Horizon Hobby Carbon Cub FX-3 User manual

Carbon Cub FX-3
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di Istruzioni

3 EN
Carbon Cub FX-3
Part # Description
HAN528001 Fuselage
HAN528002 Wing, Left-Hand
HAN528003 Wing, Right-Hand
HAN528004 Light Covers
HAN528005 Fin and Rudder
HAN528006 Cowling
HAN528007 Hardware Set
HAN528008 Wooden Parts
HAN528009 Wing Struts
HAN528010 Pushrod Set
HAN528011 Side Windows
HAN528012 Windshield
HAN528013 Light Set
HAN528014 Tow Release
HAN528015 Tail Wheel
HAN528016 Wheels, 8.5 inches (261mm)
HAN528017 Fuel Tank
HAN528018 Wing Tube
HAN528019 Tail Tubes
HAN528020 Wing Bags
HAN528021 Decal Sheet
HAN528022 Strut Covers
HAN528023 Scale Parts
HAN528024 Fuel Caps
HAN528025 Tail Brace
HAN528026 Landing Gear Dampers
HAN528027 Landing Gear
HAN528028 Stabilizer and Elevator Set, Left and Right
REPLACEMENT PARTS
TABLE OF CONTENTS
Notice......................................................................................................................................................................2
Meaning of Special Language..................................................................................................................................2
Safety Warnings and Precautions.............................................................................................................................2
Safe Operating Recommendations...........................................................................................................................2
Before Starting Assembly.........................................................................................................................................2
FAA Information .......................................................................................................................................................2
Replacement Parts...................................................................................................................................................3
Required Adhesives .................................................................................................................................................3
Required for Completion ..........................................................................................................................................4
Optional Parts..........................................................................................................................................................4
Tools Required.........................................................................................................................................................4
Removing Wrinkles ..................................................................................................................................................5
Building Precautions................................................................................................................................................5
Transportation and Storage......................................................................................................................................5
Replacement Covering.............................................................................................................................................5
Checking Blind Nuts.................................................................................................................................................5
Balancing Your Model...............................................................................................................................................5
OPTIONAL SCALE ACCESSORIES..............................................................................................................................5
FOR THE VISUALLY CHALLENGED .............................................................................................................................5
Control Horn Installation...........................................................................................................................................5
Aileron and Flap Servo Installation ...........................................................................................................................6
Aileron Linkage Installation ......................................................................................................................................8
Flap Linkage Installation ..........................................................................................................................................8
Elevator Servo Installation........................................................................................................................................9
Hinging the Elevators.............................................................................................................................................10
Elevator and Stabilizer Installation..........................................................................................................................11
Fin Installation .......................................................................................................................................................12
Rudder Installation.................................................................................................................................................13
Rudder Servo Installation.......................................................................................................................................14
Tail Wheel Installation ............................................................................................................................................16
Tail Bracing Installation..........................................................................................................................................17
Receiver Installation...............................................................................................................................................18
Landing Gear Installation .......................................................................................................................................19
Engine Installation .................................................................................................................................................20
Fuel Tank Installation .............................................................................................................................................21
Interior Accessories ...............................................................................................................................................23
Tow Hook Installation.............................................................................................................................................24
Window Installation................................................................................................................................................24
Cowling Installation................................................................................................................................................25
Wing Lighting ........................................................................................................................................................27
Wing and Wing Strut Installation ............................................................................................................................27
Decal Installation ...................................................................................................................................................29
Center of Gravity....................................................................................................................................................29
Control Throws ......................................................................................................................................................30
Mixing ...................................................................................................................................................................30
Preflight Checklist..................................................................................................................................................30
Daily Flight Checks ................................................................................................................................................30
Limited Warranty ...................................................................................................................................................31
Warranty and Service Contact Information .............................................................................................................32
Instructions for Disposal of WEEE by Users in the European Union..........................................................................32
Academy of Model Aeronautics National Model Aircraft Safety Code.......................................................................32
REQUIRED ADHESIVES
Description
15-minute epoxy
30-minute epoxy
Canopy Glue
Thin CA
Medium CA
Threadlock, low and high strength

4EN
REQUIRED FOR COMPLETION
# Required Part # Description
1 DLEG0130 DLE-130cc Twin Gas Engine with EIectronic Ignition
1 DLEG0170 DLE-170cc Twin Gas Engine with EIectronic Ignition
1 EVOA112 Evolution 3 Wire Ignition/Receiver Switch
1 HAN116 Fuel Filler with "T" and Overflow Fittings
2 SPMA3003 Heavy-Duty Servo Extension 12-inch
2 SPMA3004 Heavy-Duty Servo Extension 18-inch
4 SPMA3005 Heavy-Duty Servo Extension 24-inch
2 SPMA3006 Heavy-Duty Servo Extension 36-inch
2 SPMA3007 Heavy-Duty Servo Extension 48-inch
1 SPMAR12310T AR12310T 12CH PowerSafe Telemetry RX
2 SPMEXEC324 24-Inch EC3 Extension with 16AWG
7 SPMSA6310 A6310 U-T/H-S Brushless HV Servo
1 SPMSA6380 A6380 H-T/H-S Digital HV Servo
6 SPMSP3101 Aluminum 1/2 Servo Arm, 1.5-inch
1 SPMSP3103 Aluminum Double Servo Arm, 2.5-inch
3 SPMX40002SRX 4000mAh 2S 7.4V Smart Receiver Battery; IC3
# Required Part # Description
1 EVOA100 Optical Ignition Kill Switch
1 SPMAS3000 AS3000 AS3X Stabilization Module
1 SPMX13003S30M 1300mAh 3S 11.1V Smart 30C LiPo; IC3
1 SPMXCA305 Connector: IC3 Device/Wire 4-inch
TOOLS REQUIRED
Description
Adjustable wrench
Balancing stand
Box Wrench Set
Clamps
Crimping tool
Drill and tap set, metric
Drill bit set, Imperial or Metric
Epoxy brushes
Felt-tipped pen
Hemostats
Hex wrench set, Imperial and Metric
Hobby knife with #11 blade
Hobby scissors
Hook and loop straps
Hook and loop tape
Isopropyl alcohol
Light machine oil
Low-tack tape
Mixing sticks
Needle nose pliers
Nut driver set, Imperial and Metric
Paper towels
Pencil
Petroleum jelly
Phillips screwdriver: #1, #2
Pin vise
Rotary tool
Ruler
Sanding bar
Sanding drum for rotary tool
Sandpaper
Scissors
Side cutters
Square
Tap handle
Tapered reamer
Tie wraps
Toothpicks
Wire stripper
OPTIONAL PARTS

66FR
REQUIS POUR LA FINITION
Nombre
requis
Référence Description
1 DLEG0130 Deux moteurs à essence DLE-130cm3avec allumage électronique
1 DLEG0170 Deux moteurs à essence DLE-170cm3avec allumage électronique
1 EVOA112 Interrupteur Evolution 3 fils Allumage/RX
1 HAN116 Point de remplissage de carburant avec coupleur en T
2 SPMA3003 Rallonge de servo, 300 mm
2 SPMA3004 Rallonge de servo, 450 mm
4 SPMA3005 Rallonge de servo, 610 mm
2 SPMA3006 Rallonge de servo, 915 mm
2 SPMA3007 Rallonge de servo, 1220 mm
1 SPMAR12310T Récepteur PowerSafe avec télémétrie AR12310T 12 canaux
2 SPMEXEC324 Rallonge EC3™ 60 cm, section 1.5mm²
7 SPMSA6310 Servo A6310 U-T/H-S sans balai HV
1 SPMSA6380 Servo A6380 H-T/H-S numérique HV
6 SPMSP3101 Bras de servo 1/2 en aluminium, 38mm (1,5po)
1 SPMSP3103 Bras de servo double en aluminium, 63,5mm (2,5po)
3 SPMX40002SRX Batterie de récepteur Smart 7,4V 2S 4000mAh; IC3
Nombre
requis
Référence Description
1 EVOA100 Coupe-circuit optique d’allumage
1 SPMAS3000 Module de stabilisation AS3000 AS3X
1 SPMX13003S30M LiPo 30C Smart 11,1V 3S 1300mAh; IC3
1 SPMXCA305 Connecteur: dispositif IC3/fil 102mm (4po)
OUTILS NÉCESSAIRES
Description
Clé ajustable
Support d’équilibrage
Ensemble de clés polygonales, métriques
Serre joint
Pince à sertir
Ensemble de clés à six pans, métrique
Ensemble de mèches, impériales ou métriques
Pinceau Epoxy
Feutre fin effaçable
Pince Hemostat
Ensemble de clés à six pans, impériales ou métriques
Couteau : Lame numéro 11
Ciseaux
Bande auto aggripante
Bandes auto aggripante
Alcool isopropylique
Lubrifiant
Adhésif de masquage
Récipients pour mélanger et bâtons
Pince fine
Ensemble de tournevis à écrou, impérial ou métrique
Papier absorbant
Crayon à papier
Gelée de pétrole
Tournevis cruciforme: #1, #2
Porte forets
Multiutensilie
Réglet
Cale à poncer
Poncette rotative
Papier de verre
Ciseaux
Pince coupante
Équerre
Tourne-à-gauche
Alésoir conique
Colliers
Cure dents
Pince à dénuder
PIÈCES FACULTATIVES

© 2020 Horizon Hobby, LLC.
Hangar 9, UltraCote, Evolution, AS3X and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC.
The Spektrum trademark is used with permission of Bachmann Industries, Inc.
Cub Crafters, Carbon Cub, associated emblems and logos, and body designs of vehicles are either registered trademarks or
trademarks of Cub Crafters, Inc. and are used with permission.
All other trademarks, service marks and logos are the property of their respective owners.
Created 01/2020 59597 HAN5280