HP EliteDisplay E240ce Installation instructions

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDisplay E240ce23.8-inch Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
Power Board, USB Board, IF Board, Keypad
6
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.

Tool Description
Tool Size (if
applicable)
Cross Screwdriver
M2/M3/M4
Six corner sleeve Screwdriver
M3
Slotted Screwdriver
M4
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Lay the monitor on the desk, push the quick relrases button.Separate the stand from display.
2. Separate the four screws from Bucket.
3. Separate frontbezel from bucket, over turn the display and turn the bucket，separate the speaker line.
4. Separate the speaker from the bucket.
5. Sperate the lync keypad Line from lync keypad.Separate the lyncpad from the front bezel.
6. Sperate the camera from frontbezel.
7. Take out the ACE Tape and Aluminum Foil, then separate the LVDs Cable. Move away the Speakers and Chassis.
8. Unlock the 1 screws ,separate the USB chassis from main chassis.
9. Unlock the 9 screws and separate USB Shield from Chassis separate IF Board and Power Board from Chassis.
10. Unlock 2 screwS and separate the USB Board from USB shield.
11. Separate the Lines from PCB Board.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Below action which may easily damage product .please notice it
Lay the
monitor on
the desk,
push the
quick
relrases
button.Sepa
rate the
stand from
display.
N/A
Separate the
four screws
from
Bucket.
M4 Slotted
screwdriver
Separate
frontbezel
from
bucket,
over turn
the display
and turn the
bucket，
separate the
speaker
line.
N/A

Separate the
speaker
from the
bucket.
Cross
Screwdriver
Sperate the
lync keypad
Line from
lync
keypad.Sep
arate the
lyncpad
from the
front bezel.
Cross
Screwdriver
Sperate the
camera
from
frontbezel.
N/A
Take out
the ACE
Tape and
Aluminum
Foil, then
separate the
LVDs
Cable.
Move away
the
Speakers
and
Chassis.
N/A
Unlock the
1
screws ,sep
arate the
USB
chassis
from main
chassis.
Cross
Screwdriver
Six corner
sleeve
Screwdriver
Unlock the
9 screws
and
separate
USB Shield
from
Chassis
separate IF
Board and
Power
Board from
Chassis.
Cross
Screwdriver
Six corner
sleeve
Screwdriver

Unlock 2
screwS and
separate the
USB Board
from USB
shield.
Cross
Screwdriver
Separate the
Lines from
PCB Board.
M3 Cross
Screwdriver