Hoover 5210 HERITAGE User manual

H
5210
HERITAGE
Bagless
Technology
Multi Function Including
Detachable Hand Vac
Hepa Filtration
Dual function 2 in 1
Cordless Stick Vac
Cyclonic

5210 Heritage
Congratulations on the purchase of your new HOOVER vacuum cleaner.There are many
useful features built into your cleaner and we recommend that you carefully read this
instruction manual so that you may take best advantage of them.
Features:
1. On/Off Button (on Unit)
2. Handle Release Button
3. Hand Vac Release Button
4. On/Off Button (on Hand Vac)
5. 3 in 1 Accessory
6. Hand Vac
7. Brush Release Button
8. Charging Base
9. Body of stick vac
10. Turbo Head
11. Dust Cup Release Button
12. Charger
Specifications:
Voltage: 14.4V
Rated power: 80W
Type of charger: LKC-173030-S
Input of charger: 100-240V~50/60Hz
Output of charger: 17.3V-300mA
Type of turbo brush: EB265B
Rated power of Turbo brush: 6W
5
12
9
6
1
2
3
7
10
4
11
8
Features

Before you Begin
Before you begin
The cleaner must be operated in accordance with these instructions and used only for domestic household
cleaning to remove DRY dirt and dust from household carpets, flooring and fabrics.This cleaner is not fit to
be used as an industrial cleaner, and is not designed for the collection of vitreous building material including
particle board, construction products and similar products such as wood/fibres, cement, fillers, fibre glass
etc or excessive or frequent sand. The infrequent pick-up of these materials in these circumstances may be
harmful to your cleaner and may void the manufacturer’s warranty.
Please read these instructions thoroughly
This will ensure you obtain full benefit from your new cleaner. Keep this Instruction Manual in a handy place
for future reference.
Important
Always switch the cleaner off and remove the plug from the electricity supply before cleaning your
appliance, when not in use, or attempting any maintenance task.The cleaner must only be connected to
an AC supply at the voltage shown on the rating plate.This cleaner should only be used for its intended
purpose as described in these instructions. Never operate the vacuum cleaner without lters.
Precautionary measures:
1. Do not operate the vacuum cleaner too close to heaters, radiators, and other
hot surfaces.
2. Before inserting the plug into the wall, make sure your hand is dry.
3. Before turning on the vacuum cleaner, remove any large or sharp objects from the floor
or cleaning surface in order to prevent damage to the filter.
4. When you want to pull the plug from the wall, do not use the power cable, gently pull
the plug from the power socket.
5.
If the air inlet or floor head are blocked, you should switch off the cleaner straight
away and remove from mains power. First clear the blocked substance before
attempting to start the vacuum cleaner again.

W
arnin
WW
g
the appliance has finished charging.
morftcennocsiD.esunitonnehwylppusrewopsniamehtotdetcennocregrahcehtevaeltonoD.1
any power supply before performing any maintenance duties.
2. To reduce the risk of electric shock, do not use outdoors or on wet surfaces
3. This appliance must not be used as a toy. Do not allow children to use the appliance unattended.
deniltuoesohttpecxeesopruprehtoynarofesutonoD.launamnoitcurtsnisihtnidebircsedsayl
noesU.4
in this instruction manual.
5. If the power cable or plug appears damaged, do not use. If the cleaner is not working correctly, has been
dropped, damaged, left outdoors, or dropped into water, return toa Hoover service agent or contact Hoover
elbacrewopehtllupro,eldnahasaelbacrewopehtesu,elbacrewopehtybecnailppaehtyrracrolluptonoD.6
around sharp edges or corners. Avoid running the appliance over the power cable.
7. Keep the appliance away from heated surfaces.
8. Unplug the charger by lightly grasping and pulling the plug from the wall. Do not unplug the charger by pulling
on the power cable.
9. Do not handle the appliance and/or power cable with wet hands.
10. Always ensure that all openings and entry points on the appliance are clear from objects or any blockages
before commencing use. Removal of dust, lint, hair and dirt from all openings and entry points will help improve
13. Use extra care when cleaning on stairs.
combustible liquids (i.e. gasoline, hot ashes, cigarettes,
matches or anything burning) or use in areas where such substances and items may be present.
16.
17.
18.
avoid a hazard.
Instructions for Use
Always remove the plug from the power socket before fitting or removing accessories!
Connection for hand vac and body
a. Body of stick vac
b. Hand vac
c. Air inlet
d. Hand vac release button
a
b
c
d
been
for
appliance.
Warning

Instructions for Use
Connection for hand vac and body
a. Body of stick vac
b. Connector of brush
c. Hole to connect with brush
d. Brush release button
a
b
c
d
Instructions for Use (continued)
Handle bending and locking
a. Handle release button
a

Instructions for Use
Connection for 3 in1 accessory
a. Crevice nozzle
b. Sofa brush
a
b
Instructions for Use (continued)
Connection for 3 in1 accessory
Small brush
Sofa brush
3 in 1
accessory
Holder for
accessory
Longer extension
of brush

Instructions for Use
Charging the cleaner
1. Connect the power plug on the
battery charger to the power socket.
2. Connect the stick vac to the charging
base. The stick vac should be able
to stand alone once correctly
connected to the charging base.
3.The indicator on the cleaner turns
red whilst it is charging. Once fully
charged the indicator will turn green
(approximately 6-8 hours).
4. Once the stick vac has been
charged it can be removed from
the charging base for use or it
can remain on the charging base
which also acts as a holder.
Note: Once the stick vac has been
fully charged, it is recommended that
the charging base is unplugged from
the mains power supply.
Support
board
Connect hole
Connector
Instructions for Use (continued)
How to operate the stick vac
Hand vac
1. Press the button under the handle of the hand vac
to release the unit from the body of the cleaner.
2. Press the on/off button to turn on the hand vac
– a blue light will appear when the hand vac is
operational.
3. Press the on/off Button to turn the hand vac off.
Stick vac
1. Ensure the hand vac is placed back into the body
of the stick vac.
2. Press the on/off button at the handle end of the
stick vac to turn on the stick vac. A blue light will
appear on the electrical brush head when
the stick vac is operational.
3.
Press the on/off Button to turn the stick vac off.
On / off button
On / off button
Indicator

Instructions for Use
Operation for turbo brush
1. The turbo brush on this stick vac can
be used on short haired carpet and
hard floors.
2. This brush has been manufactured
with a stop protection device, which
acts as a safety switch and will
activate and stop the stick vac in the
event a child places his/her fingers
on the roller brush or if anything gets
stuck in the brush.
3. If the stop protection has been
activated the stick vac can be
re-started after 5 minutes – allowing
enough time for the motor to
re-adjust.
Carpet Hard Floor
Instructions for Use (continued)
Use of 3 in 1 accessory
This stick vac comes with a
3 in 1 accessory:
Soft Brush – for cleaning upholstery.
CreviceTool – to clean in between
tight spaces.
• Usethesofabrushtoclean
sofas, beds etc.
• Usethecrevicenozzleto
clean corners, stairs and
keyboards etc.
• Usethe2in1brushto
clean furniture, book
shelves, curtains etc.
Small brush
Extension of brush for cleaning hard to reach places
Sofa brush

Maintenance
Maintenance
Cleaning and changing parts
Dust cup and lter system cleaning
1. Push the button to release the dust cup from
the hand vac
2.Take the dust cup (as shown), pull back the clear
cover to pour out dust. Close the cover.
3. Remove the HEPA filter from the side of the
dust cup and replace with a new HEPA filter.
Dust cup assembly
Dust cup release
Cyclone cover
Cyclone cone
HEPA
Dust cup
Filter assembly
Turbo brush cleaning
1. Use a screw driver to rotate the
locking button.
2. Remove the cover, take the roller
out and clean it gently by removing
all dust, dirt etc. (do not clean with
water or any liquids).The roller can
also be replaced with a new roller
if necessary.
3. Re-assemble the roller and cover
after cleaning or replacement.
Locking button
for the cover
Cover
Roller

Maintenance
Troubleshooting Customer Care
Problems and solution
If you come across a problem, please use the checklist of troubleshooting tips before ringing
Hoover Customer Care.
Stick vac does
not work •Doesthebatteryneedcharging?
•Hasthehandvacbeenassembledcorrectlybackintothebody
ofthestickvac?
Suction power
has decreased •Checkthedustcup,isitfullanddoesitneedtobeemptied?
•IstheHEPAlterblocked?Doesitneedtobereplacedorcleaned?
•Isthereablockageintheairinlettunnelorontherollerofthe
turbobrushthatneedstoberemoved?
The stick vac will
not charge •Isthechargerconnectedcorrectlytothepowersocket?
•Isthepowerplugonthechargerconnectedtothebaseofthecharger?
•Hasthehandvacbeencorrectlyassembledtothebodyofthestickvac?
The cleaner has
been charged
but unable to get
enough run time
from the cleaner
•Hasthestickvacbeenfullycharged–6-8hours?
•Doesthebatteryrequirereplacement?
Part Part Number
Filter 32200739
Cone lter assembly 32200738
Charger 33200733
Brush bar assembly 33701711
Please contact Hoover Customer Care: 1300 360 845 to find your local spare parts provider.