HP 650 G1 Assembly instructions

Product End-of-Life Disassembly Instructions
Product Category: Notebooks and Tablet PCs
Marketing Name / Model
[List multiple models if applicable.]
HP ProBook 650 G1 Notebook PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
1
Batteries
All types including standard alkaline and lithium coin
or button style batteries
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01

Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1
Cross head
of screwdriver
Description #2
TORX T8
(2.31mm)
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Follow steps described in Disassembly instruction (file attached)
2. If parts can be removed without using a tool, remove it first.
3. Use correct screwdriver and torque value before unlock the screw.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01

MANUFACTURING PROCESS INSTRUCTIONS
MECHANICAL ASSEMBLY
MODEL :Cyclone 15B
A. Current station version list
B. Version Modify list
Revision Date Station Content Ver. Design
0.1 2013/08/27 ALL FIRST VERSION 0.1 Stanley
Chen
Sub-assembly name: LCM DIS ASS‘Y
Document No.: Cyclone 15B LCM DIS ASS'Y SOP
Written by: Stanley Chen Revision: 0.1
Date: 2013/08/27 Page: 1 of 15
Station Ver. Station Ver. Station Ver. Station Ver.
1 0.1 11 0.1
2 0.1 12 0.1
3 0.1 13 0.1
4 0.1 14 0.1
5 0.1
6 0.1
7 0.1
8 0.1
9 0.1
10 0.1
Auditor ：Alicia Chien
Tabulator：
Stanley Chen

Standard Operation Procedure
Document No. Cyclone 15B LCM DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：
Stanley Chen
Fig.1
disassembly Hinge Cap 1(1/1)
2013/08/27
0.1
1. Put the LCM on support fixture.
2. Loosen screw (6052B0031301) * 1, take out
the hinge cap - R (6051B0812901).(Fig.1 )
and recycle it .
3. Loosen screw (6052B0031301) * 1, take out
the hinge cap - L (6051B0812801). (Fig.2 )
and recycle it .
Fig.2
Electric cross screwdriver (#0) 1
Hinge CAP support fixture 1
LCM support fixture 1

Standard Operation Procedure
Document No. Cyclone 15B LCM DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：
Stanley Chen
Fig.1
disassembly Bezel
1. disassembly bezel in order. (Fig.1)
2. Recycle bezel.
For MIC/B Model: plug (Fig.2)
For Camera/B Model: lens (Fig.3)
2(1/1)
2013/08/27
0.1
3
1
2
2
Transparent
lens
Black plug
MIC/B Model Camera/B Model
Fig.2 Fig.3
Model
P/N
Print
Cyclone
6070B0685901
650
Thriller
6070B0685902
655

Standard Operation Procedure
Document No. Cyclone 15B LCM DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：
Stanley Chen
1. Loosen LCD screw (6052A0035101) * 4.
(Fig.1)
Electric cross screwdriver(#1) 1
3(1/1)
2013/08/27
0.1
Loosen Panel Screws
Fig.1
1 4
3
2

Standard Operation Procedure
Document No. Cyclone 15B LCM DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：
Stanley Chen
1. Take the LCM module on the working table
(Fig. 1)
2. Rip the mylar, then disconnect the LCD
cable. (Fig.1)
3. Recycle LCM module
Fig.1
4(1/1)
2013/08/27
0.1
disassembly LCD

Standard Operation Procedure
Document No. Cyclone 15B LCM DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：
Stanley Chen
Loosen Hinge BRKT Screws 5(1/1)
2013/08/27
1. Loosen hinge BRKT screw (6052B0096201)
* 6. (Fig.1 / Fig.2)
Electric cross screwdriver(#1) 1
Fig.1
0.1
1
2
3
4
5 6
Fig.2

Standard Operation Procedure
Document No. Cyclone 15B LCM DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：
Stanley Chen
disassembly Hinge BRKT 6(1/1)
2013/08/27
1. Loosen screw (6052B0120001) * 2. (Fig.2)
2. disassembly hinge BRKT –R & L and recycle
them .
Electric cross screwdriver(#1) 1
Fig.1
Fig.2
0.1
Vendor
Hinge P/N - R
Hinge P/N - L
新日兴
6055B0027702
6055B0027701
万禾
6055B0027902
6055B0027901
1
2

Standard Operation Procedure
Document No. Cyclone 15B LCM DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：
Stanley Chen
1. disassembly the left side WWAN / WLAN
antenna.
(Fig.1)
Fig.1
disassemblyAntenna –L 7(1/1)
2013/08/27
0.1