Hoover 2240 classic User manual

Classic
ROBOT
Edge Cleaning Side Brushes
Cliff Sensor
Includes Additional
Accessories
Robot Vacuum
Cleaner
Lightweight
200
MILLILITRES
Water Capacity

3
5
1
2
76
4
8
10 11 129
13 15 1614
Batteries not included. Remote control - 2 x AAA size battery required. Virtual Wall - 2 x D size battery required.

2240 Robot
Specifications:
Voltage: 14.4V
Input of charging base: 24V 1A
Features
Please contact Hoover Customer Care 1300 360 845,
NZ [phone] to find your local spare parts provider.
Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many useful
features built into your vacuum cleaner and we recommend that you carefully read this instruction
manual so that you may take best advantage of them.
Features:
1. Infrared Sensor
2. Battery Life Indicator (light on = Power on)
3. Easy Grab Handle
4. Operating Buttons
5. Side Brush
6. Removable Dust Bin
7. Battery Charger Socket
8. Power Switch
9. Virtual Wall Unit
10. Mains Power Adaptor
11. Rechargeable Battery Pack (Installed)
12. Charging Base Plate
13. Spoon
14. Filter
15. Remote Controller
16. Cleaning Brush

Infrared
sensor
Sensors
Sensors
Side brush
Rechargeable
battery
(not shown)
Opera
ting
buttons
Removable
dust bin
Easy to
grab handle
Battery
life indicator
Power
switch
Battery
charger socket
Vacuum inlet lid
Main brush
Filter
Robot Vacuum

Features
Virtual Wall unit
0-5m
0-3m
0-1.5m
LCD Display
Function setting key
Signal sensor
Charging base plate
The Virtual Wall Unit has three
setting options to choose from
depending on the size of the r
oom.
Power indicator
Power switch
Range selector switch
Infrared wave emitter
Charging Station
CAUTION! Do not use the infrared wave emitter to point at the eyes!

Before you Begin
This cleaner must be operated in accordance with these instructions and used only for domestic household
cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not
fit to be used as an industrial cleaner hence will void the manufacturer’s warranty if used inappropriately.
Please read these instructions thoroughly
This will ensure you obtain full benefit from your new cleaner. Keep this Instruction Manual in a handy place
for future reference.
Important
Always switch the cleaner off and remove the plug from the electricity supply before cleaning your
appliance, when not in use, or attempting any maintenance task. The cleaner must only be connected to
an AC supply at the voltage shown on the rating plate. This cleaner should only be used for its intended
purpose as described in these instructions.
Precautionary measures:
1. Do not operate the vacuum cleaner too close to heaters, radiators, and other hot surfaces.
2. Before inserting the plug into the wall, make sure your hand is dry.
3. Before turning on the vacuum cleaner, remove any large or sharp objects from the floor or
cleaning surface in order to prevent damage to the filter.
4. When you want to pull the plug from the wall, do not use the power cable, gently pull the
plug from the power socket.
5.
If the hose inlet, combination floor tool or telescopic tube are blocked, you should switch off
the cleaner straight away and remove from mains power. First clear the blocked substance
before attempting to start the vacuum cleaner again.

Warning
WARNING:
Electricity can be extremely dangerous. This
appliance is powered by rechargeable Ni-MH
batteries and is provided with a charging base
plate. Please ensure the voltage marked on the
mains power adaptor is suitable for connection to
standard mains power outlet voltage.
REMINDERS:
• Always store the appliance indoors. Do not
use outdoors or expose the appliance to the
elements, humidity or heating sources (oven,
fireplace, wet floor).
• Do not expose the Robot or accessories to
excessive heat/cold (Keep between 0-30°C).
• Do not drop the Robot or use any accessory if it
has been dropped, damaged, left outdoors or
dropped in water.
• Never unplug or pull the mains power adaptor
by the power cord.
• Never pick up matches, hot ash, cigarette ends,
or sharp objects.
• Do not spray with, or pick up flammable liquids,
cleaning fluids, aerosols, or their vapours, as this
may increase the risk of fire/explosion.
• Do not continue to use your Robot if it appears
to be faulty. If the mains power adaptor power
cord is damaged, stop using it IMMEDIATELY:
to avoid a safety hazard, only an authorised
Godfrey’s Service technician must replace the
Power Cord.
• This Robot is for use on wooden flooring, rubber,
ceramic tile, linoleum and short pile carpet.
• Do not use to clean stairs.
After Use:
Return the Robot to the Charger Base
Station. Always switch off and disconnect
the mains power adaptor before cleaning
or attempting any maintenance task. If
the Robot will not be used for a long
time (several weeks), unplug the
Charger Base Station according to the
instructions in this User Manual.
Safety with children, the
elderly or infirm:
This cleaner is not a toy.
Do not let children play with
the appliance or its controls.
Please supervise the use of the
appliance by older children,
the elderly or the infirm.
Safety Precautions and Warnings

Safety Precautions and Warnings
CAUTION
No one else can disassemble, maintain or transform
the product except the maintenance technicians
designated by our company, or it may cause fire,
electric shock or personal injury.
Don’t use other chargers only the one supplied with
the unit or it may cause product damage, electric
shock or fire due to high voltage.
Don’t touch high-voltage power cable of the electric
appliance with your hands or it may cause electric
shock.
Don’t bend the power cable overly or place weight
on it, or it may cause power cable damage, fire or
electric shock.
Don’t twist clothes or any part of the body (head,
finger, etc.) into the brush or wheel of the Robot, or
it may cause personal injury.
Don’t approach cigarette, lighter, match and other
heat objects or combustible materials such as the
gasoline cleaner.
ATTENTION
Don’t forget to turn off the power while transporting
or storing the cleaner for long or the battery may
be damaged.
Insert the power cable of the charger well or it may
cause electric shock, short circuit, smoking or fire.
Check that the charger and socket are connected
well, or it may cause charging failure or even fire.
Remove all easily damaged objects (including
luminous objects, fabrics, glass bottles, etc.) before
using, or it may cause damage to these objects or
affect the use of the cleaner.
Please use the cleaner cautiously in the presence of
children to avoid frightening or harming them.
vDon’t stand or sit on the cleaner, or it may cause
damage to the cleaner or personal injury.
Don’t allow the cleaner to suck up any water or
other liquids to avoid damage to the product and
harm to yourself.
Don’t use the cleaner on small tables and chairs or
other small spaces, otherwise the cleaner may be
damaged.
Don’t use the cleaner outdoors, or it may cause
damage to the product.
Don’t use the cleaner in commercial places, or the
cleaner may be damaged by excessive use.
Don’t leave movable threads, wire and other objects
with the length of more than 150mm on the ground
or the brush may be entangled.
The cleaner is not for by the disabled (people with
physical or mental handicap) or children. Users of
the cleaner should read the manual before operating
the unit.

Assembly
Assembly
WARNING! The cleaner should be switched off and disconnected from
the mains power supply before assembling.
Wall xing plate
Battery charger socket
Outlet
Outlet
Battery charger socket
Setting the Auto Charging Base Plate
1. The cleaner may be charged directly by the charger as well as by the auto
charging base plate. If the battery is about to run out, the indicator will turn
blue and the cleaner will automatically stop cleaning and seek the charging
base plate for charging when machine is set under turbo and timing mode.

Assembly (continued)
2. For charging with auto charging base plate, the plug of charger should be inserted into the
DC socket at the back of the base plate, meanwhile, the screen on the base plate will display
the time, etc.
3. The charging base plate must be correctly installed and be placed on the floor with the back on
the wall and no object under it. The base plate may be fixed on the wall by the soft glue on the
wall fixing plate space. (Remove the paper from the wall fixing plate and fix the charging base
plate on the wall with the adhesive).
4. In order to prolong the life of the battery, it should be charged for 8-9 hours for the first use or
when being used again after a long time. It can only reach its best performance after 2-3 cycles
of charging and discharging.
5. While charging, the charging light (on top of the unit) will flash indicating that the battery is being
charged, once full charged, the charging light will remain on.
6. If the room is too large and the cleaner cannot find the charging base plate immediately, you may
manually return it to the base plate.
Place the cleaner 1.5m
away from the base
plate, and then press the
power switch and Turbo
Clean key. Alternatively,
return the cleaner near to
the base plate and it will
automatically find it and
begin to charge.