HP df820 - 8" Series Digital Picture Frame User manual

HP df800 Series
Digital Picture Frame
數位相框
デジタル・ピクチャ・フレーム
디지털 액자
User Manual
使用說明書
ユーザー・マニュアル
사용 설명서
Revision 1.0a

FCC Compliance Statement
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, (example – use only
shielded interface cables when connecting to computer or peripheral
devices). Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

1
What’s in the Box
Qty Item Image
1 Digital Picture Frame
2 Additional Frames
1 Remote Control
1Universal Power Adapter
(9V, 1.5A, 100/240 switching)
1 USB 2.0 Cable
1 Warranty Document
1 User Manual
1 Remote Controller Holder
english

2
Getting Started
1. Connect the power cord into the DC input of the digital picture frame
and plug the adapter into a power outlet.
2. Unfold the attached stand to its extended position and push the
POWER button on the top of the digital picture frame.
3. Insert a memory card or USB storage device (external memory)
containing desired photos, music, and/or video into the appropriate
card slot or USB port as illustrated below. Note: Memory cards and
USB storage devices must be orientated correctly. Generally, labels
on these cards or USB devices must be facing outward as illustrated
below.
4. A slide show for your photos will automatically begin in a few
seconds. If music tracks are available on the same external memory
device, the slide show will be displayed with background music
unless disabled in Settings. Enjoy it and have fun!
english

3
Remote Control
MENU: Press to access menu mode.
ZOOM: Press to enlarge picture in browse mode.
UP: Press to move up in thumbnail mode or when setting
options.
PREV or RETURN: Press to move left in browse, thumbnail or
menu mode, or return to previous screen in slide show mode.
PLAY/PAUSE or MODE: Press to change display mode (slide
show, browse, or thumbnail). Press to play or pause music
or video les. Press to make selections in menu or settings
mode.
NEXT: Press to move right in browse, thumbnail or menu
mode.
DOWN: Press to move down in thumbnail mode or when
setting options.
VOL + / - : Press the + button to increase and the – button
to decrease audible playback volume.
COPY/DEL: Press this button in Browse, Thumbnail or MUSIC
mode to initiate the copy or delete process.
ROTATE: Press to rotate the picture during browse mode.
SLIDESHOW: Press this button to begin a photo slideshow.
Timer: Press this button to view calendar and press again to
view the clock mode.
SETUP: Press this button to open the setup menu.
english

4
Picture Frame
Top View: Power and Transport
Left Side View: USB Port and Mini USB Port for PC Connect
Right Side View: External Memory Slots
Power button & LED
PLAY/PAUSE/MODE button
MENU button
UP button
DOWN button
PREV button
NEXT button
USB SlotMini USB Slot
Power Input CF Card Slot SD/MMC/xD/MS Card Slot
english

5
Rear View: Remote Controller Holder
Remote Controller Holder
english

6
Key Features
Features
Add or delete photos from external memory devices, and internal memory.
Photo slide show with music
• 9 different photo transition options.
• Shuffle mode optional.
Photo slide show without music
• 9 different photo transition options.
• Shuffle mode optional.
Photos/Images
• View individual photos in Browse mode (see later section).
• View Photo thumbnails.
• Photo zoom and rotate.
Playback music/audio tracks
• Music tracks must be in an mp3 file format
Playback video clips
• Video clips must be in an Motion JPEG (.avi and .mov) file format.
Clock and Calendar
• Includes alarm clock functionality
Basic Brightness and Contrast adjustment controls
Basic Color and Tint adjustment controls
7 on screen display languages
• English, French, Spanish, Italian, German, Dutch, & Portuguese
english

7
Initial Setup
1. Pull tab from remote control to activate.
PULL
2. Power on the picture frame and press SETUP button.
3. Press the directional arrows to highlight “LANGUAGE”. Note: If
desired language is already selected, go to step 5.
4. Press button and use the directional arrow buttons to highlight
the desired On-Screen-Display language. Press to select the
language.
5. Change other settings by using the directional keys to highlight the
desired option and press to select the desired option.
english

8
IMAGE SIZE: Select “ORIGINAL” to display photos with their original
properties. Display photo in full height in normal aspect ratios.
Select “OPTIMAL” to allow the frame to display photos with optimized
properties. Photo(s) will enlarge to fit the full width of the screen.
The default option is “ORIGINAL”.
SLIDE TRANSITION: Choose from 9 options and select the desired
transition. The default option is set to “RANDOM”.
SLIDE SHOW SPEED: Select the desired photo display length. Options
are: 5, 10, 30, 60 SECONDS, I HOUR, and 24 HOURS. The default
option is “5 SECONDS”.
SLIDE SHOW SHUFFLE: Select “ON” to display photos in a random
order. Photos will not repeat until all have been displayed.
Select “OFF” to display photos in sequential order. The default option
is set to “OFF”.
RESET SETTINGS: Select this to restore all options to factory default
settings. A confirmation prompt will be displayed before settings are
reset.
LANGUAGE: Select this to choose the desired screen language option.
The default is “ENGLISH”.
BRIGHTNESS/CONTRAST: Select this option to change the displays
brightness and contrast properties.
Use the & buttons to change the display contrast. Use
the & buttons to change the display brightness.
COLOR/TINT: Select this option to change the displays color and tint
properties.
Use the & buttons to change the display color. Use the
& buttons to change the display tint.
english

9
BACKGROUND MUSIC: Turn background music on or off during the
slide show. Note: Only mp3 file formats are supported for playback.
TIME OPTION: Select “12H” for standard AM and PM time display.
Select “24H” for a 24 hour clock display.
english

10
Photo/Music/Video Content Management
The HP Digital Picture Frame can play back content from internal and
external memory devices such as USB Flash drives and memory cards
typically used with digital cameras. More than one external memory
device can be inserted; however, content from one memory source
can be selected for playback at any given time. To select the desired
memory source, press the button TWICE and use the arrow keys
to highlight the appropriate memory icon. Press the to select this
content source. Example illustrated below:
or
There are two methods on how to get content in the internal memory.
From external memory device: Insert external memory device
with desired content into the appropriate connector. A slide
show will automatically begin. Press the button to stop
the slide show. Use the & buttons to navigate to the
desired photo. Press the button to start the copy process.
Follow the on screen prompts as illustrated below to copy
the photo onto the frame’s internal memory. Repeat for each
desired photo/image.
NOTE: Only one photo/picture can be copied (or deleted) at a
time from or to external memory devices.
english

11
To copy audio files, press the button. Use the arrow
buttons to navigate to the icon and press the
button. Select the desired audio file and repeat the copy
process as previously illustrated.
If desired, content can be copied onto external memory devices
from the internal memory. Select the internal memory source
and repeat the copy process but select the desired external
memory device as the memory destination location.
english

12
From a PC/notebook: For the first connection, it is
recommended to remove all external memory sources. Power
on the HP Digital Picture Frame and connect the HP Digital
Picture Frame to your Windows™ 2000 (with service pack 4
or greater), Windows™ XP (with Service Pack 2 or greater), or
Windows™ Vista PC/notebook by using the USB cable provide
with product (see illustration below):
3 new drive letters will appear in Windows Explorer. These
new drive letters represent the Digital Picture Frame’s internal
memory, Memory card slot 1 and Memory card slot 2. The
digital picture frame will display the graphic below:
1 of the 3 new drive letters is the HP Digital Picture Frame’s
internal memory and will be labeled HP df800. Drive
letter assignment MAY vary from PC to PC. Use standard
Windows™ copy and paste procedures to move content onto
the frame’s internal memory. To check the picture frame's
available memory, right click on the internal memory drive
letter and select Properties. A properties menu will appear
displaying the available/Free space (in Mega Bytes[MB]).
Disconnect the PC/notebook when desired content has been
copied successfully.
english

13
Removing content from memory: Content can be removed/
deleted from internal and external memory in the same manner
as it was added. Select the desired photo/music file to be
deleted and press the button. Use the arrow button to
highlight the DELETE button icon and press the to confirm
this action as illustrated below:
Follow the on screen menus to complete the task. Repeat the
process for each file to be deleted.
english

14
Photo/Picture Slide Show
Slide show modes
Slide show mode will begin automatically a few seconds after the frame
is powered on or when an external memory card/USB Flash drive is
inserted. There are two slide show modes, one with background music
and the other without. Review the Initial Setup section of this document
for details on how to change desired settings.
Browse mode
To exit slideshow mode, press once. “Browse mode” will be dis-
played on the lower right section of the screen for a few seconds. This
allows forward and previous photo viewing as well as a copy/delete,
rotate, and zoom options.
Thumbnail mode
To view photos/pictures in thumbnail mode, press the twice when
in slideshow mode or once when in browse mode.
english

15
Music Playback
Press to access the menu screen.
Use the directional arrows to select the icon then press .
The frame will display a list of music/audio files found on the selected
memory source as illustrated below.
The first music track in the list will begin to play.
• The default playback mode is to play from first to last track
then repeat from the first track.
Supported audio format: MP3
english

16
Video Playback
Press the button to access the menu screen of the frame.
Use the directional arrows to select the icon then press to
conrm.
The frame will display a list of supported video clips/les found on the
selected memory source as illustrated below.
Press the and buttons to select a desired video clip. Press
to start playback.
• The default playback mode will automatically play the next
video clip until the end of the list, and then start over from the
beginning.
Supported Video format: Motion JPEG (.avi and .mov)
english

17
Calendar
Press to access the menu screen.
Use the directional buttons to select the icon then press .
The frame will display the calendar screen similar to the illustration
below.
The calendar will display the current date. To adjust the date, review
the next section titled Clock Setup and Viewing.
Use the & buttons to view the previous or next month(s).
Use the & buttons to highlight the different days in the
month.
english

18
Clock Setup and Viewing
Press to access the menu screen.
Use the directional buttons to select the icon then press .
The frame will display the Clock screen as illustrated below.
To change the clock time and alarm settings, press the button
and the hour number will begin to flash.
Use the & buttons to change the clock option settings.
Use the & buttons to move between the clock options.
Press when desired date, time, and alarm settings are selected.
NOTE: The HP df800 Digital Picture Frame has a Real Time Clock (RTC)
battery backup that allows the clock to maintain correct date and time
when powered off. It is important that the df800 remains powered up
for at least 6 hours to achieve a full charge. Once fully charged, the
battery backup will allow the df800 to be powered down up to 36
hours. If the df800 is powered off for more than the battery limits, the
date and time will need to be reconfigured.
english