Hoover ONEPWR CLEANSLATE CORDLESS User manual

GETTING STARTED
TOUGH STAINS
USE SOLUTION ONLY
SOLUTION
WAT E R
QUICK START GUIDE
1
Charge battery until indicator is full. Insert into side of unit.
Audible click will be heard.
Remove Solution Tank from the unit.
2
ONEPWR®
CLEANSLATE™
CORDLESS
CARPET & UPHOLSTERY
SPOT CLEANER
4
Turn power on. Unit starts in
normal mode to provide
optimal runtime and
performance.
5
For tough stains, press "+" to
activate boost mode and
increase suction. *Battery
indicator will flash red when
battery is low.
3
Add water and portable formula to
solution tank. Reference fill lines on the
solution tank, and instructions on user
manual. Reinsert onto unit.
Fully charged

Apply downward
pressure on the front
of the cleaning tool
and pull towards you
to lift the stain. Repeat
as needed.
SUCTION
Remove any chunks or
large debris before
using machine. Use
preferred tool to
suction any excess
liquid from the stain.
FIRST
Place the tool on the
stain and scrub.
SCRUB
Spray a generous
amount of cleaning
formula over stain by
pressing the trigger
behind the tool.
SPRAY
HOW TO USE
TOOLS FOR EVERY MESS
7in WidePath Tool
Tackle stairs and larger messes
in fewer passes.
Tight Spot Tool
Clean crevices, corners,
baseboards and other tough to
reach areas.
Hose Rinse Tool
Flush the hose with water to
remove any left behind dirt &
debris after use.
961003576-R0
FOR BEST PERFORMANCE, CHOOSE HOOVER®
BUY SOLUTIONS TODAY