Hoover SmartWash Pet Complete User manual

QUICK START GUIDE
Remove Clean Water Tank, fill
with warm water & reinsert.
4
Quarter turn and
pull to remove cap
USE ONLY
RECOMMENDED
HOOVER®SOLUTIONS
Remove Solution Tank, fill & reinsert.
3
PRO TIPS
Allow Spot Chaser
™
solution to soak into
stains for 5 min before cleaning carpet.
For best results, use only
HOOVER®brand solutions.
Do not mix solutions with water
when filling Solution Tank.
USE RECOMMENDED
HOOVER®SOLUTIONS
Pinch tabs on Spot Chaser
™
Tank and pull downwards. Fill
with HOOVER
®
Oxy Spot Chaser
™
Wand Formula and push it
back into Handle.
3
Attach Clean Water Tank
& Handle.
Position Nozzle onto foot, making sure
to align the tabs at the top of the Nozzle
with the notches inside the foot. Slide
Nozzle forward to snap into position.
21
GETTING STARTED
®

PRO TIPS
For best performance:
Complete system care after each use.
See user manual for more info.
For best results:
Slowly operate unit on
forward and backward strokes.
To clean Filter:
Follow instructions labeled on
the back of Dirty Water Tank.
HOW TO USE: MAIN UNIT
PRO TIPS
Maintenance Tip:
Empty tanks after each use
and allow to air dry.
When Dirty Water Tank needs to be emptied,
there will be a change in operation sound:
To maintain proper suction, empty Dirty
Water Tank promptly.
Keep SmartWash
™
in the
upright position when removing
the Pretreat Wand.
Lift handle on Dirty Water Tank to
remove.
3
To clean carpets, slowly push forward to
wash and pull back to dry.
2
Use pedals to operate.
ReclineOn/Off
1
Reinsert Handle.
3
Solution
dispenses
from tip
Aim at stain and press button.
21
Press button to release.
HOW TO USE: SPOT CHASER
™
PRETREAT WAND
961003570-R0