HornetTek SLIPPER U3 User manual

SLIPPER
USB3.0 USER MANUAL
ncludes
Hard Drive Installation Guide
Hard Drive Formatting Guide
PCClone EX Installation Guide
Note:
In order not to damage HDD, it is strongly recommended that HDD swapping is practiced when main
power is off
PCClone one-touch-backup Software only works with Windows OS

E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e
1
Hard Drive Installation Guide
Note: Please follow the instructions to make sure your Hard Drive is
successfully installed to the HDD station.
STEP1: Push the Hard Drive toward the SATA connector and make
sure the SATA connector is properly connected.
Mounting 2.5”HDD with partition block
HDD SATA
connector
HDD station
connector

E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e
2
STEP2: Connect the power supply and USB port.

E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e
3
STEP3: Push the switch to turn on the power
Remove the Hard Drive by pulling the ejection jack
Note: Power off before installing or removing the Hard Drive

E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e
4
Hard Drive Formatting Guide
☆You may format your Hard Drive by using the USB 3.0 connection.
☆Make sure your HDD station is turned on and connected to the PC before
formatting the Hard Drive.
STEP1: Right-click on “My Computer” and select “Manage”.
STEP2: Select “Disk Management” and you will see your Hard Drive shown
as “Unallocated” (Disk number may vary)

E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e
5
STEP3: Right-click on the “Unallocated” box and select “New Partition”.
(Disk number may vary)
STEP4: The “New Partition Wizard” will appear. Please follow the "New
Partition Wizard" step by step instructions to complete the Hard Drive
formatting procedure.

E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e
6
STEP5: Once the Hard Drive formatting procedure is completed, the Hard
Drive will be recognized as a “New Volume” (New Volume drive letter may
vary i.e. “New Volume (Z:)” )
STEP6: Double-click “My Computer”. You will see “New Volume” appear on
your PC (Drive letter may vary i.e. “New Volume (Z:)”)

E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e
7
PCClone EX Installation Guide
STEP1: Insert the CD-ROM into the CD-ROM reader
STEP2: Follow the instruction on the pop-up windows for installing the
software. The software will automatically complete install
STEP3: User manual will be reached at the top-right of the software window