HP Elite 7000 Microtower Installation instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP Elite 7000 Microtower Business PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
3
Batteries
All types including standard alkaline and lithium coin
or button style batteries Inside mainboard
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Inside power supply
2
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Fans
3
Components and parts containing toner and ink,
Include the cartridges, print heads, tubes, vent

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
including liquids, semi-liquids (gel/paste) and toner
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
1.3 Markings for plastic parts greater than 25 grams
Plastic Part Name
Plastic Part
Description
Weight
(grams)
ISO 11469:2000 Plastic Part
Mark
Optional:
Photo
Spruce Main Bezel
Main front bezel piece
150
>ABS<
Spruce Bezel Frame
Front bezel frame
194
>ABS<
System Fan Frame
Fan Frame
47
>PBT-GF30-FR(17)<
CPU Heatsink Fan
Frame
Fan Frame
37
>PBT-GF30-FR(17)<
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screwdriver
T-15
Micro shear
170II
Screwdriver
PH1
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. SYSTEM BOARD
1.1 Remove the access panel:
a) Remove the screw that secure the access panel to the computer chassis. (see Figure 1 below)
b) Pull the panel off the unit. (see Figure 2 below)
1.2 Disconnect the data cables from the board.(see Figure 3-7 below)
a) Disconnect the CPU cable and ATX cables from the board.
b) Disconnect the ODD cable and HDD cable from the board.
c) Disconnect the power switch cable and front I/O cable from the board.

EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
1.3 Remove the Graphic card from the system board(see Figure 8-11)
a) Loose the screw that secure PCI card with chassis
b) Remove the metal baffle
c) Pull the switch of the PCI_E slot
d) Remove the Graphic card from the slot
1.4 Remove the system fan.(see Figure 12&13 below)
a) Remove the cables from mainboard.
b) Loose the screws and remove the system fan from chassis.
1.5 Remove the processor from the system board: (see Figure 14-18 below)
a) Remove the processor fan cable from the board
b) Loosen the screws that secures the CPU fan to the system board.
c) Lift the heat sink from atop the processor and set it on its side to keep from contaminating the work area with thermal
grease.
d) Rotate the handle and lift the processor from the socket.
1.6 Remove the Memery.(see Figure 19&20 below)
a) push the two handles of the DIMM slot
b) Lift the memery from the DIMM slot
1.7 Remove the system board: (see Figure 21-&22 below)
a) Remove the screws that secure the system board to the chassis .
b) Lift the system board towards then remove it.
2. BATTERY
2.1 Release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery. Then the
battery pops up, lift it out.(see Figure 23 below).
3. SYSTEM DRIVERS
3.1 Remove the HDD.(see Figure 24-30 below)

EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
a) Remove the cables connect to the HDD.
b) Loose the screws that secure the HDD cage to chassis
c) Push the handle and push the HDD cage off the chassis
d) Loose the screws on thetwo side of the HDD cage
e) Pull the HDD from the HDD cage
3.2 Remove the ODD.(see Figure 31-34 below)
a) Remove the cables connect to the ODD.
b) Pull outward on all three tabs on the front bezel.
c) Loose the screws on the ODD cage
d) Lift the handle and pull the ODD out of the ODD cage.
3.3 Remove the front I/O.(see Figure 35-37 below)
a) Loose the screw that secure the front I/O to chassis.
b) Cut the plastic cable clamp that secures the cables to the cover
c) Lift the Front I/O and pull it out of the chassis.
3.4 Remove the power on/off switch.(see Figure 38&39 below)
a) Extrusion the bottom of the switch.
b) Pull the switch out of the chassis.
4. POWER SUPPLY
4.1 Take off the power supply: (see Figure 40-43 below)
a) Remove the four screws that secure the power supply to the chassis.
b) Press the baffle and slide the power supply toward the front of the computer,
c) Lift the power supply out of the chassis.
4.2 Remove the cover from the power supply: (see Figures 44-48 below)
a) Remove the six screws that secure the cover to the power supply chassis.
b) Cut the plastic cable clamp that secures the cables to the cover.

EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
c) Lift the cover off the power supply.
d) Cut the plastic cable clamp that secures the cables to the power cable.
e) Remove the four screws of the PFC module.
f) Lift the PFC out of the power supply cage.
4.3 Remove the power supply fan (see Figures 49&50)
a) Remove the four screws on the power supply
b) Lift the power supply fan from the cage.
4.4 Remove the power supply PCA: (see Figure 51-55 below)
a) Remove the screw that secure the ground to the cage.
b) Remove the screw that secure the switch to the chassis
c) Push the switch and light out of the cage.
d) Remove the four screws that secure the power supply PCA to the chassis.
e) Remove the power supply PCA from the power supply chassis.
4.4 Remove the Electrolytic Capacitors:(see Figure 56&57 below)
a) Using Soldering Iron, heat the solder of Electrolytic Capacitors.
b) Remove the Electrolytic Capacitors.
5.
6.
7.
8.
9.
10.
11.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Page 6
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure 1 Remove the screw on the cover
Figure 2 pull out the blade card
Figure 3 Disconnect the cables from the board
Figure 4 Disconnect the cables from the board
Figure 5 Disconnect the cables from the board
Figure 6 Disconnect the cables from the board

EL-MF877-00 Page 7
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure 7 Disconnect the cables from the board
Figure 8 Loose the screw of PCI shielding
Figure 9 Remove the PCI shield
Figure 10 Push the switch of PCI_E slot
Figure 11 Remove the Graphic card from the board
Figure12 Disconnect the system fan from the board

EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure 13 Loose the four screws and remove the fan
Figure 14 Remove the CPU fan cable from the board
Figure 15 Loose the four screws of the fan
Figure 16 Remove the CPU fan
Figure 17 Rotate the handle and open it up
Figure 18 Remove the processor from the socket.

EL-MF877-00 Page 9
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure 19 Push the two handles of the DIMM slot
Figure 20 Lift the memory from the DIMM slot
Figure 21 Loose the four screws on the PCA
Figure 22 Lift the mainboard from the chassis
Figure Remove the battery from the system board
Figure 24 Remove the cables connect to the HDD.

EL-MF877-00 Page 10
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure 25 Loose the screws on the HDD cage
Figure 26 Push the handle of the HDD cage
Figure 27 Pull the HDD cage off the chassis
Figure 28 Loose the screws on the side of HDD cage
Figure 29 Loose the screws on other side of HDD
cage
Figure 30 Pull the HDD from the HDD cage