Dok CR09 User manual

CR09

 Alarm Clock/FM Radio/
Universal Cradle & Charger
Dual Charger
universal dual charger with
cradle and alarm clock
User’s Guide

Features
01
Contents
Thank you for purchasing our product. For operation and security, read this
manual carefully and keep it handy for future reference.
Contents...................................................................................................................................01
Features....................................................................................................................................01
Warnings and Precautions.....................................................................................................02
Important Safety Instructions................................................................................................03
What’s in the Gift box..............................................................................................................04
........................................................................................................05-07
Use the unit..........................................................................................................................08-12
Troubleshooting.....................................................................................................................13
Location of Functions
•
• Compatible Cradle for ALL Smart Phones and Tablets
- Horizontal or Vertical
• Smart "SCD" Technology Recognizes and Charges ANY
Smart Device
• Play Your Own Music from ANY Device through AUX IN Jack
• Clock with Alarm
• FM Radio
Dual USB Charger-Charge and/ or View Simultaneously

02
MOISTURE AND CONDENSATION
SAFETY
When connecting or disconnecting the AC
cord, grip the plug and not the cord itself.
Pulling the cord may damage it and create a
hazard. When you are not going to use the unit
for a long period of time, disconnect the AC cord.
WHEN IN USE
Do not use this unit in extremely hot, cold,
dusty, or humid conditions.
Do not restrict the air flow of the unit by
placing it on carpet or covering.
WARNING: To reduce the risk of fire
or electric shock, do not expose this
apparatus to rain or moisture.
CAUTION: Use of controls or
adjustments or performance of
procedures other than those
specified may result in hazardous
radiation exposure.
If unit is exposed to moisture and extreme
cold temperatures, then moved to a warm
environment, condensation may form on
internal components. Under these
circumstances, powering the unit on may
cause damage to the unit or cause harm to
the user. Allow the unit to stand in a warm
environment for 1 to 3 hours and allow the
unit to air dry safely.
Battery shall not be exposed to excessive
heat such as sunshine, fire or the like. (for
once batteries could be used to operate
apparatus and/or with battery operated
remote control)
Location of label on the apparatus if that
label was affixed under a lid or on the
bottom of the apparatus with a mass not
exceeding 7kg.
Warning:Changes or modificationgs to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
NOTE:This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However,there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which thereceiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC Warnings

03

What’s in the Gift box?
1 Cradle Insert (For flat phones
like SAMSUNG GALAXY II)
CR07 Base Unit AC/DC Adaptor
04
Speaker (AUX in) Cable Warranty Card Uer’s Guide
CR09

 Alarm C lock/ FM Radi o/
Unive rsal Cr adle & Ch arger
Dual Ch arger
unive rsal dua l charge r with
cradle a nd alar m clock
User’s Guide
“MICRO” Phone/
Tablet Charging Cable

Location of Functions
05
1
Alarm 1 Buzzer/ Radio Indicator
Lights when the
to buzzer or radio.
alarm 1 is on and set
PM Indicator
Lights when the time is in the PM.
1.
LED Display
2
2.
34
3.
Alarm 2 Buzzer/ Radio Indicator
Lights when the
to buzzer or radio.
alarm 2 is on and set
4.

06
Location of Functions
SNOOZE/SLEEP
VOL+/AL1
VOL-/AL2
POWER SOURCE
AUX IN
DIMMER
TIME- TIME+
CLOCK/PRESET
5
6
7
8
6. Volume+/AL1
P
Press and hold to begin setting Alarm 1.
ress to increase the volume.
TUNER- TUNER+
P
Radio modes.
ress repeatedly to switch between Line in, FM
7. Power ON/OFF
8. Volume-/AL2
P
Press and hold to begin setting Alarm 2.
ress to decrease the volume.
5.
9. Snooze/Sleep
P
mode,Press repeatedly to set the sleep timer.
ress to snooze the alarm after it sounds.In RADIO
9

07
Location of Functions
10. TUNER-/TIME-
P
Press to decrease the minute or hour when setting the
clock or alarm.
ress to tune the radio.
11. Dimmer
P ress to dim the display.
12. TUNER+/TIME+
P
Press to increase the minute or hour when setting the
clock or alarm.
ress to tune the radio.
CLOCK/PRESET
13.
In OFF mode, press and hold to begin setting the time.
Press to preset stations.
SNOOZE/SLEEP
VOL+/AL1
VOL-/AL2
POWER SOURCE
AUX IN
DIMMER
TIME- TIME+
CLOCK/PRESET
10
11
12
13
TUNER- TUNER+

08
Use the unit
Power
Plug the included AC/DC power adapter
(100-240V ~50/60Hz 3A max) into the
DC POWER INPUT on the dock and an
AC power outlet to power the dock.
SNOOZE/SLEEP
VOL+/AL1
VOL-/AL2
POWER SOURCE
DIMMER
TUN-/
TIME-
TUN+/
TIME+
PRESET/CLK
Line Input
SNOOZE/SLEEP
VOL+/AL1
VOL-/AL2
POWER SOURCE
DIMMER
TUN-/
TIME-
TUN+/
TIME+
PRESET/CLK
The battery backup is intended
for short power outages only
The clock radio's primary
functions cannot run off of the
battery backup alone.Requires
2 AAA-size, batteries (not included)
.
Battery Back up
1. iPhone/iPad or other phones stand.
Put them on your desk, table etc.
When placing a tablet or
large device in the
cradle, pull out the
extendable board for
stability and preventing
the unit from falling over.
How to Charge Your Devices

Use the unit
3. Charging your iPhone/ ipad or other personal devices:
This unit provides USB ports for charging up to 2 device
(Output power 5V 2.1A for tablet, phone & accessories and 5V 1A for
phone & accessories).
Make sure the adaptor is connected to an active power,Connect your
USB cable to your device then to the unit's appropriate USB port.
09
2. Your 's shape will determine if an insert is needed.
Use the insert for flat-bottom phones. Round-bottom phones do
not need the insert;
smart device
B
Optional Insert
AFor FLAT-BOTTOM phones
For ROUND-BOTTOM phones

Use the unit
10
Clock and Sleep Timer
Setting the Clock
1. If in standby mode,press and hold the CLOCK/PRESET to
adjust mode.
2. When the display begins to blink,then release the button.
3. Press the TUNER-/TIME-&TUNER+/TIME+ button to adjust
the hour.
The PM indicator will light up when the hour is set in the PM.
4. Press the CLOCK/PRESET button to adjust the hour.(do the
same to adjust minute).
5. Press the CLOCK/PRESET button to finish setting the time.
Setting the Sleep Timer
1. Press the Snooze/Sleep button repeatedly to set the sleep
timer(90,80,70,60,50,40,30,20,10 min or OFF).
2. Once the set sleep time has expired the clock radio will
automatically power off.
Listen to the Radio
Tuning the FM Radio
1. Press POWER button to turn the clock radio on.
2. Press the TUNER+ and TUNER- buttons to adjust the radio to
the desired frequency.
3. Press and hold TUNER+ and TUNER- buttons to search for the
next available frequency.
4. Press the VOL+/VOL- buttons to adjust the volume.
Saving a Station as a Preset
1. Follow the instructions for Tuning Radio.
2. Tune to the desired station.
3. Press and hold the CLOCK/PRESET button until P01 blinks,
Press CLOCK/PRESET again to lock the current station to the
P01;
4. Repeat 2 and 3 to save more stations in preset P02, P03, P04
…up to P020.

11
Tuning to a Preset Radio Station
1. In the Radio mode, press CLOCK/PRESET to the preset mode;
2. Press TUNER-/TIME- and TUNER+/TIME+ to cycle through
radio stations.
line Input
Using the Line Input
Requires a 3.5mm audio cable (Included)
1. Connect a 3.5mm audio cable to the Line Input and the audio
output on an Mp3 player or other audio device.
2. Press the Source to switch to line in mode.
The display will show “AUX”.
3. Use the native controls on the connected Mp3 player or other
audio source to play your audio through the unit.
When not in use, make sure to disconnect the 3.5mm audio
cable(included).
Alarm
Setting the Alarm
1. In the standby mode;
2. Press and hold VOL+/AL1 until the time is flashing;
3. Press TUNER-/TIME- and TUNER+/TIME+ to adjust the hour,
Press VOL+/AL1 to move to adjust the minute, Press VOL+/AL1
to finish alarm time setting;
4. When the indicator light is come on, press TUNER-/TIME- and
TUNER+/TIME+ to select the Alarm type(between Buzzer and
Radio);
5. Press VOL+/AL1 to the Alarm volume mode;
6. Press TUNER-/TIME- and TUNER+/TIME+ to adjust the volume
level;
(Alarm1 and Alarm2 are setting the same way)
Use the unit

1. Alarms are automatically armed when set. Active alarms
are indicated by alarm types on the display;
2. To review the alarm time, press and release the ALARM
button on ce. The related wake to source and alarm time
will show on the display;
3. Double click the related Alarm button to toggle it ON or OFF,
if the alarm is armed, the alarm type will light up.
Reviewing, Arming and Disarming Alarm
Stop the Alarm
When the alarm is sounding, press the related Alarm button
or the power button to stop it and reset it to next day.
Default snooze time is 9 minutes. Press and release the
SNOOZE/SLEEP after an alarm sounds. The alarm will be
silenced for the snooze time then sound again. Snooze can
be pressed several times.
Snooze Operation
12
Use the unit

Troubleshooting
13
Volume level is set too high Decrease the volume
Sound is
distorted
Plug in USB to
smart device and
does not charge
Charging cable is bad Change charging cable

Printed in china