HP NC6170 User manual

HP NC6170 Dual Port PCI-X
1000SX Gigabit Server Adapter
User Guide
June 2007 (Second Edition)
Part Number 331901-00B

Intel® is a trademark of Intel Corporation in the U.S. and other countries.
Hewlett-Packard Development Company, L.P. shall not be liable for technical or editorial errors or omissions
contained herein. The information in this document is provided “as is” without warranty of any kind and is subject
to change without notice. The warranties for HP products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as constituting an additional warranty.
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with
FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical
Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter User Guide
June 2007 (Second Edition)
Part Number 331901-00B
© 2003, 2007 Hewlett-Packard Development Company, L.P.

Contents
About This Guide
Technician Notes...........................................................................................................................................v
Where to Go for Additional Help.................................................................................................................vi
Telephone Numbers...............................................................................................................................vi
Chapter 1
Introduction
Overview ................................................................................................................................................... 1-1
Hardware Overview .................................................................................................................................. 1-1
LED Indicators.................................................................................................................................... 1-2
Chapter 2
Installing the Adapter
Overview ................................................................................................................................................... 2-1
Electrostatic Discharge Precautions .......................................................................................................... 2-1
Installing the Adapter in a Server.............................................................................................................. 2-2
Connecting the Network Cable ................................................................................................................. 2-2
Appendix A
Regulatory Compliance Notice
European Notice....................................................................................................................................... A-1
BSMI Notice............................................................................................................................................. A-1
Korean Notice........................................................................................................................................... A-2
Laser Compliance..................................................................................................................................... A-2
Appendix B
Electrostatic Discharge
Overview ...................................................................................................................................................B-1
Grounding Methods...................................................................................................................................B-1
Appendix C
Specifications
HP NC6170 Gigabit Server Adapter Specifications..................................................................................C-1
Fiber Cable Specifications.........................................................................................................................C-2
HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter User Guide iii

HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter User Guide v
About This Guide
This guide can be used for reference when installing the HP NC6170 Dual Port PCI-X
1000SX Gigabit Server Adapter.
WARNING: To reduce the risk of personal injury from electric shock and hazardous
energy levels, only authorized service technicians should attempt to repair this
equipment. Improper repairs can create conditions that are hazardous.
Technician Notes
WARNING: Only authorized technicians trained by HP should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module-level repair. Because of the complexity of the individual boards
and subassemblies, no one should attempt to make repairs at the component level or
to make modifications to any printed wiring board. Improper repairs can create a safety
hazard.
WARNING: To reduce the risk of personal injury from electric shock and hazardous
energy levels, do not exceed the level of repairs specified in these procedures.
Because of the complexity of the individual boards and subassemblies, do not attempt
to make repairs at the component level or to make modifications to any printed wiring
board. Improper repairs can create conditions that are hazardous.
WARNING: To reduce the risk of electric shock or damage to the equipment:
•Disconnect power from the system by unplugging all power cords from the power
supplies.
•Do not disable the power cord grounding plug. The grounding plug is an important
safety feature.
•Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
CAUTION: To properly ventilate the system, you must provide at least 7.6 cm (3.0 in.) of
clearance at the front and back of the server.
CAUTION: The computer is designed to be electrically grounded (earthed). To ensure proper
operation, plug the AC power cord into a properly grounded AC outlet only.

About This Guide
vi HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter User Guide
NOTE: Any indications of component replacement or printed wiring board modifications may void any
warranty.
Where to Go for Additional Help
HP updates networking software frequently to include new functionality and features.
Complete the following steps to get the latest drivers, firmware, and documentation.
1. Go to the HP website (http://www.hp.com).
2. Click Support and Troubleshooting Information from the left menu bar.
3. Type the product name in the for product box and press Enter. For example, type
NC370T.
4. Download the drivers, firmware, or documentation as needed.
Telephone Numbers
For the name of your nearest HP authorized reseller:
•In the United States, call 1-800-345-1518.
•In Canada, call 1-800-263-5868.
For HP technical support:
•In the United States and Canada, call 1-800-652-6672.
•Outside the United States and Canada, refer to
www.hp.com

HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide 1-1
1
Introduction
Overview
The HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter is a high performance,
stand-alone Ethernet adapter with a single, integrated, dual port controller chip that delivers
1000 Mb/s Ethernet over fiber cabling. For best performance, install the adapter in a
64-bit/133MHz, PCI-X slot. The adapter provides failover capabilities with other Gigabit and
10/100 adapters installed in the workstation or server. The NC6170 Gigabit Server Adapter is
a supported option for selected HP ProLiant servers.
For the latest functionality, features, and operating system support for this server adapter,
refer to the networking page at
(http://h18004.www1.hp.com/products/servers/networking/index-nic.html)
Hardware Overview
The HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter supports current standards
for system manageability and power management, such as Advanced Configuration and
Power Interface (ACPI) and Advanced Power Management (APM). The adapter has two fiber
LC ports and LED indicators for activity/link. Refer to Table 1-1 for a description of LED
operations.

Introduction
1-2 HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter User Guide
Figure 1-1: NC6170 Gigabit Server Adapter
LED Indicators
The HP NC6170 Gigabit Server Adapter LED indicators operate as described in the
following table.
Table 1-1: LED Operations for the HP NC6170 Gigabit Server Adapter
LED Status Description
On Link to the adapter is established. The adapter is receiving power
and the cable connection is secure.
Off No link to the adapter is established. The adapter is not receiving
power or the cable connection is faulty.
ACT/LINK
Flashing The adapter is receiving direct packets or broadcast packets for
this specific adapter. When sending packets, the ACT light is also
active due to network acknowledgements received.

HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide 2-1
2
Installing the Adapter
Overview
This chapter describes installation precautions, how to install the adapter, and how to attach
the fiber network cable.
WARNING: To avoid the risk of personal injury or damage to the equipment, consult
the safety information and user documentation provided with your equipment before
attempting installation of the adapter.
Many servers are capable of producing energy levels that are considered hazardous.
Users should not remove enclosures, nor should they bypass the interlocks provided
for removal of these hazardous conditions.
Installation of this adapter should be performed by individuals who are both qualified in
the servicing of computer equipment, and trained in the hazards associated with
products capable of producing hazardous energy levels.
NOTE: Before removing the cover of your server, refer to the HP documentation for the proper
methods for installing a PCI card and avoiding electric shock hazards.
Electrostatic Discharge Precautions
A discharge of static electricity from a finger or other conductor can damage components on
the adapter. This can make the adapter inoperable. In addition to the following information,
refer to Appendix B for more precautions.
To prevent electrostatic damage, observe the following precautions:
•Always properly ground yourself when touching a static-sensitive component or
assembly.
•Avoid hand contact by transporting and storing parts in static-safe containers.
•Keep electrostatic-sensitive parts in their containers until they arrive at static-free
locations.
•Place containers on a grounded surface before removing the contents.
•Avoid touching pins, leads, or circuitry.

Installing the Adapter
2-2 HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide
Installing the Adapter in a Server
Refer to the HP ProLiant server documentation for additional information on how to safely
install a PCI card in the server.
Figure 2-1: Installing the adapter in a server
WARNING: If the server is not PCI Hot Plug compliant, power it down and unplug the
power cord from the power outlet before removing the server cover. Failure to do so
may damage the adapter or server.
1. Remove the power cord and server cover. Then remove the cover bracket from a
PCI/PCI-X slot.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
system components to cool before touching them.
2. Firmly seat the adapter in the PCI/PCI-X slot and secure the adapter bracket.
3. Replace the server cover and plug in the power cord.
Connecting the Network Cable
The HP NC6170 Gigabit Server Adapter uses LC fiber ports. These ports support multimode
fiber with a maximum cable length dependent on the fiber type, mode, and cable size. Refer
to Appendix C for maximum cable lengths.
To insert the LC connector into the adapter port, line up the slot on the fiber connector with
the adapter and gently push until the retainers click into place.

HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide A-1
A
Regulatory Compliance Notice
European Notice
Products bearing the CE marking comply with the EMC Directive (89/336/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission of the European Community, and
if this product has telecommunication functionality, the R&TTE Directive (1999/5/EC).
Compliance with these directives implies conformity to the following European Norms (in
parentheses are the equivalent international standards and regulations):
•EN 55022 (CISPR 22)—Electromagnetic Interference
•EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11)—Electromagnetic Immunity
•EN61000-3-2 (IEC61000-3-2)—Power Line Harmonics
•EN61000-3-3 (IEC61000-3-3)—Power Line Flicker
•EN 60950 (IEC 60950)—Product Safety
BSMI Notice

Regulatory Compliance Notice
A-2 HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide
Korean Notice
Laser Compliance
The fiber optic module contains a laser that is classified as a “Class 1 Laser Product” in
accordance with US FDA regulations and the IEC 60825-1. The product does not emit
hazardous laser radiation.
WARNING: Use of controls or adjustments or performance of procedures other than
those specified herein or in the laser product’s installation guide may result in
hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:
•Do not try to open the module enclosure. There are no user-serviceable
components inside.
•Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
•Allow only HP Authorized Service technicians to repair the unit.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States. This device is classified as a Class 1
laser product as defined by IEC 60825-1.

B
Electrostatic Discharge
Overview
To prevent damage to the system, be aware of the precautions you need to follow when
setting up the system or handling parts. A discharge of static electricity from a finger or other
conductor may damage system boards or other static-sensitive devices. This type of damage
may reduce the life expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
•Avoid hand contact by transporting and storing products in static-safe containers.
•Keep electrostatic-sensitive parts in their containers until they arrive at static-free
workstations.
•Place containers on a grounded surface before removing the contents.
•Avoid touching pins, leads, or circuitry.
•Always be properly grounded when touching a static-sensitive component or assembly.
Grounding Methods
There are several methods for grounding. Use one or more of the following methods when
handling or installing electrostatic-sensitive parts:
•Use a wrist strap connected by a ground cord to a grounded workstation or computer
chassis. Wrist straps are flexible straps with a minimum of 1 megohm ±10 percent
resistance in the ground cords. To provide proper ground, wear the strap snug against the
skin.
•Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on
both feet when standing on conductive floors or dissipating floor mats.
•Use conductive field service tools.
•Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an HP
authorized reseller install the part.
NOTE: For more information on static electricity or assistance with product installation, contact your HP
authorized reseller.
HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide B-1

C
Specifications
HP NC6170 Gigabit Server Adpater Specifications
Table C-1: NC6170 Gigabit Server Adapter Specifications
Specification Description
Network Controller Chipset Intel® 82546 EB Dual MAC/Phy/SERDES
Bus Type PCI-X/PCI
Bus Width 32- or 64-bit
Bus Speed (MHz) 33/66/100/133
Data Transfer Method Bus Master DMA
On-board Memory 128 KB
Power Requirement 1000 mA @ 5V max
Data Transmission Rate 1000 Mb/s (Full-duplex)
Standards Supported IEEE 802.3z, 802.3x, 802.1p, 802.1Q, 802.3ad (static configuration
mode only)
Dimensions 6.6 x 4.8 inches (L x W), 16.5 cm x 12.2 cm (including bracket)
Connectors Two LC low profile
Cable Distances See Table C-2
Interrupts Supported Automatically configured
Temperature Range Operating: 0°C to 55°C / 32°F to 131°F
Storage: -65°C to 85°C / -85°F to 185°F
Relative Humidity Operating: 10% to 90%
Storage: 5% to 95%
Agency Approvals •FCC Class B
•VCCI Class B
•BSMI Class A
•CISPR 22 Class B
•EN60950
•MIC Class B
•EN 55022 Class B
•EN55024-1
•UL
•Canada UL
•ICES-003 Class B
HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide C-1

Specifications
Fiber Cable Specifications
To connect to the network, the NC6170 Server Adapter uses a 1000Base-SX fiber transeiver
with an LC fiber connector. Table C-2 describes the mode, cable size, and maximum distance
specifications for this adapter.
Table C-2: Fiber Cable Maximum Distances for 1000Base-SX
Mode Size Max Distance
Multimode 62.5/125 μm 220 meters
Multimode 50/125 μm 550 meters
C-2 HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide