USDT
SFF
CMT
Processor and Speed*
One of the following
Intel Celeron Processors:
Intel Celeron 430 Processor (1.8-GHz, 512K L2 cache, 800-MHz FSB)
XXX
Intel Pentium D Processors:
Intel Pentium D 925 Processor (3.0-GHz, 2x2MB L2 cache, 800-MHz FSB)
XXX
Intel Pentium D 945 Processor (3.4-GHz, 2x2MB L2 cache, 800-MHz FSB)
XXX
Intel Core 2 Duo Processors:
Intel Core 2 Duo E4300 Processor (1.80-GHz, 2 MB L2 cache, 800-MHz FSB)
XXX
Intel Core 2 Duo E4400 Processor (2.00-GHz, 2 MB L2 cache, 800-MHz FSB)
XXX
Intel Core 2 Duo E6300 Processor (1.86-GHz, 2 MB L2 cache, 1066-MHz FSB)
XXX
Intel Core 2 Duo E6400 Processor (2.13-GHz, 2 MB L2 cache, 1066-MHz FSB)
XXX
Intel Core 2 Duo E6600 Processor (2.40-GHz, 4 MB L2 cache, 1066-MHz FSB)
XXX
Intel Core 2 Duo E6700 Processor (2.66-GHz, 4 MB L2 cache, 1066-MHz FSB)
XXX
* Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family,
not across different processor families.
USDT
SFF
CMT
Intel vPro Technology*
Uses AMT 2.0 (Active Management Technology) for network alerting and
management of systems regardless of power state, as well as operating system-
absent environments
XXX
*
Units configured with this feature are referred to as HP Compaq dc7700p Business PCs.
Memory
DDR2 SYNCH DRAM NON-ECC MEMORY
Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes. This
chart does not represent all possible memory configurations. The Intel Q965 Express chipsets support
non-ECC DDR2 PC2-5300 (667-MHz) and PC2-6400 (800-MHz) memory.
CAUTION:
You must shut down the computer
and disconnect the power cord
before adding or removing
memory modules. Regardless of the power-on state, voltage is always supplied to the memory modules
as long as the computer is plugged in to an active AC outlet. Adding or removing memory modules while
voltage is present may cause irreparable damage to the memory modules or system board.
HP recommends dual-channel symmetric configurations for maximum performance.
For best performance, add the same amount of total memory to each channel and do not mix speeds. For
dual-channel symmetric performance, the total amount of memory in each channel must be equal. If
speeds are mixed, speed will default to the slowest DIMM.
Ultra-slim Desktop
Maximum Memory
*
Supports up to 3 GB of DDR2 SYNCH DRAM.
Slot 1 is black and must always be populated. Not all memory
configurations possible are represented below.
QuickSpecs
HP Compaq dc7700 Business PC
Standard Features and Configurable Components
DA - 12543 Canada — Version 34 — October 29, 2008
Page 9