HP Z24i User manual

1. Menu Opens, selects or exits the OSD menu. 4. OK/Auto If the OSD menu is on, press to select the
highlighted menu item. If the OSD menu is
inactive, press to activate the auto
adjustment feature to optimize the screen
image.
2. Minus "-" If the OSD menu is on, press to navigate
backward through the OSD menu and
decrease adjustment levels.
5. Power/Power LED Turns the monitor on or off.
LED:
fully powered = white;
sleep mode = amber;
sleep timer mode = flashing amber.
3. Plus"+"/Input If the OSD menu is on, press to navigate
forward through the OSD menu and
increase adjustment levels.
If the OSD menu is inactive, press to
activate the source button that chooses the
video signal input (VGA, DVI, or
DisplayPort).
QuickSpecs
HP Z24i 24-inch IPS Display
Overview
DA - 14672 Worldwide — Version 4 — October 3, 2013 Page 1

Models
D7P53A4, D7P53A8, D7P53AS, D7P53AT
QuickSpecs
HP Z24i 24-inch IPS Display
Overview
DA - 14672 Worldwide — Version 4 — October 3, 2013 Page 2

Panel Type 24-inch IPS Gen 2, LED Backlit
Viewable Image Area
(diagonal)
60,96 cm (24 in) widescreen; diagonally measured
Panel Active Area
(W x H)
51,84 x 32,4 cm (20.4 x 12.75 in.)
Panel Type Gen 2 IPS (Gen 2 technology, also called AH-IPS, enables lower power
consumption).
Resolution 1920 x 1200 @ 60 Hz
Aspect Ratio 16:10
Viewing Angle (typical) Up to 178° horizontal/178° vertical (10:1 minimum contrast ratio)
Brightness (typical) * 300 nits (cd/m
2
)
Contrast Ratio (typical) * 1,000:1
Dynamic Contrast Ratio
(typical) *
5,000,000:1
Response Time (typical) * 8 ms gray to gray
Pixel Pitch 0.270 mm
Backlight Lamp Life
(to half brightness)
30,000 hours minimum
Color Support ** 16.7 million colors
Color Gamut
Size vs. NTSC (CIE 1931)
Size vs. NTSC (CIE 1976)
Coverage of sRGB (CIE
1976)
7277%
90%
99%
*All performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
** With the use of FRC technology.
User Controls Buttons or Switches Menu, Minus ("-"), Plus ("+") /Input, OK/Auto, Power
Languages 10 (English, Spanish, German, French, Italian, Netherlands, Portuguese, Japanese,
T-Chinese and S-Chinese)
On Screen Display
(OSD) User Controls
Brightness, Contrast, Color, Image Control, OSD control, Management, Language,
Information, Factory Reset, Input Control
Signal Interface/
Performance
Horizontal Frequency 24-94 kHz
Vertical Frequency 50.76 Hz
Native Resolution 1920 x 1200 @ 60 Hz
Preset VESA Graphic
Modes (non-interlaced)
640 x 480 @ 60Hz
720 x 400 @ 70 Hz
800 x 600 @ 60 Hz
1024 x 768 @ 60 Hz
1280 x 720 @ 60 Hz
1280 x 800 @ 60 Hz
1280 x 1024 @ 60 Hz
1440 x 900 @ 60 Hz
QuickSpecs
HP Z24i 24-inch IPS Display
Technical Specifications
DA - 14672 Worldwide — Version 4 — October 3, 2013 Page 3

1600 x 1200 @ 60 Hz
1680 x 1050 @ 60 Hz
1920 x 1080 @ 60 Hz
1920 x 1200 @ 60 Hz
Maximum Pixel Clock
Speed
200 MHz
User Programmable
Modes
Yes, 20
Anti-Glare Yes
Default Color
Temperature
6500 K
Video/Other Inputs Plug and Play Yes
Self Powered USB 2.0
Hub
One upstream, four downstream ports (cable included)
Input Connectors 1 VGA, 1 DisplayPort 1.2 (1.1 compatible), 1 DVI-D; HDCP support on DisplayPort
and DVI
Sync Input Separate synch
Video Cables Included (1) DVI-D 1,8 m (5.9 ft), (1) DisplayPort 2 m (6.56 ft)
Power Power Supply Internal
Input Power 90 - 265 VAC at 45 - 63 Hz
ENERGY STAR® Power
1
25.4 W
Default Power
2
36 W
Maximum Power
3
55 W
Sleep/Off Mode Power > 0.5 W
Power Cable Length 1,9 m (6.2 ft)
Mechanical Dimensions (W x D x H) Unpacked w/stand
(highest setting)
55,94 x 23,79 x 52,5 cm
(22.02 x 9.37 x 20.67 in)
Unpacked w/o stand
(head only)
55,94 x 6,45 x 36,5 cm
(22.02 x 2.54 x 14.37 in)
Packaged 66 x 45 x 30,1 cm
(25,98 x 17.72 x 11.85 in)
Weight Head Only 4,73 kg (10.43 lbs)
Unpacked 6,96 kg (15.35 lbs)
Packaged 9,14 kg (20.15 lbs)
Ergonomic Features 4-Way Comfort Adjust Easily adjust the display in height, tilt, swivel and pivot for maximum comfort.
Integrated Quick
Release
5
An easy-to-use, VESA-compliant, LCD monitor mounting solution that allows you
to quickly and securely attach an LCD monitor to a variety of stands, brackets,
arms or wall mounts.
Cable Management Enhanced cable management for easy concealment of power, video and USB
cables. Effortless routing of cables through the cable management tunnel at the
base of the column.
Detachable Stand Yes, ships detached
Tilt Range -5° to + 30° vertical
QuickSpecs
HP Z24i 24-inch IPS Display
Technical Specifications
DA - 14672 Worldwide — Version 4 — October 3, 2013 Page 4

Swivel Range 45°L to 45°R
Height Adjustable Yes, 0 to 120 mm
Pivot Rotation Yes
Environmental Temperature -
Operating
5° to 35° C (41° to 95° F)
Temperature - Non-
operating
-20° to 60° C (-4° to 140° F)
Humidity - Operating 20% to 80% non-condensing
Humidity - Non-
operating
5% to 95%, 38.7° C max wet-bulb
Altitude - Operating 0 to 5,000 m (16,404 ft)
Altitude - Non-
operating
0 to 12,192 m (0 to 40,000 ft)
White LED Backlights Yes
CCFL Panel No
Arsenic-Free Display
Glass
Yes
Low Halogen
4
Yes
Mercury-Free Display
Backlighting
Yes
Environmental Data Eco-Label Certifications
& declarations
This product has received or is in the process of being certified to the following
approvals and may be labeled with one or more of these marks:
IT ECO declaration
US ENERGY STAR®
TCO 06
EPEAT® Gold where HP registers Commercial Display products. See
http://www.epeat.net for registration status in your country US Federal
Energy Management Program (FEMP)
Energy Consumption
(in accordance with US
ENERGY STAR® test
method)
115VAC, 60Hz 230VAC, 50Hz 100VAC, 60Hz
Normal Operation 15.57 W 15.51 W 15.7 W
Sleep 0.16 W 0.22 W 0.15 W
Off 0.15 W 0.2 W 0.14 W
Heat Dissipation * 115VAC, 60Hz 230VAC, 50Hz 100VAC, 60Hz
Normal Operation 53 BTU/hr 53 BTU/hr 53 BTU/hr
Sleep 1 BTU/hr 1 BTU/hr 1 BTU/hr
Off 1 BTU/hr 1 BTU/hr 0.4 BTU/hr
* Heat dissipation is calculated based on the measured watts, assuming the
service level is attained for one hour.
QuickSpecs
HP Z24i 24-inch IPS Display
Technical Specifications
DA - 14672 Worldwide — Version 4 — October 3, 2013 Page 5

Additional Information This product is in compliance with the Restrictions of Hazardous
Substances (RoHS) directive - 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the
<Gold> level, see: www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per
ISO 11469 and ISO1043.
This product contains 17.7 % post-consumer recycled plastic (by wt.)
This product is 98.50% recycle-able when properly disposed of at end of
life.
Packaging Materials External: PAPER/Corrugated 1265 g
Internal: PLASTIC/EPS (Expanded
Polystyrene)
450 g
PLASTIC/Polystyrene High
Impact
55 g
RoHS Compliance Hewlett-Packard is committed to compliance with all applicable environmental
laws and regulations, including the European Union Restriction of Hazardous
Substances (RoHS) Directive. HP's goal is to exceed compliance obligations by
meeting the requirements of the RoHS Directive on a worldwide basis. By July 1,
2006, RoHS substances will be virtually eliminated (virtually = to levels below
legal limits) for all HP electronic products subject to the RoHS Directive, except
where it is widely recognized that there is no technically feasible alternative (as
indicated by an exemption under the EU RoHS Directive).
Material Usage This product does not contain any of the following substances in excess of
regulatory limits (refer to the HP General Specification for the Environment at:
http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/
gen_specifications.html ):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants - may not be used as flame
retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel - finishes must not be used on the external surface designed to be
frequently handled or carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
QuickSpecs
HP Z24i 24-inch IPS Display
Technical Specifications
DA - 14672 Worldwide — Version 4 — October 3, 2013 Page 6

Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) - except for wires and cables, and certain retail
packaging has been voluntarily removed from most applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
Packaging HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and corrugated
materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return and recycling programs in
many geographic areas. To recycle your product, please go to:
http://www.hp.com/go/reuse-recycle or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a responsible
manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard web site at:
http://www.hp.com/go/recyclers . These instructions may be used by recyclers
and other WEEE treatment facilities as well as HP OEM customers who integrate
and re-sell HP equipment.
Hewlett-Packard
Corporate
Environmental
Information
For more information about HP's commitment to the environment:
Global Citizenship Report
http://www.hp.com/hpinfo/globalcitizenship/gcreport/index.html
Eco-label certifications
http://www.hp.com/hpinfo/globalcitizenship/environment/
productdesign/ecolabels.html
ISO 14001 certificates:
http://www.hp.com/hpinfo/globalcitizenship/environment/operations/
envmanagement.html
Options
For more information
refer to the product's
QuickSpecs.
HP Thin Client Mount
Kit-Part number
E5J35AA
Attach your HP Thin Client or USDT PC to the back of select HP Z Displays and
maintain optimal ergonomic adjustability with the HP Thin Client Mount Kit.
Simply mount an HP Thin Client to the Kit's VESA plate, slide it into place on the
back of an HP Z24i, Z27i or Z30i IPS Display stand, and you're ready to go.
HP Dual Output USB
Graphics Adapter-Part
number C5U89AA
Create a dual-monitor setup with the HP Dual Output USB Graphics Adapter -
featuring both DVI-I and DisplayPort inputs to drive displays at high resolutions
through a single USB 3.0 connection to your PC.
QuickSpecs
HP Z24i 24-inch IPS Display
Technical Specifications
DA - 14672 Worldwide — Version 4 — October 3, 2013 Page 7

HP LCD Speaker Bar-
Part number NQ576AA
Powered directly by the monitor or the PC, the Speaker Bar seamlessly attaches
to the monitor's lower bezel to bring full audio support to select HP LCD monitors.
Features include dual speakers with full sound range and external jack for
headphones. Sold separately.
HP Business PC Security
Lock Kit-Part number
PV606AA
Attaches to the rear of the PC with a six-foot steel cable that can be used to secure
a PC or peripherals such as mice, keyboards, monitors or USB security devices to
protect them against unauthorized removal by physically connecting the system
to an anchor point.
HP Integrated Work
Center Stand - USDT and
Thin Clients)-Part
number LH526AA
Allows mounting of a 17 - 24 inch diagonal HP LCD monitor and an HP Compaq
dc8000 series Ultra-slim Desktop PC as well as select HP Thin Clients on a single
stand for the convenience of an "all-in-one" form factor.
HP Integrated Work
Center 2 - Small Form
Factor (SFF) -Part
number QP897AA
Designed specifically for use with the HP Compaq Small Form Factor (SFF)
Desktop PC and a 17 to 24-inch (43.18 to 60.96 cm) diagonal monitor, the HP
Integrated Work Center 2 (IWC) - Small Form Factor (SFF) provides a portable,
compact workspace to help maximize space-constrained work environments. (17
to 24-inch diagonal monitors need to meet supported weight limits of 7.5 to 12.1
lbs. (3.38 to 5.5 kg).
HP Single Monitor Arm-
Part number BT861AA
The flexible design of the HP Single Monitor Arm provides a seemingly endless
range of display adjustments with an amazing 13 inches of lift, 50 degrees of tilt,
and 360 degrees of pan and rotation - all at your fingertips -- helping you stay
comfortable and productive throughout the day.
HP Adjustable Dual
Display Stand-Part
Number AW664AA
Premium space-saving dual screen solution provides access to more monitor real
estate and makes it possible to manage multiple applications simultaneously.
Weight adjustable for dual monitors from 17-24". Rotate displays into
portrait/landscape positions.
HP DisplayPort Cable Kit
-Part number VN567AA
Connects a DisplayPort connector on an HP Business Desktop computer to a
DisplayPort connector on a monitor
HP Display and
Notebook Stand-Part
number AW662AA
Use two displays at once to increase productivity - your notebook display, plus
one external display up to 24 inches in size. The adaptable design of the HP
Adjustable Display Stand can accommodate a range of notebook sizes with the
innovative adjustable shelf.
HP Adjustable Display
Stand-Part number
AW663AA
Turn your HP Business Notebook into a desktop solution supporting up to a 24
inch display. A dual-hinged, smooth-motion display stand allows for greater
depth, height and tilt adjustment for maximum comfort.
What's in the box? Monitor and Accessories HP Z24i 24-inch IPS Display, AC power cord, USB cable, DisplayPort cable, DVI-D
cable.
Documentation CD (includes user guide, warranty, drivers)
Featured Software HP Display Assistant is a software utility that enables theft deterrence and allows
monitor adjustment, color calibration, and security/asset management using the
Display Data Channel Command Interface (DDC/CI) protocol of the connected PC or
workstation.
Other User Guide Languages English, Arabic, S. Chinese, T. Chinese, Czech, Danish, Dutch, Finnish, French,
German, Greek, Hungarian, Italian, Japanese, Kazakh, Korean, Norwegian, Polish,
Brazilian Portuguese, Russian, Slovenian, Spanish, Swedish and Turkish.
QuickSpecs
HP Z24i 24-inch IPS Display
Technical Specifications
DA - 14672 Worldwide — Version 4 — October 3, 2013 Page 8

Warranty Languages English, Arabic, S. Chinese, T. Chinese, Czech, Danish, Dutch, Finnish, French,
German, Greek, Hungarian, Italian, Japanese, Kazakh, Korean, Norwegian, Polish,
Brazilian Portuguese, Russian, Slovenian, Spanish, Swedish and Turkish.
Color Black
VESA External Mounting Yes (one set of standard 4-hole pattern, 100 mm). Use of the top VESA 4-hole
pattern will allow the user to set monitor head lower to the desk surface.
Security Lock-Ready Yes
Country of Origin China
Certification and
Compliance
CE, CB, KC, KCC, NOM, PSB, ICE, TUV-S, CCC, TCO Certified, CEL Grade 1, CECP, SEPA, EPA, ISC, VCCI, FCC, HSMI,
Microsoft WHQL Certification (Windows 8 and Windows 7), ENERGY STAR® Qualified, EPEAT® Gold
6
.
Compatibility Compatible with platforms using the VESA standard video modes. Recommended for use with HP products.
Service and Warranty Protected by HP, including a 3 year standard limited warranty. Optional HP Care Pack Services are extended
service contracts that extend your protection beyond the standard warranties.
7
1
ENERGY STAR® power is measured with factory defaults, brightness at ENERGY STAR® level of 200 cd/m2 and with no USB loads.
2
Default Power is measured with factory defaults, including factory default brightness and USB ports loaded at 25% of maximum.
3
Maximum Power is measured with monitor at maximum brightness and with USB ports loaded at 100% of maximum.
4
External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be
Low Halogen.
5
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting
surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the
VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to
determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting
solution is properly installed to support applied loads
6
EPEAT® Gold where HP registers commercial display products. See www.epeat.net for registration status in your country.
7
Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts from
date of hardware purchase. Restrictions and limitations apply. See www.hp.com/go/cpc for details.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
ENERGY STAR is a registered mark owned by the U.S. government. All specifications represent the typical specifications provided by
HP's component manufacturers; actual performance may vary either higher or lower. The only warranties for HP products and services
are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
QuickSpecs
HP Z24i 24-inch IPS Display
Technical Specifications
DA - 14672 Worldwide — Version 4 — October 3, 2013 Page 9