Horizon Fitness Vectra Assembly instructions

CD/DVD PLAYER
(& STEREO RADIO ALARM
CLOCK)
Rear Bedroom or Exterior
Entertainment Center
–If Equipped
The TV operates from 120-volt AC
household current only, so you must
have either the shoreline connected, the
generator running, or the inverter turned
on (if equipped).
The DVD player is connected to the TV
and plays through the TV stereo
speakers.
Set TV Video Input
• Turn On both TV
and DVD player
• Press TV/VIDEO
or INPUT button
on the remote or
front of TV and
select “VIDEO 1”
input on TV.
TV screen will
display DVD
player logo when
correct input is selected.
Play DVD
• Insert DVD into player. DVD will
begin to ‘load’ automatically. TV
screen will typically show
“READING” or “LOADING.”
• The DVD may load directly
to the main title/menu screen
or it may begin to play
previews. You may be able to
skip previews if desired by
pressing the ‘NEXT’ button until you
see the main menu screen.
• When the
main menu
screen appears,
use the arrow
buttons on the
DVD remote to
select the
desiredentryor
press the
ENTER or PLAY buttons on the
remote (or ‘Play’ button on DVD
player) to begin playing the feature.
• Volume is adjusted with the DVD
remote (or volume buttons on DVD
player).

Audio-Video System
Basic Operation
Guide
Part No. 132001-20-007
0701060925 September 2006
Copyright 2006 Winnebago Industries, Inc.
All rights reserved.
NOTE: See your InfoCase for specific
operating guides for audio and
video components.
CD/DVD PLAYER
& STEREO RADIO ALARM CLOCK
Rear Bedroom or
Exterior Entertainment Center
–If Equipped