Hoover HE710HM 021 User manual

*Certain Models Only **May vary according to models
PRINTED IN P.R.C.
48034682
V
W
X*
Y*
Y
USER MANUAL (GB) ..............................P 01
MANUEL D’UTILISATION (FR) ...............P 05
BEDIENUNGSANLEITUNG (DE) ..........P 09
MANUALE ISTRUZIONI (IT) ...................P 13
AS1
S2
T
N2**
N**
U
Q1
R**
GP
O* P
N1*
M1*
L
12
M*
B
D1**
F**
C
EG
H
K
I
J
D4*D3* D2*
Q2* Q3*

1
**
56
**
7** 8
**
9
**
3
**
2
1211
4 13 14 15
**
10
17 18
16
20
19
21
*Certain Models Only**May vary according to models *Certain Models Only **May vary according to models
PUSH
a
c
b
H60
HOOVER

1
INSTRUCTIONS FOR SAFE USE
This appliance should only be used for domestic cleaning,
as described in this user guide. Please ensure that this guide
is fully understood before operating the appliance.
Do not leave the appliance plugged in. Always switch off
and remove the plug from the socket after use, or before
cleaning the appliance or any maintenance task.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
If the power cord is damaged stop using the appliance
immediately. To avoid a safety hazard, an authorised
HOOVER service engineer must replace the power cord.
Keep hands, feet, loose clothing and hair away from rotating
brushes.
Use only attachments, consumables or spares recommended
or supplied by HOOVER.
Static electricity: Some carpets can cause a small build up
of static electricity. Any static discharge is not hazardous to
health.
Do not use your appliance out of doors or on any wet surface
or for wet pick up.
Do not pick up hard or sharp objects, matches, hot ashes,
cigarette ends or other similar items.
Do not spray with or pick up ammable liquids, cleaning
uids, aerosols or their vapours.
Do not run over the power cord when using your appliance
or remove the plug by pulling on the power cord.
Do not continue to use your appliance if it appears faulty.
Do not stand on or wrap the cord around arms or legs when
using your appliance.
Do not use the appliance to clean animals or people.
Do not position the appliance above you when cleaning the
stairs.
HOOVER service: To ensure the continued safe and
efcient operation of this appliance we recommend that any
servicing or repairs are only carried out by an authorised
HOOVER service engineer.
The Environment
The symbol on this appliance indicates that this appliance may not be treated
as household waste. Instead it must be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. Disposal must be
carried out in accordance with local environmental regulations for waste disposal. For
more detailed information about treatment, recovery and recycling of this appliance,
please contact your local city ofce, your household and waste disposal service or the
shop where you purchased the appliance.
This appliance complies with the European Directives 2014/35/EU, 2014/30/EU and
2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy
GB

2
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release the hose: simply press the two latches on the hose end and pull. [1]
2. Connect the hose handle to the upper tube end. [2]
3. Connect the tube lower end to the carpet and oor nozzle** or accessories if
required. [3**]
USING YOUR CLEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red mark. [6]
2. After connecting the telescopic tube lower end to Carpet and Floor Nozzle** or
accessories if required, press the oor type selector* pedal on the nozzle to select
the ideal cleaning mode for the oor type:
Hard Floor: Brushes are lowered to protect the oor.
Carpet: Brushes are raised for deeper cleaning.
*Certain Models Only ** May vary according to model
GETTING TO KNOW YOUR CLEANER 3. Adjust the telescopic tube to the desired height by moving the telescopic tube
adjuster** up and raise or lower the tube to the most comfortable cleaning position.
[5**]
Carpet & Floor nozzle** :
- Hard Floor Cleaning: Press the pedal on the nozzle to switch to Hard Floor mode
and adjust the suction control slider on the nozzle to MAX (maximum). In this position
brushes are lowered to protect hard oors. [4a]
- Standard Carpet : Press the pedal on the nozzle to switch to Carpet mode and
adjust the suction control slider on the nozzle to MAX (maximum). In this position
brushes are raised. [4b]
- Long Pile Carpet: Press the pedal on the nozzle to switch to Carpet mode and
adjust the suction control slider on the nozzle to MIN (minimum) mode. It can also be
used to reduce the operating push force. [4c]
4. Switch the cleaner on by pressing the On/Off Pedal on the cleaner main body. [8]
AUTO MODE FUNCTION:
This vacuum cleaner features smart sensors able to detect the amount of dust and debris
on your oors and automatically adjust the power level. When the cleaner detects a big
quantity of dust it will increase the power, And when the cleaner recognizes the oor is
clean, the power will automatically decrease.
- For models equipped with rotary knob control: turn the rotary knob control on
AUTO MODE and the automatic function will be set. [D1]
- For models equipped with LED Display: the cleaner starts in AUTO MODE, on
display Auto Mode will be illuminated. To regulate the power level manually, press
MANUAL MODE Activation button on the control panel. [D3]
POWER LEVEL REGULATION:
- For models equipped with rotary knob control: Select the power setting by
turning the rotary knob on the cleaner or use the suction regulator on the handle.
[D1,9]
- For models equipped with LED Display: Press Manual Mode Activation Button
[D4] on the control panel, on the display MANUAL MODE will be illuminated. Then
you can press the manual button to choose the desired power setting or use the
suction regulator on the handle. [9]
5. Switch the cleaner off at the end of use by pressing the On/Off Pedal. Unplug and
rewind the power cord by pressing the cord reel pedal.
6. The tube can be parked for temporary storage while in use, or in the storage position
when not in use. [10]
A. Main Cleaner
B. Bag Door
C. Exhaust Filter Cover
D1. Rotary knob control** with Auto Mode
. LED Display** with power control,
Auto and Manual modes, Bag Check
Indicator and Filter Cleaning Indicator
D3. Auto Mode Activation Button*
D4. Manual Mode Activation Button*
D. On/Off Pedal
E. Bag Check Indicator**
F. Cord Reel Pedal
G. Carry Handle
H. Bag
I. Bag Holder
J. Bag Door Release Latch
K. Hose
L. Intelligent Handle With Soft Grip,
and Integrated Dusting Brush*
M1. Suction Regulator*
M. Telescopic Tube**
N1. Telescopic Tube Secure Connection*
N2. Telescopic Tube Adjuster**
N. Carpet and Floor Nozzle
Secure Connection*
O. Floor Type Selector Pedal
Q1. Nozzle Suction Control Slider
Q2 MIN Mode*
Q3. MAX Mode*
R. Carpet and Floor Nozzle (GP)**
S1. Pre-Motor Filter Frame
S2. Pre-Motor Filter
T. Exhaust Filter
U. Tools Holder
V. Crevice Tool
W. Furniture Nozzle
X. Pet Hair Remover Mini Turbo Nozzle*
Y. Parquet Nozzle*
GB

3
*Certain Models Only ** May vary according to model
GB
CLEANER MAINTENANCE
For models equipped with LED display, * (see ) both full bag and lter cleaning
are signaled by a specic red light on the display.
For models equipped with rotary knob control (see D1), the red LED turns on if
the bag is full and/or if some obstructions occur.
Replacing the Dust Bag
Please check the bag, if necessary, replace it.
1. Press the bag door release latch and open the bag door.
[11]
2. Lift the handle of the bag holder up. [12]
3. Hold the bag with the holder over a bin. Press the red button to automatically release
the bag without any contact with dust.
[13]
4. Fold a new bag and insert the collar into the bag holder. [14,15]
5. Ret the bag with holder back into the appliance. [16]
6. Close the bag door.
WARNING: The bag door will NOT close if the dust bag and/or the bag holder are not
assembled to the cleaner. Always ensure the bag is present when closing the bag door.
REMEMBER: The bag check indicator also turns red (F or )** if an obstruction occurs. In
this case refer to ‘Removing a Blockage from the System’.
Cleaning the Filters
To ensure constant optimum cleaning performances:
- For models equipped with LED display* (see ): please wash the lters when
the lter indicator red light is on and then press the MANUAL MODE activation
button for 3 seconds to turn off the red indicator light.
- For models not equipped with LED display, please wash the lters after each
5 bag changes.
Cleaning the pre-motor lter:
1. Lift the bag door release latch to open bag door and remove the bag. [11,12]
2. Remove the pre-motor lter frame from the cleaner. [19]
3. Remove the lter from the pre-motor lter frame. [20]
4. Wash the pre-motor lter and the pre-motor lter frame using warm water, and allow
it to dry thoroughly before inserting into the cleaner. [20,21]
Cleaning the exhaust lter:
1. Unclip the exhaust lter cover and remove the exhaust lter pack. [17,18]
2. Wash the exhaust lter pack under warm water, and allow it to dry thoroughly before
inserting into the cleaner. [20,21]
Remember: Do not use hot water or detergents. In the unlikely event of the lters
becoming damaged, t a Genuine Hoover replacement. Do not try and use the product
without dust bag or lters tted.
Cleaning the permanent cloth dust bag* (*Certain model only)
To maintain optimum performance we recommended that you wash the permanent cloth
dust bag after every 5 full bags. Empty the contents of the bag into a bin, wash the bag
under warm water, remove excess water and leave to dry fully before replacing.
Removing a blockage from the system
If the bag check indicator remains lit (F or ):
1. Check if the bag is full. If so refer to ‘Replacing the Dust Bag’.
2. If it is not full, then
A. Do the lters need cleaning? If so refer to ‘Cleaning the Filters’.
B. Check if there is any other blockage in the system.
- Use a cord or a stick to remove any blockage from the telescopic tube or exible hose.
Warning - The bag check indicator will remain red*or lit* if the cleaner is used when
the bag is full, if there is a blockage or if the lters are dirty. If the cleaner is used for a
signicant period of time with the bag check indicator illuminated, a thermal cut out will
switch the cleaner off to prevent overheating. The bag check indicator turns off once
the cleaner has switched off to signal that the thermal cut out has been activated. If this
should happen, switch the cleaner off, unplug and correct the fault. It will take about 30
minutes for the cut out to automatically reset.
ACCESSORIES
To obtain the best performance and efciency it is recommended that the correct nozzles
are used for the main cleaning operations. These nozzles are indicated in the diagrams
by the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard oor.
A nozzle type HF is suitable for use only on hard oor.
A nozzle of type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
All accessories can be tted to the end of the hose handle or to the end of the xed tube
(except for dusting brush).
The Crevice Tool and Furniture nozzle are stored on the tube, while the Dusting brush is
stored underneath the hose handle.
• Crevice Tool * – For corners and hard to reach areas.
• Dusting Brush * – For bookshelves, frames, keyboards and other delicate areas.
• Furniture Nozzle * – For soft furnishings and fabrics.
• C&F Nozzle : For carpets and hard oors.
• Parquet Nozzle* – For parquet oors and other delicate oors.
• Pet Hair Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces.
IMPORTANT: Do not use mini turbo nozzle on rugs with long fringes, animal hides and
carpet pile deeper than 15mm. Do not keep the nozzle stationary while the brush is
rotating.