Hotron HR50 User manual

Motion Sensor(HR50)
Instruction Manual
1
Technical specifications
2
General Information
M
icrowave
This product is a highly sensitive, high performance product that serves to control similar devices for the opening and closing of
automatic doors by detecting the movement of humans or object. For the safe and accurate use of the product, please read this
instruction manual until the end.
Hotron Ltd. 26 Dublin Street, Carlow, Ireland Tel: [phone] Fax: [phone] www.hotron.com
Power supply: AC/DC 12~30V Current consumption: 150mA(DC12V , +25
℃
)
Microwave module: 24.125GHz Contact capacity: 0.5A/125VAC, 1A/24VDC
Hold time: 1.2 ~ 20 Sec. (Standard: 1.2Sec.) Max Install height : 3.0M
Detecting feild: 4*3 (W*D) (Height 2.2M ) Operating Tem/Humi: -20
℃
~+60
℃
/0~90% (Non condensing)
<Accessories>
Mounting
Template
Cable
Screw
Instructions
Sensing
Module
Case
Cable Hole
Connector
Screw Hole
LED
Hold time
volume
Sensitivity
volume
NO NC
< Default value : NO >

3
Installation Guide
Caution
Do not supply the power during engineering work of installation.
Do not disassemble or modify the device, it may cause fire or electric shock
4
Sensitivity Adjustment
5
Sensing Feild
6
Detection Field
7
Wiring diagram
8
Mounting Information
Hotron Ltd. 26 Dublin Street, Carlow, Ireland Tel: [phone] Fax: [phone] www.hotron.com
1Apply mounting
template to
transom and
make holes.
2Fix the case to
the wall
3Connect power
line to sensor
main body
4Tilt angle up or
down to change
sensing field.
Changing position
of pattern
2 power lines & 2 relay contact lines.
AC/DC12~30V
Output
(Mounting Height : 2.2m)
2 1 0 1
2(Unit:m)
0
1
2
Gray
Gray
Yellow
Yellow
Sensitivity is adjustable by setting volume on the
main body
Max.Min.
Avoid moving objects
close to the sensor
Avoid heavy rain and snow Avoid vibration Avoid fluorescent
light sources