Horizon Fireplaces VVX User manual

Gamma, Kings House, Kings Road West, Newbury, Berkshire RG14 5BY
0333 240 3000 0333 240 3001 [e-mail] www.gamma.co.uk
Registered in England Number 2998021; Registered Office: 5 Fleet Place, London, EC4M 7RD
VVX Monochrome Expansion Module
User guide

Contents
Contents ....................................................................................................................................2
Introduction................................................................................................................................3
Set up the Polycom Monochrome Expansion Module................................................................4
Understand VVX Expansion Module Features...........................................................................5
Customise Device Line Keys.....................................................................................................7

Gamma, Kings House, Kings Road West, Newbury, Berkshire RG14 5BY
0333 240 3000 0333 240 3001 [e-mail] www.gamma.co.uk
Registered in England Number 2998021; Registered Office: 5 Fleet Place, London, EC4M 7RD
Introduction
This user guide will help you to navigate and use your new VVX Expansion Module. It will give you an
overview of your device, and walk you through tasks so you can successfully use it to perform basic and
advanced functions.
VVX Monochrome Expansion Module

Gamma, Kings House, Kings Road West, Newbury, Berkshire RG14 5BY
0333 240 3000 0333 240 3001 [e-mail] www.gamma.co.uk
Registered in England Number 2998021; Registered Office: 5 Fleet Place, London, EC4M 7RD
Set up the Polycom Monochrome Expansion Module
The Polycom VVX Expansion Modules are powered and signalled by VVX business media phones and
require minimal setup. After you connect an expansion module to a VVX phone, the module is
automatically configured to work with the phone. Note that you cannot connect mono and colour display
expansion modules together on the same phone.
To connect the expansion module to your phone:
Connect an auxiliary cable from the AUX port on the phone to the AUX IN port on the expansion
module.
The LED lights on the module’s line keys flash red and green as the module starts up. The VVX
Mono Expansion Modules power up in approximately 3 seconds.

Gamma, Kings House, Kings Road West, Newbury, Berkshire RG14 5BY
0333 240 3000 0333 240 3001 [e-mail] www.gamma.co.uk
Registered in England Number 2998021; Registered Office: 5 Fleet Place, London, EC4M 7RD
Understand VVX Monochrome Expansion Module Features
The following figure illustrates the features, components, and keys available on the mono expansion
modules.

Gamma, Kings House, Kings Road West, Newbury, Berkshire RG14 5BY
0333 240 3000 0333 240 3001 [e-mail] www.gamma.co.uk
Registered in England Number 2998021; Registered Office: 5 Fleet Place, London, EC4M 7RD
The following are descriptions of the features, components, and keys available on the VVX Mono
Expansion Module.
Plastic Cover Overlying Directory Card: Protects the directory card. The directory card is a paper
sheet that displays
Line numbers
Busy lamp field
Contacts
Favourites
Line key functions
Plastic Cover Cut-Out: Helps insert or remove the plastic cover.
Line Keys: Selects available line key contacts, functions, and assignments.
LED Indicators Indicates a line or busy lamp field contact’s status. The following lists the LED
Indicator behaviours shown on the expansion modules:
Solid Green Indicates an active call in progress.
Fast-flashing Green Indicates an incoming call.
Flashing Green Indicates the remote party placed the call on hold.
Solid Red Indicates the phone of a monitored busy lamp field contact is placing a call or
is in a call.
Flashing Red Indicates a held call.
Base Stand: Hooks into the back of the expansion module to stand up the display

Gamma, Kings House, Kings Road West, Newbury, Berkshire RG14 5BY
0333 240 3000 0333 240 3001 [e-mail] www.gamma.co.uk
Registered in England Number 2998021; Registered Office: 5 Fleet Place, London, EC4M 7RD
Customise Device Line Keys
Assign a side car if not already done
Click the "Side Car" button
Click on a line key.
Select the option from the drop down*
Click the "Save" button to update the
configuration.
Click save on device screen to restart
the device in order to download the
latest configuration
*Please note on the VVX310, VVX500 & VVX600 the line keys can be set as BLF's only