ice making machine and the ice storage box are
clean to avoid a large amount of dust, solid
debris and other pollutants falling into them.
• Do not allow children to take out the ice box to
prevent it from falling off and hurting.
• There are metal knives inside the ice box.
Children are not allowed to play with them to
avoid being hurt.
7

8

9

Packagingmaterials
Disposaloftheappliance
10

Control panel
Water/ ice Dispenser
(Remove away the metal compressor room cover)
Main control board
Power cord
Compressor
External main water valve
11

Ice box cover
Ice storage box
Freezer shelves*3
Freezer drawers*2
Freezer balcony*1
Water pipe connector
Fridge balcony*4
Fridge shelves*3
Fridge crispers*2
12

Product accessories
Water pipe parts * 1 Water filter * 1 Water pipe connector*1
Water filter connector*2
Anti-slip clips *8
Dispenser water tray * 1 User manual * 1
13

4. There is a water pipe connector at the bottom of the refrigerator freezer. Remove it from the
protective cover and disconnect from the water pipe, and remember to pull the water pipe out of
the lower hinge.
14

15

Location
Electricalconnection
Positioning
16

17
Important!
How to install the water filter and water pipe
1.Before installing, the filter should be rinsing with water for 5 minutes or 5L of water to ensure that the
toner in the filter is rinsed clean.
Water source
Connect tube
Filter
Basin
2. Open the refrigerator door and take out the crispers.
3. Take out the rubber plugs on both sides of the water box.
Rubber plugs
Water box

4. Take out the water filter from the accessory bag, insert the connectors on both sides of the filter, then
connect the water pipe and clamp into the anti-slip clips (pay attention to the direction of the filter arrow)
Water filter
Connectors
Water pipes
Anti-slip clips
18
5. Assemble the water filter parts with retaining bracket above the water box, and connect the water
pipes of water box with water filter.
Fix the water filter parts
Connect the water pipes
of water box with filter
6. Take off the rubber plug. Connect the water pipe part to the main valve on the compressor cover
with connector, and remember to insert the anti- slip clips, then connect the end of the water pipe
with the nut to the water source.
Take off the rubber plug Connect the water pipe with
connector,and remember to
insert anti-slip clips on both
side of connector.
Water pipe connect the end of the
water pipe with the nut
to the water source
Water source