HP NC370F User manual

HP NC370F PCI-X Multifunction Gigabit
Server Adapter User Guide
June 2007 (Third Edition)
Part Number 389196-00C

© Copyright 2004, 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and
services are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors
or omissions contained herein.
Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft Corporation. Intel, Pentium,
and Itanium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States
and other countries. UNIX is a registered trademark of The Open Group. Linux is a U.S. registered trademark of
Linus Torvalds.
HP NC370F PCI-X Multifunction Gigabit Server Adapter
June 2007 (Third Edition)
Part Number 389196-00C

HP NC370F PCI-X Multifunction Gigabit Server Adapter iii
Contents
About this guide
Technician notes............................................................................................................................................v
Where to go for additional help....................................................................................................................vi
Telephone numbers................................................................................................................................vi
Chapter 1
Introduction
Overview ................................................................................................................................................... 1-1
LED indicator............................................................................................................................................ 1-2
Chapter 2
Installing the adapter
Overview ................................................................................................................................................... 2-1
Electrostatic discharge precautions ........................................................................................................... 2-1
Installing the adapter in a server................................................................................................................ 2-2
Connecting the network cable ................................................................................................................... 2-2
Appendix A
Regulatory compliance notices
Regulatory model number........................................................................................................................ A-1
European Union regulatory notice............................................................................................................ A-1
Korean notice ........................................................................................................................................... A-2
Class B equipment ............................................................................................................................. A-2
BSMI notice ............................................................................................................................................. A-2
Laser compliance...................................................................................................................................... A-2
Appendix B
Electrostatic discharge
Overview ...................................................................................................................................................B-1
Grounding methods ...................................................................................................................................B-1
Appendix C
Specifications
HP NC370F PCI-X Multifunction Gigabit Server Adapter specifications ...............................................C-1

HP NC370F PCI-X Multifunction Gigabit Server Adapter v
About this guide
Use this guide for reference when installing the HP NC370F PCI-X Multifunction Gigabit
Server Adapter.
WARNING: To reduce the risk of personal injury from electric shock and hazardous
energy levels, only authorized service technicians should attempt to repair this
equipment. Improper repairs can create conditions that are hazardous.
Technician notes
WARNING: Only authorized technicians trained by HP should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module-level repair. Because of the complexity of the individual boards
and subassemblies, no one should attempt to make repairs at the component level or
to make modifications to any printed wiring board. Improper repairs can create a safety
hazard.
WARNING: To reduce the risk of personal injury from electric shock and hazardous
energy levels, do not exceed the level of repairs specified in these procedures.
Because of the complexity of the individual boards and subassemblies, do not attempt
to make repairs at the component level or to make modifications to any printed wiring
board. Improper repairs can create conditions that are hazardous.
CAUTION: To properly ventilate the system, you must provide at least 7.6 cm (3.0 in.) of
clearance at the front and back of the server.
CAUTION: The computer is designed to be electrically grounded (earthed). To ensure proper
operation, plug the AC power cord into a properly grounded AC outlet only.
NOTE: Any indications of component replacement or printed wiring board modifications may void any
warranty.

About This Guide
vi HP NC370F PCI-X Multifunction Gigabit Server Adapter
Where to go for additional help
HP updates networking software frequently to include new functionality and features.
Complete the following steps to get the latest drivers, firmware, and documentation.
1. Go to the HP website (http://www.hp.com).
2. Click Support and Troubleshooting Information from the left menu bar.
3. Type the product name in the for product box and press Enter. For example, type
NC370T.
4. Download the drivers, firmware, or documentation as needed.
HP contact information
For the name of the nearest HP authorized reseller:
•In the United States, refer to the HP US service locator webpage
(http://www.hp.com/service_locator).
•In other locations, refer to the HP website (http://www.hp.com).
For HP technical support:
•In North America:
•Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days
a week. For continuous quality improvement, calls may be recorded or monitored.
•If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more
information about Care Packs, refer to the HP website (http://www.hp.com).
•Outside North America, call the nearest HP Technical Support Phone Center. For telephone
numbers for worldwide Technical Support Centers, refer to the HP website
(http://www.hp.com).

HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide 1-1
1
Introduction
Overview
The HP NC370F PCI-X Multifunction Gigabit Server Adapter is a high-performance, stand-
alone Ethernet adapter with a controller chip that delivers 1000 Mb/s Ethernet over fiber
cabling. For best performance, install the adapter in a 64-bit/133MHz, PCI-X slot. The
adapter provides failover capabilities with other Gigabit and 10/100 adapters installed in the
workstation or server.
The HP NC370F PCI-X Multifunction Gigabit Server Adapter supports current standards for
IEEE 802.3z 1000 Base-SX and PCI specifications (PCI bus specification 2z and PCI-X
specification 1.0a). Manageability support is provided by ASF 1.0 using systems with SM
Bus 2.0 interfaces.
The HP NC370F PCI-X Multifunction Gigabit Server Adapter is a supported option for
selected HP ProLiant servers. In addition to features that have shipped with other server
adapters, the NC370F adapter also supports Receive Side Scaling, TCP/IP Offload Engine
(TOE), iSCSI, and Remote Direct Memory Access (RDMA). For details about each of these
advanced features and for other information regarding the latest functionality, features, and
operating system support for this server adapter, refer to the networking page at
(http://h18004.www1.hp.com/products/servers/networking/index-nic.html).

Introduction
1-2 HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide
LED indicator
The adapter has a single fiber LC port and LED indicator for activity/link.
Figure 1-1: NC370F PCI-X Multifunction Gigabit Server Adapter
The HP NC370F PCI-X Multifunction Gigabit Server Adapter LED indicator operates as
described in the following table.
Table 1-1: LED operation for the HP NC370F PCI-X Multifunction Gigabit Server
Adapter
LED Status Description
Off No link to the adapter is established. The adapter is not
receiving power or the cable connection is not established.
On When green, link to the adapter is established. The adapter is
receiving power and the cable connection is secure.
LNK/ACT
Flashing The adapter is receiving direct packets or broadcast packets for
this specific adapter. When sending packets, the LNK/ACT light
is also flashing due to network acknowledgements received.

HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide
2-1
2
Installing the adapter
Overview
This chapter describes installation precautions, how to install the adapter, and how to attach
the fiber network cable.
WARNING: To avoid the risk of personal injury or damage to the equipment, consult
the safety information and user documentation provided with the equipment before
attempting installation of the adapter.
Many servers are capable of producing energy levels that are considered hazardous.
Users should not remove enclosures, nor should they bypass the interlocks provided
for removal of these hazardous conditions.
Installation of this adapter should be performed by individuals who are both qualified in
the servicing of computer equipment, and trained in the hazards associated with
products capable of producing hazardous energy levels.
This server adapter is intended for use with UL Listed ITE equipment having
instructions on adding and removing components such as PCI and PCI-X devices.
NOTE: Before removing the cover of the server, refer to the HP documentation for the proper methods
for installing a PCI card and avoiding electric shock hazards.
Electrostatic discharge precautions
A discharge of static electricity from a finger or other conductor can damage components on
the adapter. This can make the adapter inoperable. In addition to the following information,
refer to Appendix B for more precautions.
To prevent electrostatic damage, observe the following precautions:
•Always properly ground yourself when touching a static-sensitive component or
assembly.
•Avoid hand contact by transporting and storing parts in static-safe containers.
•Keep electrostatic-sensitive parts in their containers until they arrive at static-free
locations.
•Place containers on a grounded surface before removing the contents.
•Avoid touching pins, leads, or circuitry.

Installing the adapter
2-2 HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide
Installing the adapter in a server
Refer to the HP ProLiant server documentation for additional information on how to safely
install a PCI card in the server.
WARNING: If the server is not PCI Hot Plug compliant, power it down and unplug the
power cord from the power outlet before removing the server cover. Failure to do so
may damage the adapter or server.
1. Remove the power cord and server cover. Then remove the expansion slot cover from a
PCI/PCI-X slot.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
system components to cool before touching them.
2. Firmly seat the adapter in the PCI/PCI-X slot and secure the expansion slot cover.
Figure 2-1: Installing the adapter in a server
3. Replace the server cover and plug in the power cord.
Connecting the network cable
The HP NC370F PCI-X Multifunction Gigabit Server Adapter uses an LC fiber port. This
port supports multimode fiber with a maximum cable length dependent on the fiber type,
mode, and cable size. Refer to Appendix C for the maximum cable length.
To insert the LC connector into the adapter port, line up the slot on the fiber connector with
the adapter and gently push until the retainers click into place.

HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide A-1
A
Regulatory compliance notices
Regulatory model number
For the purpose of regulatory compliance certifications and identification, this product has
been assigned a unique regulatory model number. The regulatory model number can be found
on the product nameplate label, along with all required approval markings and information.
When requesting compliance information for this product, always refer to this regulatory
model number. The regulatory model number is not the marketing name or model number of
the product.
European Union regulatory notice
This product complies with the following EU Directives:
•Low Voltage Directive 73/23/EEC
•EMC Directive 89/336/EEC
Compliance with these directives implies conformity to applicable harmonized European
standards (European Norms) which are listed on the EU Declaration of Conformity issued by
Hewlett-Packard for this product or product family.
This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products
and EU harmonized Telecom products (e.g.
Bluetooth).
xxxx*
This marking is valid for EU non-harmonized Telecom products .
*Notified body number (used only if applicable - refer to the product
label)

Regulatory compliance notice
A-2 HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide
Korean notice
Class B equipment
BSMI notice
Laser compliance
This product may be provided with an optical storage device (that is, CD or DVD drive)
and/or fiber optic transceiver. Each of these devices contains a laser that is classified as a
Class 1 Laser Product in accordance with US FDA regulations and the IEC 60825-1. The
product does not emit hazardous laser radiation.
WARNING: Use of controls or adjustments or performance of procedures other
than those specified herein or in the laser product’s installation guide may result
in hazardous radiation exposure. To reduce the risk of exposure to hazardous
radiation:
•Do not try to open the module enclosure. There are no user-serviceable
components inside.
•Do not operate controls, make adjustments, or perform procedures to the
laser device other than those specified herein.
•Allow only HP Authorized Service technicians to repair the unit.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.

HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide B-1
B
Electrostatic discharge
Overview
To prevent damage to the system, be aware of the precautions you need to follow when
setting up the system or handling parts. A discharge of static electricity from a finger or other
conductor may damage system boards or other static-sensitive devices. This type of damage
may reduce the life expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
•Avoid hand contact by transporting and storing products in static-safe containers.
•Keep electrostatic-sensitive parts in their containers until they arrive at static-free
workstations.
•Place containers on a grounded surface before removing the contents.
•Avoid touching pins, leads, or circuitry.
•Always be properly grounded when touching a static-sensitive component or assembly.
Grounding methods
There are several methods for grounding. Use one or more of the following methods when
handling or installing electrostatic-sensitive parts:
•Use a wrist strap connected by a ground cord to a grounded workstation or computer
chassis. Wrist straps are flexible straps with a minimum of 1 megohm ±10 percent
resistance in the ground cords. To provide proper ground, wear the strap snug against the
skin.
•Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on
both feet when standing on conductive floors or dissipating floor mats.
•Use conductive field service tools.
•Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an HP
authorized reseller install the part.
NOTE: For more information on static electricity or assistance with product installation, contact your HP
authorized reseller.

HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide C-1
C
Specifications
HP NC370F PCI-X Multifunction Gigabit Server Adapter
specifications
Table C-1: NC370F PCI-X Multifunction Gigabit Server Adapter specifications
Specification Description
Network Controller Chipset Broadcom 5706
Bus Type PCI-X or PCI
Bus Width 32 or 64 bits
Bus Speed (MHz) 33, 66, 100, or 133 MHz
Data Transfer Method Bus Master DMA
Power Requirement Operating Voltage: +3.3 V +/- 5%
Power Consumption: 4 Watts
Maximum: 1.2 A @ 3.3 VDC
Data Transmission Rate 1000 Mb/s (Full-duplex)
Standards Supported IEEE 802.3z, 802.3x, 802.1p, 802.1Q, 802.3ad (static and dynamic
configuration modes)
Dimensions 16.8 cm x 7.1 cm (without bracket) (6.6 x 2.8 inches (L x W))
Connectors One LC low profile
Cable Distances Multimode:
Size: 62.5/125 µm Maximum Distance: 220 meters (656 ft)
Size: 50/125 µm Maximum Distance: 550 meters (1805 ft)
Interrupts Supported Automatically configured
Temperature Range Operating: 0°C to 55°C (32°F to 131°F)
Storage: -40°C to 85°C (-40°F to 185°F)
Relative Humidity
(non-condensing)
Operating: 10% to 90%
Storage: 5% to 95%