Hoover HVBN6182XWDK Mounting instructions

HVBN6182WWDK
HVBN6182XWDK
HVBN6182BWDK

roubleshooting
SCRAPPING OLD APPLIANCES
ENERGY SAVING
7
7
4
3
Control panel
Using your appliance
Cleaning and care
Installing your new appliance
Description of the appliance
T
Disposal of the appliance
14
16
Assembling
17
Helpful and hints and tips
Dispensing water
18
18
Receiving Water
19
21
23
25

Thank you for purchasing this product.
Before using your refrigerator, please carefully read this instruction
manual in order to maximize its performance. Store all documentation
for subsequent use or for other owners. This product is intended solely for
household use or similar applications such as:
- the kitchen area for personnel in shops, offices and other working
en ironments
- on farms, by clientele of hotels, motels and other en ironments of a residential
type
- at bed and breakfasts (B & B)
- for catering ser ices and similar applications not for retail sale.
This appliance must be used only for purposes of storage of food, any other
use is considered dangerous and the manufacturer will not be responsible for
any omissions. Also, it is recommended that you take note of the warranty
conditions.

SAFETY INFORMATION
The refrigerator contains a refrigerant gas (R600a:
isobutane) an insulating gas (cyclopentane), with
high compatibility with the environment, that are,
however, infl ammable.
We recommen that you follow the following
regulations so as to avoi situations angerous
to you:
Before performing any operation, unplug the power
cor from the power socket.
• The refrigeration system positione behin an
insi e the Wine Coolers contains refrigerant.
Therefore, avoi amaging the tubes.
• If in the refrigeration system a leak is note , o
not touch the wall outlet an o not use open
flames. Open the win ow an let air into the room.
Then call a service centre to ask for repair.
• Do not scrape with a knife or sharp object to
remove frost or ice that occurs. With these, the
refrigerant circuit can be amage , the spill from
which can cause a fire or amage your eyes.
• Do not install the appliance in humi , oily or usty
places, nor expose it to irect sunlight an to
water.

• Do not install the appliance near heaters or
inflammable materials.
• Do not use extension cor s or a apters.
• Do not excessively pull or fol the power cor or
touch the plug with wet han s.
• Do not amage the plug an /or the power cor ; this
coul cause electrical shocks or fires.
• It is recommen e to keep the plug clean, any
excessive ust resi ues on the plug can be the
cause fire.
• Do not use mechanical evices or other equipment
to hasten the efrosting process.
• Absolutely avoi the use of open flame or
electrical equipment, such as heaters, steam
cleaners, can les, oil lamps an the like in or er to
spee up the efrosting phase.
• Do not use or store inflammable sprays, such as
spray paint, near the Wine Coolers. It coul cause
an explosion or fi re.
• Do not use electrical appliances insi e the foo
storage compartments, unless they are of the type
recommen e by the manufacturer.
• Do not place or store inflammable an highly
volatile materials such as ether, petrol, LPG,
propane gas, aerosol spray cans, a hesives, pure
alcohol, etc. These materials may cause an
explosion.
• Do not store me icine or research materials in the
Wine Coolers. When the material that requires a
strict control of storage temperatures is to be

store , it is possible that it will eteriorate or an
uncontrolle reaction may occur that can cause
risks.
• Maintain the ventilation openings in the appliance
enclosure or in the built-in structure, free of
obstruction.
• Do not place objects an /or containers fille with
water on the top of the appliance.
• Do not perform repairs on this Wine Coolers. All
interventions must be performe solely by
qualifie personnel.
• This appliance can be use by chil ren age from 8
years an above an by persons with re uce
physical, sensory or mental capabilities or with a
lack of experience an knowle ge; provi e that
they have been given a equate supervision or
instruction concerning how to use the appliance in
a safe way an un erstan the hazar s involve .
• Chil ren shoul not play with the appliance.
Cleaning an user maintenance shoul not be
ma e by chil ren without supervision

SCRAPPING OLD APPLIANCES
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE)
WEEE contains both polluting substances (which can cause negative consequences for the
environment) and basic components (which can be re-used) It is important to have WEEE subjected to
specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all
materials
- WEEE should not be treated as household waste;
- WEEE should be handed over to the relevant collection points managed by the municipality or by
registered companies In many countries, for large WEEE, home collection could be present
In many countries, when you buy a new appliance, the old one may be returned to the retailer who has
to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has
the same functions as the supplied equipment
Conformity
By placing the mark on this product, we are confirming compliance to all relevant
European safety, health and environmental requirements which are applicable in legislation
for this product
Energy Saving
For better energy saving we suggest :
Installing tge appliance away from heat sources and not exposed to direct sunlight and in a
well ventilated roo
Avoid putting hot food into the refrigerator to avoid increasing the internal temperature and
therefore causing continuos functionaliting of the compressor
Do not excessively stuff foods so as to ensure proper air circulation
Defrost the appliance in case there is ice to facilitate the transfer of cold
In case of absence of electrical energy, it is advisable to keep the refrigerator door closed
Open or keep the doors of the appliance open as little as possible
Avoid adjusting the setting to temperatures too cold
Remeve dust present on the rear of the appliance
7
Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is
essential to follow some basic rules:

8
Installing your new appliance
Ventilation of appliance
Before using the appliance
for the first time, you should
review the following tips.
In order to improve
efficiency of the cooling
system and save energy, it
is necessary to maintain
good ventilation around the
appliance. For this reason,
sufficient clear space
should be available around
the refrigerator.
It is advisable for there to
be at least 75mm of space
from the back to the wall, at
least 100mm from its top,at
last 100mm from its side to
the wall and a clear space
in front to allow the doors to
open 130°. Please see the
following diagrams.
Note:
This appliance performs
well within the climate class
from SN to T showed in the
table below.
●
It may not work properly if
left at a temperature above
or below the indicated
range for a long period.
Climate class Ambient temperature
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
Stand your appliance in a
dry place to avoid moisture
damage.
Keep the appliance out of
direct sunlight, rain or frost.
Stand the appliance away
from heat sources such as
stoves, fires or heaters.
Leveling of appliance
For sufficient leveling and
air circulating in the lower
rear section of the
appliance, the bottom feet
may need to be adjusted.
You can adjust them
manually using a suitable
spanner.
●
●
●
75
100
100
130°
100
100
765
1271
990

To allow the doors to self-
close, tilt the top backwards
by about 10mm.
●
Reversing the door
The side at which the door
opens can be changed,
from the right side (as
supplied) to the left side, if
trequired.
Warning! When reversing
the door, the appliance
must not be connected to
the mains. Ensure that the
plug is removed from the
mains socket.
Note: If required you may
lay the refrigerator on its
back in order to gain
access to the base you
should rest it on soft
foam packaging or similar
material to avoid damaging
the backboard of the
refrigerator. To reverse the
door the following steps
are generally
recommended
1. Stand the refrigerator
upright Open the upper
door to take out all door
racks and tank(to avoid
damage) and then close
,
,
.
.
≤10mm
Tools you will need
9
Stop Block Left Hinge Cover
8mm wrench
8mm socket wrench
Monkey wrench
Thin-blade screwdriver
Cross-shaped screwdriver
2. Remove the upper cover
and corner cover on
the top of the upper door,
then remove right hinge
cover and hinge cover
and block cover on
top of the cabinet.
① ②
③
④, ⑤
Door racks
Water tank

3. Remove the 2 screws
which are used for fixing
the right upper hinge part
(see the picture above).
⑥
4. Remove the upper door
from the middle hinge by
carefully lifting the door
straight up.
Caution! Please hold the
upper door in place during
step 3 to prevent the door
dropping.
10
5. Place the upper door on
a smooth surface with its
panel upwards. Loose
screw and part
then loose screw and
part Install
replacement stop block
provided (in the plastic bag)
to the left side with screw
, then install part with
screw . Keep part
with the appliance for future
reference.
④ ③,
②
①.
② ③
④ ①
①Upper cover
②Corner cover
③Right Hinge Cover
⑥Right upper hinge part
⑤Block Cover
④Hinge Cover
6. Loosen screws used to
fix the middle hinge and
remove middle hinge. Then
remove the lower door.
①Door holder
①
②Self-tapping screw
②
④Self-tapping screw
④
③Stop block
③