HP 108164-003 - ProLiant - 800 User manual

Microsoft Windows Event ID and SNMP Traps
Reference Guide
For use with SmartStart version 8.25
Part number: 347870-009
Ninth edition: June 2009

Legal notices
© Copyright 2003, 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are
set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed
as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211
and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial
Items are licensed to the U.S. Government under vendor’s standard commercial license.
Microsoft®, Windows®, Windows NT®, and Windows Server®are U.S. registered trademarks of Microsoft Corporation.

Contents 3
Contents
Introduction ...........................................................................................................................................4
Windows NT®event log format ................................................................................................................. 4
Agent descriptions ................................................................................................................................... 4
Where to go for additional help ................................................................................................................ 5
Telephone numbers .................................................................................................................................. 5
Foundation agents..................................................................................................................................6
Event Identifiers 256-774.......................................................................................................................... 6
Event Identifiers 1105-1808...................................................................................................................... 9
Event Identifiers 2048-2359.................................................................................................................... 17
Event Identifiers 3072-3876.................................................................................................................... 21
Event Identifiers 4352-4626.................................................................................................................... 25
Storage agents.....................................................................................................................................29
Event Identifiers 256-774........................................................................................................................ 29
Event Identifiers 1061-1098.................................................................................................................... 32
Event Identifiers 1101-1199.................................................................................................................... 38
Event Identifiers 1200-1294.................................................................................................................... 64
Event Identifiers 1343-4613.................................................................................................................... 77
Server agents.......................................................................................................................................82
Event Identifiers 256-774........................................................................................................................ 82
Event Identifiers 1024-1092.................................................................................................................... 85
Event Identifiers 1103-1183.................................................................................................................... 93
Event Identifiers 1539-3352.................................................................................................................. 124
Event Identifiers 5632-5684.................................................................................................................. 126
NIC agents........................................................................................................................................129
Event Identifiers 256-299...................................................................................................................... 129
Event Identifiers 300-1293.................................................................................................................... 133

Introduction 4
Introduction
This document contains a listing of the Microsoft®Windows Server®2003 Event Log messages
associated with SNMP traps, which are generated by the HP Insight Management Agents for Servers
for Windows®. Each event entry has the corresponding SNMP trap number used by the agents. Other
information on the events in this document includes Event Severity, Event Message, Event Message
Source, Event Symptom, and Supporting SNMP Trap Data.
Windows NT®event log format
The following pages contain HP Insight Management events that are entered into the Microsoft®
Windows NT®Event Log when they occur.
Values are 32-bit values laid out as follows:
3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+-------+--+--+---------------------------------------------+---------------------------------------------------------------+
|Sev|C|R| Facility | Code |
+-------+--+--+---------------------------------------------+---------------------------------------------------------------+
where:
Sev—The severity code
00—Success
01—Informational
10—Warning
11—Error
C—The customer code flag
R—A reserved bit
Facility—The facility code (always “CPQ”)
Code—The facility’s status code—the event number; the upper byte refers to the HP Insight
Management Agent that served the event, the lower byte is the actual event number
Agent descriptions
•Foundation/Host Agent—cpqhsmsg
•Sever Agent—cpqsvmsg
•Storage Agent—cpqstmsg
•NIC Agent—cpqnimsg

Introduction 5
Where to go for additional help
In addition to this guide, the following information sources are available:
•User documentation
•HP Insight Manager software
Telephone numbers
For the name of the nearest HP authorized reseller:
•In the United States, see the HP US service locator webpage,
http://www.hp.com/service_locator.
•In other locations, see the HP website, http://www.hp.com.
For HP technical support:
•In North America:
○Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days
a week. For continuous quality improvement, calls may be recorded or monitored.
○If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more
information about Care Packs, see the HP website, http://www.hp.com.
•Outside North America, call the nearest HP Technical Support Phone Center. For telephone
numbers for worldwide Technical Support Centers, see the HP website, http://www.hp.com.

Foundation agents 6
Foundation agents
Event Identifiers 256-774
Event identifier: cpqhsmsg.dll - 256 (Hex)0x84350100 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service detected an error. The insertion string is: %1. The data
contains the error code.
Event identifier: cpqhsmsg.dll - 257 (Hex)0x84350101 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not allocate memory. The data contains the error
code.
Event identifier: cpqhsmsg.dll - 258 (Hex)0x84350102 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not register with the Service Control Manager.
The data contains the error code.
Event identifier: cpqhsmsg.dll - 259 (Hex)0x84350103 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not set the service status with the Service Control
Manager. The data contains the error code.
Event identifier: cpqhsmsg.dll - 260 (Hex)0x84350104 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not create an event object. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 261 (Hex)0x84350105 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not open registry key “%1”. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 262 (Hex)0x84350106 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not start any agents successfully.
Event identifier: cpqhsmsg.dll - 263 (Hex)0x84350107 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not read the registry value “%1”. The data
contains the error code.

Foundation agents 7
Event identifier: cpqhsmsg.dll - 264 (Hex)0x84350108 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not load the module “%1”. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 265 (Hex)0x84350109 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could get the control function for module “%1”. The
data contains the error code.
Event identifier: cpqhsmsg.dll - 266 (Hex)0x8435010a (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not initialize agent “%1”. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 267 (Hex)0x8435010b (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not start agent “%1”. The data contains the error
code.
Event identifier: cpqhsmsg.dll - 268 (Hex)0x8435010c (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service detected an invalid state for agent “%1”. The data
contains the state.
Event identifier: cpqhsmsg.dll - 269 (Hex)0x8435010d (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not stop agent “%1”. The data contains the error
code.
Event identifier: cpqhsmsg.dll - 270 (Hex)0x8435010e (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not terminate agent “%1”. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 271 (Hex)0x8435010f (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not unload the module “%1”. The data contains
the error code.
Event identifier: cpqhsmsg.dll - 272 (Hex)0x84350110 (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation Agents service could not create the registry key “%1”. The data
contains the error code.
Event identifier: cpqhsmsg.dll - 273 (Hex)0x84350111 (Service Event)
Log Severity: Warning (2)

Foundation agents 8
Log Message: The Foundation Agents service could not write the registry value “%1”. The data
contains the error code.
Event identifier: cpqhsmsg.dll - 399 (Hex)0xc435018f (Service Event)
Log Severity: Error (3)
Log Message: The Foundation Agents service encountered a fatal error. The service is terminating.
The data contains the error code.
Event identifier: cpqhsmsg.dll - 400 (Hex)0x44350190 (Service Event)
Log Severity: Information (1)
Log Message: The Foundation Agents service version %1 has started.
Event identifier: cpqhsmsg.dll - 401 (Hex)0x44350191 (Service Event)
Log Severity: Information (1)
Log Message: %1
Event identifier: cpqhsmsg.dll - 402 (Hex)0x44350192 (Service Event)
Log Severity: Information (1)
Log Message: The Foundation Agents could not find the SNMP service. Please install the SNMP
service to enabled remote management of the server.
Event identifier: cpqhsmsg.dll - 768 (Hex)0x84350300 (Service Event)
Log Severity: Warning (2)
Log Message: The Host Remote Alerter detected an invalid data type within an alert definition.
Event identifier: cpqhsmsg.dll - 769 (Hex)0x84350301 (Service Event)
Log Severity: Warning (2)
Log Message: The Host Remote Alerter detected an error while attempting to log an alert remotely.
The data contains the error code.
Event identifier: cpqhsmsg.dll - 770 (Hex)0x84350302 (Service Event)
Log Severity: Warning (2)
Log Message: The Host Remote Alerter detected an error while attempting to retrieve data from key =
%1 in the registry. The data contains the error code.
Event identifier: cpqhsmsg.dll - 771 (Hex)0x84350303 (Service Event)
Log Severity: Warning (2)
Log Message: The Host Remote Alerter was unable to log an event in the event log of the system
named %1. The data contains the error code.
Event identifier: cpqhsmsg.dll - 772 (Hex)0xc4350304 (Service Event)
Log Severity: Error (3)
Log Message: The Host Remote Alerter detected a null handle on initialization. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 773 (Hex)0xc4350305 (Service Event)
Log Severity: Error (3)

Foundation agents 9
Log Message: The Host Remote Alerter received an error on WaitForMultipleObjects call. The data
contains the error code.
Event identifier: cpqhsmsg.dll - 774 (Hex)0xc4350306 (Service Event)
Log Severity: Error (3)
Log Message: The Host Remote Alerter received an error on ResetEvent call. The data contains the
error code.
Event Identifiers 1105-1808
NT Event ID: 1105 (Hex)0x44350451 (cpqhsmsg.dll)
Log Severity: Information (1)
Log Message: %1
SNMP Trap: cpqHo2GenericTrap - 11003 in CPQHOST.MIB
Symptom: Generic trap.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqHoGenericData
Supporting SNMP Trap Description: “[cpqHoGenericData]”
NT Event ID: 1106 (Hex)0x44350452 (cpqhsmsg.dll)
Log Severity: Information (1)
Log Message: %1
SNMP Trap: cpqHo2AppErrorTrap - 11004 in CPQHOST.MIB
Symptom: An application has generated an exception. Specific error information is contained in the
variable cpqHoSwPerfAppErrorDesc.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqHoSwPerfAppErrorDesc
Supporting SNMP Trap Description: “[cpqHoSwPerfAppErrorDesc]”
NT Event ID: 1162 (Hex)0x8435048a (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: Rising Threshold Passed.
SNMP Trap: cpqMeRisingAlarmExtended - 10005 in CPQTHRSH.MIB
Symptom: Rising Threshold passed. An alarm entry has crossed its rising threshold. The instances of
those objects contained within the variable list are those of the alarm entry that generated this trap.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags

Foundation agents 10
•cpqMeAlarmVariable
•cpqMeAlarmSampleType
•cpqMeAlarmValue
•cpqMeAlarmRisingThreshold
•cpqMeAlarmOwner
•cpqMeAlarmSeverity
•cpqMeAlarmExtendedDescription
Supporting SNMP Trap Description: “[cpqMeAlarmOwner]: Variable [cpqMeAlarmVariable] has
value [cpqMeAlarmValue] >= [cpqMeAlarmRisingThreshold].”
NT Event ID: 1163 (Hex)0x8435048b (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: Falling Threshold Passed.
SNMP Trap: cpqMeFallingAlarmExtended - 10006 in CPQTHRSH.MIB
Symptom: Falling Threshold passed. An alarm entry has crossed its falling threshold. The instances of
those objects contained within the variable list are those of the alarm entry that generated this trap.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqMeAlarmVariable
•cpqMeAlarmSampleType
•cpqMeAlarmValue
•cpqMeAlarmFallingThreshold
•cpqMeAlarmOwner
•cpqMeAlarmSeverity
•cpqMeAlarmExtendedDescription
Supporting SNMP Trap Description: “[cpqMeAlarmOwner]: Variable [cpqMeAlarmVariable] has
value [cpqMeAlarmValue] <= [cpqMeAlarmFallingThreshold].”
NT Event ID: 1164 (Hex)0x8435048c (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: Critical Rising Threshold Passed.
SNMP Trap: cpqMeCriticalRisingAlarmExtended - 10007 in CPQTHRSH.MIB
Symptom: Critical Rising Threshold passed. An alarm entry has crossed its critical rising threshold. The
instances of those objects contained within the variable list are those of the alarm entry that generated
this trap.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqMeAlarmVariable
•cpqMeAlarmSampleType
•cpqMeAlarmValue

Foundation agents 11
•cpqMeAlarmRisingThreshold
•cpqMeAlarmOwner
•cpqMeAlarmSeverity
•cpqMeAlarmExtendedDescription
Supporting SNMP Trap Description: “[cpqMeAlarmOwner]: Variable [cpqMeAlarmVariable] has
value [cpqMeAlarmValue] <= [cpqMeAlarmRisingThreshold].”
NT Event ID: 1165 (Hex)0x8435048d (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: Critical Falling Threshold Passed.
SNMP Trap: cpqMeCriticalFallingAlarmExtended - 10008 in CPQTHRSH.MIB
Symptom: Critical Falling Threshold passed. An alarm entry has crossed its critical falling threshold.
The instances of those objects contained within the variable list are those of the alarm entry that
generated this trap.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqMeAlarmVariable
•cpqMeAlarmSampleType
•cpqMeAlarmValue
•cpqMeAlarmFallingThreshold
•cpqMeAlarmOwner
•cpqMeAlarmSeverity
•cpqMeAlarmExtendedDescription
Supporting SNMP Trap Description: “[cpqMeAlarmOwner]: Variable [cpqMeAlarmVariable] has
value [cpqMeAlarmValue] <= [cpqMeAlarmFallingThreshold].”
NT Event ID: 1166 (Hex)0x8435048e (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: %1
SNMP Trap: cpqHoProcessEventTrap - 11011 in CPQHOST.MIB
Symptom: A monitored process has either started or stopped running.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqHoSwRunningTrapDesc
Supporting SNMP Trap Description: “[cpqHoSwRunningTrapDesc]”
NT Event ID: 1167 (Hex)0x8435048f (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: The cluster resource %4 has become degraded.
SNMP Trap: cpqClusterResourceDegraded - 15005 in CPQCLUS.MIB

Foundation agents 12
Symptom: This trap is sent any time the condition of a cluster resource becomes degraded.
User Action: Make a note of the cluster resource name, and then check the resource for the cause of
the degraded condition.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqClusterResourceName
Supporting SNMP Trap Description: “Cluster resource [cpqClusterResourceName] has become
degraded.”
NT Event ID: 1168 (Hex)0xc4350490 (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: The cluster resource %4 has failed.
SNMP Trap: cpqClusterResourceFailed - 15006 in CPQCLUS.MIB
Symptom: This trap is sent any time the condition of a cluster resource has failed.
User Action: Make a note of the cluster resource name, and then check the resource for the cause of
the failure.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqClusterResourceName
Supporting SNMP Trap Description: “Cluster resource [cpqClusterResourceName] has failed.”
NT Event ID: 1169 (Hex)0x84350491 (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: The cluster network %4 has become degraded.
SNMP Trap: cpqClusterNetworkDegraded - 15007 in CPQCLUS.MIB
Symptom: This trap is sent any time the condition of a cluster network becomes degraded.
User Action: Make a note of the cluster network name, and then check the network for the cause of
the degraded condition.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqClusterNetworkName
Supporting SNMP Trap Description: “Cluster network [cpqClusterNetworkName] has become
degraded.”
NT Event ID: 1170 (Hex)0xc4350492 (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: The cluster network %4 has failed.
SNMP Trap: cpqClusterNetworkFailed - 15008 in CPQCLUS.MIB

Foundation agents 13
Symptom: This trap is sent any time the condition of a cluster network has failed.
User Action: Make a note of the cluster network name, and then check the network for the cause of
the failure.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqClusterNetworkName
Supporting SNMP Trap Description: “Cluster network [cpqClusterNetworkName] has failed.”
NT Event ID:1171 (Hex)0x84350493 (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: The cluster service on %4 has become degraded.
SNMP Trap: cpqClusterNodeDegraded - 15003 in CPQCLUS.MIB
Symptom: This trap is sent any time the condition of a node in the cluster becomes degraded.
User Action: Make a note of the cluster node name, and then check the node for the cause of the
degraded condition.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqClusterNodeName
Supporting SNMP Trap Description: “Cluster service on [cpqClusterNodeName] has become
degraded.”
NT Event ID: 1172 (Hex)0xc4350494 (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: The cluster service on %4 has failed.
SNMP Trap: cpqClusterNodeFailed - 15004 in CPQCLUS.MIB
Symptom: This trap is sent any time the condition of a node in the cluster has failed.
User Action: Make a note of the cluster node name, and then check the node for the cause of the
failure.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqClusterNodeName
Supporting SNMP Trap Description: “Cluster service on [cpqClusterNodeName] has failed.”
NT Event ID: 1173 (Hex)0x84350495 (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: The Processor Performance Instance, '%4' is degraded with Processor Time of %5
percent.
SNMP Trap: cpqOsCpuTimeDegraded - 19001 in CPQWINOS.MIB

Foundation agents 14
Symptom: The Processor Time performance property is set to degraded.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqOsCpuIndex
•cpqOsCpuInstance
•cpqOsCpuTimePercent
Supporting SNMP Trap Description: “The Processor performance Instance, [cpqOsCpuInstance] is
degraded with Processor Time of [cpqOsCpuTimePercent] percent.”
NT Event ID: 1174 (Hex)0xc4350496 (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: The Processor Performance Instance, '%4' is failed with Processor Time of %5 percent.
SNMP Trap: cpqOsCpuTimeFailed - 19002 in CPQWINOS.MIB
Symptom: The Processor Time performance property is set to critical.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqOsCpuIndex
•cpqOsCpuInstance
•cpqOsCpuTimePercent
Supporting SNMP Trap Description: “The Processor performance Instance, [cpqOsCpuInstance] is
critical with Processor Time of [cpqOsCpuTimePercent] percent.”
NT Event ID: 1175 (Hex)0x84350497 (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message:The Cache Performance Instance, '%4' is degraded with Cache Copy Read Hits of %5
percent.
SNMP Trap: cpqOsCacheCopyReadHitsDegraded - 19003 in CPQWINOS.MIB
Symptom: The Cache CopyReadHits performance property is set to degraded.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqOsCacheIndex
•cpqOsCacheInstance
•cpqOsCacheCopyReadHitsPercent
Supporting SNMP Trap Description: “The Cache performance property is degraded with
CopyReadHits of [cpqOsCacheCopyReadHitsPercent] percent.”
NT Event ID: 1176 (Hex)0xc4350498 (cpqhsmsg.dll)
Log Severity: Error (3)

Foundation agents 15
Log Message: The Cache Performance Instance, '%4' is failed with Cache Copy Read Hits of %5
percent.
SNMP Trap: cpqOsCacheCopyReadHitsFailed - 19004 in CPQWINOS.MIB
Symptom: The Cache CopyReadHits performance property is set to critical.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqOsCacheIndex
•cpqOsCacheInstance
•cpqOsCacheCopyReadHitsPercent
Supporting SNMP Trap Description: “The Cache performance property is critical with CopyReadHits
of [cpqOsCacheCopyReadHitsPercent] percent.”
NT Event ID: 1177 (Hex)0x84350499 (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: The PagingFile Performance Instance, '%4' is degraded with PagingFile Usage of %5
percent.
SNMP Trap: cpqOsPageFileUsageDegraded - 19005 in CPQWINOS.MIB
Symptom: The PagingFile Usage performance property is set to degraded.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqOsPagingFileIndex
•cpqOsPagingFileInstance
•cpqOsPageFileUsagePercent
Supporting SNMP Trap Description: “The PagingFile performance instance,
[cpqOsPagingFileInstance] is degraded with PagingFile Usage of [cpqOsPageFileUsagePercent]
percent.”
NT Event ID: 1178 (Hex)0xc435049a (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: The PagingFile Performance Instance, '%4' is failed with PagingFile Usage of %5
percent.
SNMP Trap: cpqOsPageFileUsageFailed - 19006 in CPQWINOS.MIB
Symptom: The PagingFile Usage performance property is set to critical.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqOsPagingFileIndex
•cpqOsPagingFileInstance
•cpqOsPageFileUsagePercent

Foundation agents 16
Supporting SNMP Trap Description: “The PagingFile performance instance,
[cpqOsPagingFileInstance] is critical with PagingFile Usage of [cpqOsPageFileUsagePercent]
percent.”
NT Event ID: 1179 (Hex)0x8435049b (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: The Logical Disk Performance Instance, '%4' is degraded with Disk Busy Time of %5
percent.
SNMP Trap: cpqOsLogicalDiskBusyTimeDegraded - 19007 in CPQWINOS.MIB
Symptom: The LogicalDisk BusyTime performance property is set to degraded.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqOsLogicalDiskIndex
•cpqOsLogicalDiskInstance
•cpqOsLogicalDiskBusyTimePercent
Supporting SNMP Trap Description: “The LogicalDisk performance instance,
[cpqOsLogicalDiskInstance] is degraded with DiskBusyTime of [cpqOsLogicalDiskBusyTimePercent]
percent.”
NT Event ID: 1180 (Hex)0xc435049c (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: The Logical Disk Performance Instance, '%4' is failed with Disk Busy Time of %5
percent.
SNMP Trap: cpqOsLogicalDiskBusyTimeFailed - 19008 in CPQWINOS.MIB
Symptom: The LogicalDisk BusyTime performance property is set to critical.
Supporting SNMP Trap Data:
•sysName
•cpqHoTrapFlags
•cpqOsLogicalDiskIndex
•cpqOsLogicalDiskInstance
•cpqOsLogicalDiskBusyTimePercent
Supporting SNMP Trap Description: “The LogicalDisk performance instance,
[cpqOsLogicalDiskInstance] is critical with DiskBusyTime of [cpqOsLogicalDiskBusyTimePercent]
percent.”
NT Event ID: 1181 (Hex)0xc435049d (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: '%4'
SNMP Trap: cpqHoCriticalSoftwareUpdateTrap - 11014 in CPQHOST.MIB
Symptom: This trap is sent to notify the user of a Critical Software Update.
Supporting SNMP Trap Data:
•sysName

Foundation agents 17
•cpqHoTrapFlags
•cpqHoCriticalSoftwareUpdateData
Supporting SNMP Trap Description: “[cpqHoCriticalSoftwareUpdateData]”
Event identifier: cpqhsmsg.dll - 1792 (Hex)0x84350700 (Service Event)
Log Severity: Warning (2)
Log Message: The agent is unable to generate traps due to an error during initialization.
Event identifier: cpqhsmsg.dll - 1795 (Hex)0x84350703 (Service Event)
Log Severity: Warning (2)
Log Message: The agent is older than other components. The agent is older than the other
components of the Management Agents. Reinstall all of the Management Agents to correct this error.
Event identifier: cpqhsmsg.dll - 1796 (Hex)0x84350704 (Service Event)
Log Severity: Warning (2)
Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other
components of the Management Agents. Reinstall all of the Management Agents to correct this error.
Event identifier: cpqhsmsg.dll - 1800 (Hex)0x84350708 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read security configuration information. SNMP sets have been disabled.
Event identifier: cpqhsmsg.dll - 1803 (Hex)0xc435070b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing
file. Reinstalling the Management Agents or running the Emergency Repair procedure may correct this
error.
Event identifier: cpqhsmsg.dll - 1806 (Hex)0x8435070e (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation SNMP Agent service is not running. The agent has determined that the
Foundation Agents service is not running. Stop the SNMP service and restart the Foundation Agents
service. If the error persists, reinstalling the Management Agents may correct this error.
Event identifier: cpqhsmsg.dll - 1808 (Hex)0x44350710 (Service Event)
Log Severity: Information (1)
Log Message: The agent could not deliver trap %1. The agent was unable to use Asynchronous
Management to deliver a trap. This can be caused by a failure in the Remote Access Service or by a
missing or invalid configuration. Use the Management Agents control panel to verify the
Asynchronous Management configuration settings. Use the Network control panel to verify the Remote
Access configuration. If this error persists, reinstalling the Management Agents or the Remote Access
Service may correct this error. For more information, see the Management Agents Asynchronous
Management documentation.
Event Identifiers 2048-2359
Event identifier: cpqhsmsg.dll - 2048 (Hex)0x84350800 (Service Event)

Foundation agents 18
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the
system will correct this error.
Event identifier: cpqhsmsg.dll - 2049 (Hex)0x84350801 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read from the registry. This error can be caused by a corrupt registry or a
low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 2050 (Hex)0x84350802 (Service Event)
Log Severity: Warning (2)
Log Message: Could not create the registry sub-key: “%1”. This error can be caused by a corrupt
registry or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 2051 (Hex)0x84350803 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read from the registry. This error can be caused by a corrupt registry or a
low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 2052 (Hex)0x84350804 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read “%1” from the registry. This error can be caused by a corrupt registry
or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 2053 (Hex)0x84350805 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read “%1” from the registry. This error can be caused by a corrupt registry
or a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 2056 (Hex)0x84350808 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to create thread. This error can be caused by a low memory condition.
Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 2098 (Hex)0x84350832 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to acquire file system information. This error can be caused by an unformatted
partition or by a partition that has been recently modified. Formatting the partition or rebooting the
server may correct this error.
Event identifier: cpqhsmsg.dll - 2099 (Hex)0x84350833 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to acquire file system information for %1. This error can be caused by a low
memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 2100 (Hex)0x84350834 (Service Event)
Log Severity: Warning (2)

Foundation agents 19
Log Message: Unable to acquire the current process list. This error can be caused by a low memory
condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 2101 (Hex)0x84350835 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to acquire the CPU performance data. This error can be caused by a low
memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 2304 (Hex)0x84350900 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not allocate memory. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2305 (Hex)0x84350901 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not open the base of the registry. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 2306 (Hex)0x84350902 (Service Event)
Log Severity: Warning (2)
Log Message: “%1”. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2307 (Hex)0x84350903 (Service Event)
Log Severity: Warning (2)
Log Message: “%1”. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2308 (Hex)0x84350904 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not read the registry value “%1”. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 2309 (Hex)0x84350905 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent found an incorrect type for registry value “%1”. The data contains
the type found.
Event identifier: cpqhsmsg.dll - 2310 (Hex)0x84350906 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not create a necessary event. The data contains the error
code.
Event identifier: cpqhsmsg.dll - 2311 (Hex)0x84350907 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not set an event. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2312 (Hex)0x84350908 (Service Event)
Log Severity: Warning (2)

Foundation agents 20
Log Message: The Threshold Agent could not create its main thread of execution. The data contains
the error code.
Event identifier: cpqhsmsg.dll - 2313 (Hex)0x84350909 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent main thread did not terminate properly. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 2314 (Hex)0x8435090a (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent got an unexpected error code while waiting for an event. The
data contains the error code.
Event identifier: cpqhsmsg.dll - 2315 (Hex)0x8435090b (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent did not respond to a request. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2316 (Hex)0x8435090c (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent received an unknown action code from the service. The data
contains the action code.
Event identifier: cpqhsmsg.dll - 2317 (Hex)0x8435090d (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not get the system type. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2354 (Hex)0x84350932 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not create an SNMP session. The data contains the error
code.
Event identifier: cpqhsmsg.dll - 2355 (Hex)0x84350933 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent SNMP request failed. The data contains the error code. Action: 1)
Be sure that the SNMP service is configured to allow SNMP requests from “localhost”. 2) Be sure that
there is an adequate amount of free memory.
Event identifier: cpqhsmsg.dll - 2356 (Hex)0x84350934 (Service Event)
Log Severity: Warning (2)
Log Message: “%1”. The data contains the error code.
Event identifier: cpqhsmsg.dll - 2357 (Hex)0x84350935 (Service Event)
Log Severity: Warning (2)
Log Message: The Threshold Agent could not set the variable because it is unsupported. The data
contains the error code.
Event identifier: cpqhsmsg.dll - 2358 (Hex)0x84350936 (Service Event)
Log Severity: Warning (2)