HP ProLiant DL360 G4 Installation instructions

Product End-of-Life Disassembly Instructions
Product Category: Servers
Marketing Name / Model
[List multiple models if applicable.]
HP ProLiant DL360G4 / DL360R04X3.4-MJD3 HP ProLiant DL360G4 / DL360R04X3.6-MMY3
HP ProLiant DL360G4 / DL360R04X3.4-MJD2 HP ProLiant DL360G4 / DL360R04X3.6-MMYN
HP ProLiant DL360G4 / DL360R04X3.0-MRB1 HP ProLiant DL360G4 / DL360R04X3.6-MMYM
HP ProLiant DL360G4 / DL360R04X3.4-MJD1
HP ProLiant DL360G4 / DL360R04X3.0-MRC1
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
EL-MF877-00 Page 1
Template Revision A
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA) With a surface greater than 10 sq cm 11
Batteries All types including standard alkaline and lithium coin
or button style batteries 2
Mercury-containing components For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm Includes background illuminated displays with gas discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height 7
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances

EL-MF877-00 Page 2
Template Revision A
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description Tool Size (if
applicable)
Torx Driver T-15
Flat Head Screw Driver Medium
Philips Driver # 2
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. System Board Battery – Remove the top cover and locate the battery on the system board. With a medium flat head
screw driver remove the battery and dispose of properly.
2. BBWC Battery – Locate the BBWC battery inside the server then with a medium flat head screw driver remove the
battery and dispose of properly.
3. Capacitors => 2.5CM – Remove the power supply from the system. With #2 Philips screw driver remove the screws
securing the top cover then locate the capacitors and pry from the PCB with a medium flat head screw driver and
dispose of properly.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Attachment 1 – Disassembly Diagram
Attachment 1, 2 & 3 – System Battery Location
Attachment 1 – Battery Backed Module Location
Attachment 1, 4 & 5 – Power Supply Capacitor Locations

Attachment 1
Attachment 2
EL-MF877-00 Page 3
Template Revision A

Attachment 3
Attachment 4
EL-MF877-00 Page 4
Template Revision A

Attachment 5
EL-MF877-00 Page 5
Template Revision A