HP ProCurve 8116fl Assembly instructions

Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
ProCurve 8116fl Redundant Switch Fabric Module (J8730A)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA) With a surface greater than 10 sq cm 1 in product, 1
Batteries All types including standard alkaline and lithium coin
or button style batteries 0
Mercury-containing components For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries 0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm Includes background illuminated displays with gas discharge lamps 0
Cathode Ray Tubes (CRT) 0
Capacitors / condensers (Containing PCB/PCT) 0
0 Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords 0
Gas Discharge Lamps 0
Plastics containing Brominated Flame Retardants 0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. 0
Components and waste containing asbestos 0
Components, parts and materials containing
refractory ceramic fibers 0
Components, parts and materials containing 0
EL-MF877-00 Page 1
Template Revision A

EL-MF877-00 Page 2
Template Revision A
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description Tool Size (if
applicable)
Philips Head Screw Driver # 2
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Carefully detach the cable that is connecting the LEDs on one end of the bulkhead and the PCA on the other end.
Refer to Picture 1 for more details.
2. Remove the screws securing the bulkhead to PCA using a Philips screw driver (4 per for J8730A).
3. Remove the EMI gasket from the top (1 per) and the side (2 per) of the bulkhead. Refer to Picture 2 for more details.
4. Remove the screws securing the clip to heat sink using a Philips screw driver (24 per for J8730A). Refer to Picture 3
for more details
5. Separate the clip (12 per for J8730A) & standoff (24 for J8730A) from the heat sink.
6. Remove the screws securing the guide pins to the PCA using a Philips screw driver (3 per for J8730A). Refer to
Picture 4 for more details.
7. Separate the guide pins, heat sink, clip, standoff, EMI gasket, cable, PCA and bulkhead
8.
9.
10. .
11.
12.
13.
14.
15.
16.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Picture 1
Picture 2
EL-MF877-00 Page 3
Template Revision A

Picture 3
Picture 4
EL-MF877-00 Page 4
Template Revision A