HP FlexFabric 10Gb 2-port 533FLR-T User instructions

Are you looking to reduce network congestion and improve cable management at the servers in your HP ProLiant Gen8 environment?
The HP FlexFabric 10Gb 2-port 533FLR-T Adapter is a dual-port 10GBASE-T adapter, featuring the BCM57810S 10 Gb Ethernet solution
from Broadcom in a PCIe 2.0 compliant form factor designed for HP ProLiant Gen8 rack servers. The HP 530FLR-T Adapter delivers full
line-rate performance across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances up to 100 meters.
Providing high performance Ethernet connectivity, it is ideal for virtual server and cloud computing environments. It supports
enterprise class features (VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo
frames, PXE boot) and virtualization features (VMware NetQueue and Microsoft VMQ).
The adapter's support for HP Sea of Sensors 3D Technology enhances server performance by reducing energy consumption and
expense.
Models
HP FlexFabric 10Gb 2-port 533FLR-T Adapter 700759-B21
HP FlexFabric 10Gb 2-port 533FLR-T FIO Adapter 700760-B21
Kit Contents HP FlexFabric 10Gb 2-port 533 FLR-T Adapter
Quick install card
Product warranty statement
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Overview
DA - 14616 North America — Version 2 — May 9, 2014 Page 1

Servers ProLiant DL (rack-optimized) :
HP ProLiant DL160 Gen8
HP ProLiant DL360p Gen8
HP ProLiant DL380p Gen8
HP ProLiant DL385p Gen8
HP ProLiant DL560 Gen8
ProLiant SL (scalable line) :
HP ProLiant SL230s Gen8
HP ProLiant SL250s Gen8
HP ProLiant SL270s Gen8
NOTE: This is a list of supported servers. Some may be discontinued.
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Compatibility
DA - 14616 North America — Version 2 — May 9, 2014 Page 2

Product Features Industry-leading throughput and latency performance
FlexibleLOM adapter
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Superior small packet performance
SR-IOV
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)
Network Partitioning
Dual-port 10 Gigabit
Ethernet Throughput
The HP 533FLR-T adapter delivers 20 Gbps full duplex Ethernet transfer rate per port , providing the
network performance needed to improve response times and alleviate bottlenecks that impact
performance of next generation data centers. 10Gb Ethernet bandwidth is ideal for high performance
computing, database clusters, and more.
Jumbo Frames The HP 533 FLR-T adapter supports jumbo frames (also known as extended frames), permitting up to a 9K
byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over 5X the size of a standard
1500-byte Ethernet frame. With jumbo frames, networks can achieve higher throughput performance and
improve CPU utilization. These attributes are particularly useful for database transfer and tape backup
operations.
TCP/IP Stateless
Offloading
TCP, IP, UDP checksum offload, Large Send Offload (LSO), TCP Segmentation Offload (TSO). These features
optimize host efficiency, leaving the CPU available for other duties.
The HP 533 FLR-T Adapter by Broadcom offers TCP/IP stateless offloading capability.
MSI and MSI-X Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load
balancing interrupts between CPUs/cores. The HP 533 FLR-T Adapter by Broadcom supports MSI and MSI-
X.
802.1Q VLANs IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the HP 533 FLR-T
adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security
and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic
to within the same VLAN domain also improves performance. The HP 530T Adapter by Broadcom provides
support for 802.1Q (VLAN).
TOE TCP/IP Offload Engine (TOE) shifts the processing of data in the TCP protocol stack from the server CPU to
the adapter's processor, freeing server CPU cycles for other operations.
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Standard Features
DA - 14616 North America — Version 2 — May 9, 2014 Page 3

Optimized for
Virtualization
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands
of consolidated virtual workloads.
Compliant with Single-Root I/O Virtualization (SR-IOV), accommodating multiple Virtual Machines (VMs) to
share single PCIe resources.
The HP 530T Adapter by Broadcom is SR-IOV ready, requiring firmware, software and OS support.
Checksum &
Segmentation Offload
Normally the TCP Checksum is computed by the protocol stack. By selecting one of the "Checksum
Offload" parameters, the checksum can be computed by the adapter.
Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network
connections by reducing CPU overhead. The technique is also called TCP segmentation offload (TSO) when
applied to TCP, or generic segmentation offload (GSO).
The HP 533 FLR-T Adapter by Broadcom has Checksum and Segmentation Offload capabilities.
IPv6 IPv6 uses 128-bit addressing allowing for more devices and users on the Internet. IPv4 supported 32-bit
addressing. The HP 533 FLR-T Adapter by Broadcom supports IPv6.
Receive Side Scaling (RSS) RSS resolves the single-processor bottleneck by allowing the receive side network load from a network
adapter to be shared across multiple processors. RSS enables packet receive-processing to scale with the
number of available processors.
The HP 533 FLR-T Adapter by Broadcom has RSS capabilities.
Time synchronization
implementations (PTP)
Synchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond
range, making it suitable for measurement and control systems.
The HP 533 FLR-T Adapter by Broadcom supports Precision Time Protocol-ready (PTP).
Network Adapter Teaming The HP 533 FLR-T adapter support for NIC teaming helps IT administrators increase network fault
tolerance and increased network bandwidth, The team of adapters can work together as a single virtual
adapter. The HP 530T provides support for several different types of teaming enabling IT administrators to
optimize availability, improve performance and help reduce costs.
Network Partitioning The HP 533FLR-T supports NIC partitioning for ProLiant Gen8 rack servers. Allowing administrators to
configure a 10Gb port as four separate partitions or physical functions. Each PCI function is associated with
a different virtual NIC. To the OS and the network, each physical function appears as a separate NIC port.
Network Management
Management Support The HP 533 FLR-T adapter can be administered from HP Systems Insight Manager (SIM). The adapters can
be managed individually or in teams, providing SNMP based statistics for reporting purposes. The HP 533
FLR-T adapter can also be managed by other applications with SNMP support.
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Standard Features
DA - 14616 North America — Version 2 — May 9, 2014 Page 4

Server Integration The HP 533 FLR-T adapter is a validated, tested, and qualified solution that is optimized for HP ProLiant
servers. HP validates a wide variety of major operating systems drivers with the full suite of web-based
enterprise management utilities including HP Intelligent Provisioning and HP Systems Insight Manager that
simplify network management.
This approach provides a more robust and reliable networking solution than offerings from other venders
and provides users with a single point of contact for both their servers and their network adapters.
Configuration Utilities Each HP 533 FLR-T ships with a suite of operating system-tailored configuration utilities that allow the
user to enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for
Microsoft Windows operating systems. Additionally, support for scripted installations of teams in a
Microsoft Windows environment allow for unattended OS installations.
LED Indicators The colored LEDs on each port of the HP 533 FLR-T adapter indicate link status and link activity.
Preboot eXecution
Environment (PXE)
PXE allows the server to boot over the network and download software residing in the network.
HP Sea of Sensors 3D Support for HP's Sea of Sensors which is a collection of 32 sensors that automatically track thermal
activity - heat - across the server. When temperatures get too high, sensors can kick on fans and make
other adjustments to reduce energy usage. What makes it better is the upgrade from all six fans kicking on
at one time to a new system where only one kicks on - the one in proximity of the area that started heating
up - thus reducing the amount of energy used for cooling.
VMware NetQueue and
Microsoft Virtual Machine
Queue (VMQ)
VMware NetQueue is technology that significantly improves performance of 10 Gigabit Ethernet network
adapters in virtualized environments.
Microsoft Virtual Machine Queue (VMQ) is a feature available on servers running Windows Server 2008 R2
with VMQ-enabled Ethernet adapters. VMQ uses hardware packet filtering to deliver packet data from an
external virtual machine network directly to virtual machines, which reduces the overhead of routing
packets and copying them from the management operating system to the virtual machine.
The HP 530T supports VMware NetQueue and Microsoft Virtual Machine Queue.
Warranty Maximum: The remaining warranty of the HP product in which it is installed (to a maximum three-year,
limited warranty).
Minimum: One year limited warranty.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Standard Features
DA - 14616 North America — Version 2 — May 9, 2014 Page 5

Service and Support HP Technology Services
HP Technology Services offers you technical consultants and support expertise to solve your most
complex infrastructure problems. We help keep your business running, boost availability, and avoid
downtime.
Protect your business beyond warranty with HP Care Pack Services
When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care
Pack services provide total care and support expertise with committed response choices designed to meet
your IT and business need.
HP Foundation Care services deliver scalable support-packages for HP industry-standard servers and
software. You can choose the type and level of service that is most suitable for your business needs. New
to this portfolio is HP Collaborative Support. If you are running business critical environments, HP offers
Proactive Care or Critical Advantage. These services help you deliver high levels of application availability
through proactive service management and advanced technical response.
Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For
customized support service solution, HP can work with you to tailor a service solution for your unique
support requirements using broader services portfolio of Foundation Care and Proactive Care.
Recommended HP Care Pack Services for optimal satisfaction with your HP product
Recommended Services 3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized representative who will arrive on
site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
OR
3-Year HP 24x7 4 hour Response, HP Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution, and
basic software problem diagnosis, fault isolation, and resolution if available to HP. If the problem is with
HP HW, the representative will arrive on site any time and day of the year to begin hardware maintenance
service within 4 hours of the service request being logged. In case, the issue is with HP or supported third-
party software product and cannot be resolved by applying known fixes, HP will contact the third-party
vendor and create a problem incident on your behalf.
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Service and Support
DA - 14616 North America — Version 2 — May 9, 2014 Page 6

Related HP Care Pack Services to enhance your HP product experience
Related Services 3-Year HP 24x7 4 hour Response, Proactive Care or Critical Advantage
Helps optimize your systems and delivers high levels of application availability through proactive service
management and advanced technical response. A skilled Technical Manager will own your query or issue
end to end until resolved, delivering a single point of contact for you
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-2140ENW.pdf
OR
3-Year HP 6-hour Onsite Call-to-Repair, HP Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to
return the hardware in operating condition within 6 hours of the initial service request to the HP Global
Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to HP. In
case, the issue is with HP or supported third-party software product and cannot be resolved by applying
known fixes, HP will contact the third-party vendor and create a problem incident on your behalf.
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf
Insight Remote Support Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://www.hp.com/go/insightremotesupport
HP Support Center Personalized online support portal with access to information, tools and experts to support HP business
products. Submit support cases online, chat with HP experts, access support resources or collaborate with
peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App * allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty,
HP Care Pack or HP contractual support agreement.
*HP Support Center Mobile App is subject to local availability
Parts and materials HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements. Supplies and consumable parts will not be provided as part of this service;
standard warranty terms and conditions apply. Parts and components that have exceeded their maximum
supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating
manual or the technical product data sheet will not be provided, repaired or replaced as part of this service.
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Service and Support
DA - 14616 North America — Version 2 — May 9, 2014 Page 7

Warranty / Service
Coverage
For ProLiant servers and storage systems, this service covers HP-branded hardware options qualified for
the server, purchased at the same time or afterward, internal to the enclosure, as well as external
monitors up to 22" and tower UPS products; these items will be covered at the same service level and for
the same coverage period as the server unless the maximum supported lifetime and/or the maximum
usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty terms
and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have
not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded
maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating
manual or the technical data sheet are not eligible for the defective media retention service feature option.
For more information To learn more on services for HP ESSN Options, please contact your HP sales representative or HP
Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant or
www.hp.com/services/bladesystem
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Service and Support
DA - 14616 North America — Version 2 — May 9, 2014 Page 8

Gigabit Server Adapters HP NC112T PCI Express Gigabit Server Adapter 503746-B21
HP NC360T PCI-E Dual Port Gigabit Server Adapter 412648-B21
HP NC364T PCI-E Quad Port Gigabit Server Adapter 435508-B21
HP NC365T 4-port Ethernet Server Adapter 593722-B21
HP NC373F PCI-E Multifunction 1000SX Gigabit Svr Adapter 394793-B21
HP NC373T PCI-E Multifunction Gigabit Server Adapter 394791-B21
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter 458492-B21
HP Ethernet 1Gb 4-port 331T Adapter 647594-B21
HP Ethernet 1Gb 2-port 332T Adapter 615732-B21
HP Ethernet 1Gb 2-port 361T Adapter 652497-B21
10 Gigabit Server
Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
HP NC523SFP 10Gb 2-port Server Adapter 593717-B21
HP NC550SFP Dual Port 10GbE Server Adapter 581201-B21
HP NC552SFP 10Gb 2-port Ethernet Server Adapter 614203-B21
HP Ethernet 10Gb 2-port 530SFP Adapter 652503-B21
HP Ethernet 10Gb 2-port 530T Adapter 656596-B21
HP Ethernet 10Gb 2-port 560SFP+ Adapter 665249-B21
HP Ethernet 10Gb 2-port 561T Adapter 716591-B21
HP Ethernet 10Gb 2-port 570SFP+ Adapter 718904-B21
FlexibleLOM Adapters NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
Ethernet Adapters
HP Ethernet 1Gb 4-port 331FLR Adapter 629135-B21
HP Ethernet 1Gb 4-port 366FLR Adapter 665240-B21
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter 647581-B21
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter 665243-B21
HP Ethernet 10Gb 2-port 561FLR-T Adapter 700699-B21
FlexFabric Adapters
HP FlexFabric 10Gb 2-port 526FLR SFP+ Adapter 629138-B21
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter 700751-B21
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter 629142-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Related Options
DA - 14616 North America — Version 2 — May 9, 2014 Page 9

General Specifications Network Processor Broadcom BCM57810S chipset
Data Rate Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth.
Onboard Memory 256MB
Bus Type PCIe v2.0 (Gen 2) x 8
Form Factor Standard and low profile adapter compliant with the PCIe standard
IEEE Compliance 802.3, 802.3x, 802.2x, 802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb, 802.1Qbg,
802.1ax
Connector RJ-45 (Two)
Wiring CAT6 UTP or better twisted-pair
Cable Distance Maximum distances for CAT6 cable are 30 meters (98 feet).
Maximum distances for CAT6a are 100 meters (328 feet).
NOTE: The HP 530T adapter can use existing UTP CAT6 (or better) cable to deliver Gigabit Ethernet over
copper, according to the IEEE 802.3an specifications. For new installations, CAT6a cable is recommended.
Cabling details:
CAT6 UTP or better twisted-pair
22-26 AWG, 100? @ 1 MHz
EIA/TIA 568-B.2-10b
Power and Environmental
Specifications
Operating Temperature 32° to 131° F (0° to 55° C)
Humidity 5% to 95% non-condensing
Power 9W maximum
Emissions classification 15.5W typical, 18.2W maximum
Agency approvals USA FCC Part 15 Class A
Canada ICES=003, Issue 4
Japan VCCI V3 (2010.04) Class A
International EN55022:2006 + A1:2007 Class A,
EN55024:1998+A1:2011+A2; EN61000-3-2:2006,
EN61000-3-3:2008
Taiwan BSMI, CNS13438 (2006) Class A
Australia/New Zealand
(AS/NZS):
EN55022:2006+A12007 class A
Korea KN22 Class A, KN24
RoHS Compliance 6 of 6
Safety UL Mark (USA and Canada)
CE Mark
EN 60590
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Technical Specifications
DA - 14616 North America — Version 2 — May 9, 2014 Page 10

Operating System
Support
Microsoft Windows Server 2008 (32/64), Enterprise, Standard, Datacenter, Web, Embedded, Foundation
(SP2 and R2 w/SP1)
Microsoft Windows HPC Server 2008 (SP2 and R2 w/SP1)
Microsoft Windows Small Business Server 2011 (SBS V7) - Base
Microsoft Windows Small Business Server 2011 Essentials
Microsoft Windows Multipoint Server 2011
Microsoft Windows Server 2012
Hyper-V (R2 w/SP1)
RHEL 5.7/5.8/5.9 x86 and AMD 64 & EM 64T
RHEL 6.1/6.2/6.3 x86 and AMD 64 & EM 64T
SLES 10 SP4 x86 and AMD 64 & EM 64T
SLES 11 SP2 x86 and AMD 64 & EM 64T
Solaris 10/11
VMware vSphere 4.1 and 5.0
Citrix XenServer 6.0/6.1
NOTE: For more Linux OS support & certification information, please visit our the ProLiant & BladeSystem
Server Linux matrix: http://h18004.www1.hp.com/products/servers/linux/hplinuxcert.html
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green . To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green . These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Windows is a US registered trademark of Microsoft Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
QuickSpecs
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
Technical Specifications
DA - 14616 North America — Version 2 — May 9, 2014 Page 11