HP INSIGHT DYNAMICS T8671-91017 User manual

HP Insight Dynamics 6.2 Getting Started
Guide
HP Part Number: T8671-91017
Published: October 2010
Edition: 1

©Copyright 2006-2010 Hewlett-Packard Development Company, L.P.
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial
Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under
vendor's standard commercial license.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
HP-UX Release 10.20 and later and HP-UX Release 11.00 and later (in both 32 and 64-bit configurations) on all HP 9000 computers are Open
Group UNIX 95 branded products.
Acknowledgments
UNIX is a registered trademark of The Open Group. Java is a US trademark of Sun Microsystems, Inc. Intel®and Itanium®are trademarks or
registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft®and Windows®are U.S.
registered trademarks of Microsoft Corporation.

Table of Contents
1 Introduction to HP Insight Dynamics.............................................................................5
Components of HP Insight Dynamics....................................................................................................5
HP Insight Virtualization Manager software....................................................................................6
Logical servers...................................................................................................................................6
HP Insight Capacity Advisor software.............................................................................................7
HP Insight Capacity Advisor Consolidation software......................................................................7
HP Insight Orchestration software....................................................................................................8
HP Insight Recovery software...........................................................................................................8
HP Storage Provisioning Manager....................................................................................................8
Application Discovery.......................................................................................................................9
HP Insight Global Workload Manager software for Integrity..........................................................9
HP Instant Capacity Manager...........................................................................................................9
Partition Manager............................................................................................................................10
Integrity Virtual Machines Manager...............................................................................................10
Product configurations.........................................................................................................................10
Features of Insight Dynamics...............................................................................................................11
2 License management...................................................................................................15
Insight Dynamics licensing model........................................................................................................15
Trial licenses..........................................................................................................................................15
End-user license agreement..................................................................................................................16
HP ProLiant servers and ProLiant server blades..................................................................................16
HP Integrity and HP 9000 servers and Integrity server blades............................................................17
Non-HP servers.....................................................................................................................................17
HP Insight Capacity Advisor Consolidation software.........................................................................18
Adding and applying licenses..............................................................................................................18
Recommended Process: Use the managed system setup wizard...................................................18
Alternative Process: Use HP SIM License Manager........................................................................18
Scan for HP-UX licenses........................................................................................................................19
License requirements for systems with HP Instant Capacity products...............................................20
3 Getting Started.............................................................................................................21
Installing the software...........................................................................................................................21
Configuring privilege elevation............................................................................................................21
Using the Insight managed system setup wizard................................................................................21
Configuring user authorizations..........................................................................................................21
Configuring data collection credentials................................................................................................22
Removing unneeded agent software....................................................................................................22
4 Troubleshooting............................................................................................................25
Memory and other system requirements.............................................................................................25
Insight managed system setup wizard.................................................................................................25
Diagnose menu actions.........................................................................................................................25
Check CMS configuration...............................................................................................................25
Check CMS to managed node communication...............................................................................26
Check managed node configuration...............................................................................................27
vseassist command...............................................................................................................................28
Table of Contents 3

5 Support and other resources.......................................................................................29
Contacting HP.......................................................................................................................................29
Related information..............................................................................................................................29
Manuals and white papers..............................................................................................................29
Installation and configuration: Microsoft Windows CMS.........................................................29
Installation and configuration: HP-UX CMS.............................................................................30
Using Insight Dynamics.............................................................................................................30
Websites...........................................................................................................................................31
Information and solutions..........................................................................................................31
Products......................................................................................................................................31
Command references (manpages)...................................................................................................31
Reference pages installed on the CMS.......................................................................................31
Reference pages installed with agent software on managed systems.......................................32
Reference page installed on cell-based complexes....................................................................32
Reference pages installed on systems running HP Integrity Virtual Machines........................33
Selected HP Systems Insight Manager software reference pages..............................................33
Typographic conventions......................................................................................................................33
Command reference........................................................................................................35
vseassist(1M).........................................................................................................................................36
vselicense(1M).......................................................................................................................................41
Glossary............................................................................................................................47
Index.................................................................................................................................51
4 Table of Contents

1 Introduction to HP Insight Dynamics
This document provides an overview of HP Insight Dynamics. It is intended to be used by system
administrators and other technical professionals involved with data center operations,
administration and planning.
•Chapter 1 describes the product features and the available configurations.
•Chapter 2 (page 15) describes the licensing model and license mangement procedures.
•Chapter 3 (page 21) describes initial setup steps to get started with Insight Dynamics.
•Chapter 4 (page 25) describes the tools available to set up managed systems correctly and
diagnose and correct common configuration problems.
•Chapter 5 (page 29) provides a list of support resources and a comprehensive list of Insight
Dynamics documentation.
•The Command reference (page 35) provides command reference pages for the vseassist(1M)
and vselicense(1M) commands that are mentioned elsewhere in this document.
•The Glossary (page 47) provides definitions of key terms used in this document. Initial
occurrences of terms with glossary definitions appear in italics. If you are viewing this
document in electronic form, click the italicized term to jump to the glossary definition.
HP Insight Dynamics is an integrated command center that enables you to continuously analyze
and optimize your adaptive infrastructure. It builds on the HP infrastructure management
portfolio, including HP Systems Insight Manager (HP SIM) and HP Insight software.
Insight Dynamics provides an integrated graphical environment for managing physical servers,
logical servers,virtual machines,server blades,nPartitions,virtual partitions, applications, and workloads.
You can dynamically resize virtual servers and migrate resources where they are needed, based
on service-level objectives and business requirements.
For information about the changes in this release of Insight Dynamics, see the HP Insight Dynamics
6.2 Release Notes. For a complete list of Insight Dynamics documentation and the web sites where
these documents can be found, see “Related information” (page 29).
IMPORTANT: The information in the following sections is a summary. Specific supported
hardware and software configurations are provided in the HP Insight Software 6.2 Support Matrix,
available at http://www.hp.com/go/insightdynamics/docs.
Components of HP Insight Dynamics
The Insight Dynamics software is installed on a Central Management Server (CMS) running HP
SIM, which provides a browser-based user interface. A single CMS can be used to manage
different types of systems. The software is installed on the CMS once, regardless of how many
or what types of managed system licenses are purchased. The following CMS installations are
supported:
•Insight Dynamics can be installed on the following types of CMS running Microsoft Windows:
— HP ProLiant server
—HP BladeSystem c-Class ProLiant server blade
—Virtual machine running under VMware ESX or Microsoft Hyper-V on HP ProLiant or
supported non-HP server
On a CMS running Microsoft Windows, Insight Dynamics is installed as part of the Insight
software family of products. For installation and configuration information, see HP Insight
Software 6.2 Preinstallation Worksheet,HP Insight Software 6.2 Quick Installation Guide, and HP
Insight Software 6.2 Installation and Configuration Guide. For an introduction to Insight software,
Components of HP Insight Dynamics 5

including security recommendations, summary of included products, and documentation
roadmap, see HP Insight Software 6.2 Getting Started Guide.
•Insight Dynamics can be installed on the following types of CMS running HP-UX:
— HP Integrity server
— HP Integrity server blade
— virtual machine running under HP Integrity Virtual Machines
For installation on a CMS running HP-UX, see HP Insight Dynamics 6.2 Integrity CMS
Installation and Configuration Guide.
The following sections summarize the major software components of Insight Dynamics. For
more information, see the user guides and other documents listed in “Related information”
(page 29). Help is also available within the software by clicking the button in the upper right
of most screens.
HP Insight Virtualization Manager software
Virtualization Manager provides the framework for visualizing your virtual server environment.
All of the systems and workloads that you are authorized to view are displayed in graphical
views. The hierarchical relationships between systems is displayed in the Visualization View.
Different perspectives can be selected to customize this view. The Workload View shows the
workloads running under servers. Both views show current utilization metrics, allowing you to
easily monitor the operational status of the resources managed by Insight Dynamics.
With Virtualization Manager, you can perform the following tasks:
•Customize the level of detail that you want to see
•Easily access additional Insight Dynamics capabilities to manage and configure systems and
workloads
•Inventory your virtual and physical servers
•Centrally configure your server resources for optimum utilization
Launch Virtualization Manager from HP SIM in any of the following ways:
•From the HP SIM menu bar, choose Tools→Virtualization Manager...
•From the HP SIM Systems and Event Collections list in the left navigation area, choose
Systems→Shared→Systems by Type→All VSE Resources, or expand the All VSE
Resources collection by clicking its icon, then choose a subset such as nPartitions
•Create a custom HP SIM collection whose default view is set to “VSE”, and choose that
collection in the left navigation area
For more information about Virtualization Manager, see the HP Insight Virtualization Manager
6.2 Software with Logical Server Management User Guide, available at http://www.hp.com/go/
insightdynamics/docs.
Logical servers
Alogical server is a set of configuration information that you create, activate and move across
physical and virtual machines. It contains the logical server definition and description, including
the server compute resources (for example, number of CPU cores and amount of memory), and
the server connections to storage fabric and networks.
A logical server is managed within Virtualization Manager and, when activated, is applied to
the creation of a virtual machine using hypervisor-based software or to a bare-metal server blade
using HP Virtual Connect Enterprise Manager. Logical servers can be defined using the Create
Logical Server wizard or created and activated via the import of an existing server blade or
virtual machine.
The Logical Servers feature in Virtualization Manager allows you to perform tasks such as the
following:
6 Introduction to HP Insight Dynamics

•Populate an enclosure
•Load balance servers
•Evacuate servers, for routine maintenance or in case of disaster
NOTE: Logical server management is only supported on a CMS running Microsoft Windows.
For more information about managing logical servers, see the HP Insight Virtualization Manager
6.2 Software with Logical Server Management User Guide, available at http://www.hp.com/go/
insightdynamics/docs.
HP Insight Capacity Advisor software
Capacity Advisor lets you quickly and safely test potentially costly configuration changes in
your data center before you actually make them. To start Capacity Advisor, select
Tools→Capacity Advisor from the top menu bar, or select the Capacity Advisor tab within
Virtualization Manager. With Capacity Advisor, you can find answers to questions such as the
following:
•Is there room on this system for an additional workload?
•Will this workload fit on this system?
•Can I consolidate these servers as virtual machines on a single server?
•What might my resource demand be in six months or a year?
•What are the estimated power costs for cooling a real or simulated system configuration?
•What does a comparison of several what-if scenarios reveal about the analyzed alternatives?
Capacity Advisor helps you optimize workloads across your management domain to help maximize
utilization of server resources. It provides scenario analysis to help you manage your current
server resources and plan for changes to your workloads and resources. These scenarios allow
you to simulate the following actions:
•Resizing systems
•Resizing workloads
•Moving workloads
Capacity Advisor provides the following additional features.
•Automated generation of reports Capacity Advisor automates report generation that would
otherwise take many manual steps to collect and present data or analysis.
•Trace-based simulator Providing graphs over specific data intervals, Capacity Advisor
gives a more complete and accurate view of resource utilization than focusing on a single
peak.
•Ease of data gathering Data is collected automatically using a secure protocol and stored
in a central database for analysis.
For more information about Capacity Advisor, see the HP Insight Capacity Advisor 6.2 User Guide,
available at http://www.hp.com/go/insightdynamics/docs.
HP Insight Capacity Advisor Consolidation software
Capacity Advisor is also available through a limited-duration license for systems that are intended
to be consolidated. The HP Insight Capacity Advisor Consolidation software does not include
Virtualization Manager or any other Insight Dynamics components. Using this software, you
can collect and analyze data to help you plan the consolidation of existing systems, without
requiring a full Insight Dynamics license for those systems. For more information, see the section
“Data collection and the HP Insight Capacity Advisor Consolidation software” in the HP Insight
Capacity Advisor 6.2 User Guide.
Components of HP Insight Dynamics 7

HP Insight Orchestration software
HP Insight Orchestration extends HP Insight Dynamics to provide rapid provisioning and
repurposing of infrastructure services from shared resource pools using a self-service portal.
Insight Orchestration delivers advanced template-driven design, provisioning and on-going
operations for multinode, multi-tier infrastructure services.
HP Insight Orchestration supports four main activities to automate the deployment of
infrastructure services:
Design An architect uses the graphical designer to create simple and complex
infrastructure templates that, when tested, can be published for users to create
infrastructure services.
Provision A self-service user selects an existing template and then requests infrastructure
provisioning from it, against an assigned pool of resources. The administrator
can approve or deny this request, and monitor its progress.
Operate The administrator manages server, network, and storage pools, defines virtual
machine images and software deployment jobs, performs manual provisioning
tasks as part of the fulfillment of self-service requests, and uses Insight software
to monitor the health and utilization of the managed environment.
Integrate Architects and administrators integrate Insight Orchestration with existing IT
processes by modifying or creating Operations Orchestration workflows to
customize the Insight Orchestration automation. They can link to approval
processes, extend operating system deployment and server configuration, and
integrate the SAN management processes with server deployment.
For more information about HP Insight Orchestration software and the related Operations
Orchestration software, see the list of documents under “Related information” (page 29).
HP Insight Recovery software
HP Insight Recovery provides simplified disaster recovery of logical server environments. With
a mouse click, HP Insight Recovery transfers application environments running on HP
BladeSystems or on virtual machines to a remote Recovery Site. It utilizes the data replication
capabilities of HP storage environments to ensure that application data is properly transitioned
to the recovery location and that the overall transition is measured in minutes, not days. Insight
Recovery is only supported on an HP ProLiant CMS running Microsoft Windows.
Logical servers that are included in an HP Insight Recovery configuration are referred to as “DR
protected logical servers”. An HP Insight Recovery configuration consists of two sites, each
managed by HP Insight Dynamics. At any point in time, one site is configured with the primary
role and the other is configured with the recovery role. HP Insight Recovery pairs symmetrically
configured logical servers across the two sites. The DR protected logical servers at the Primary
Site are in an activated state, providing services to the end-user. The peer logical servers at the
Recovery Site are in a deactivated state.
If a disaster occurs at the Primary Site, the administrator at the Recovery Site can trigger a site
failover via a push-button provided by HP Insight Recovery. This will prepare the storage
associated with the DR protected logical servers at the Recovery Site for read-write access, and
then activate the logical servers at the Recovery Site. The site role at the Recovery Site will be
changed to primary.
For more information about HP Insight Recovery software, see the see the list of documents
under “Related information” (page 29).
HP Storage Provisioning Manager
HP Storage Provisioning Manager (SPM) is a software tool that provides a service-centric
management interface to storage, allowing storage requests to be fulfilled with available storage
services from a storage catalog. SPM securely automates storage management tasks.
8 Introduction to HP Insight Dynamics

SPM is automatically installed as part of Insight Dynamics and is accessed through the logical
server management (LSM) feature of Virtualization Manager. SPM must be connected to EVAs
using Command View (CV), storage arrays that are managed by HP Insight Orchestration (HPIO)
using Insight Operations Orchestration or SMI-S, and to unmanaged storage arrays.
For more information about SPM, see the HP Storage Provisioning Manager User Guide, available
at http://www.hp.com/go/insightdynamics/docs.
Application Discovery
Application Discovery helps you identify and learn about the applications and processes running
in your data center or computing network.
With Application Discovery, you can do the following:
•Discover the location and number of recognized, running and installed applications in your
network or data center
•Monitor the activity and resource usage of running processes and applications
•Define and adapt application templates to your environment for better discovery of your
third-party and custom applications, and to make them available for adding to monitored
workloads
•Select the event types for which you want to receive notifications and set their level of
importance
For more information about Application Discovery, see the Application Discovery 6.2 User Guide,
available at http://www.hp.com/go/insightdynamics/docs.
HP Insight Global Workload Manager software for Integrity
To access Global Workload Manager (gWLM) from Virtualization Manager, select the Shared
Resource Domain tab or select one of the items under Tools→Global Workload Manager from
the Insight Dynamics menu bar. Global Workload Manager improves both workload performance
and resource utilization in a shared computing environment. For servers partitioned with
nPartitions, virtual partitions, virtual machines, psets, or FSS groups, gWLM can do the following:
•Monitor each application.
•Determine the CPU resources needed by each application.
•Automatically migrate CPU resources between partitions to where they are needed most.
This migration improves application performance by making more resources available to
the application at times of peak demand. In addition, migrating idle resources to the
applications that are busy increases processor utilization.
For more information about gWLM, see the HP Insight Global Workload Manager 6.2 User Guide,
available at http://www.hp.com/go/insightdynamics/docs.
HP Instant Capacity Manager
The Instant Capacity (iCAP) Manager is a web-based interface that can be used to monitor your
Instant Capacity environment. There are several pages available in iCAP Manager, including a
home page to provide an overview of the Instant Capacity resources available, a Global Instant
Capacity (GiCAP) group manager page to provide more insight into the group managers, and
detail pages for GiCAP groups and iCAP complexes and hosts.
You can get to iCAP Manager in either of the following ways:
•From the Virtualization Manager Visualization tab, click the iCAP technology link associated
with any managed system that has iCAP components, TiCAP capacity, or is a member of a
GiCAP group.
•Select Tools→Instant Capacity Manager from the Insight Dynamics menu bar.
For more information about iCAP Manager, see the iCAP Manager help.
Components of HP Insight Dynamics 9

Partition Manager
Partition Manager provides system administrators with a convenient graphical user interface to
configure and manage nPartitions on HP server systems. Using Partition Manager, you can
perform configuration tasks without having to remember commands and parameters. You select
nPartitions, cells, I/O chassis or other components from the graphical display, then select an
action from a menu.
You can use Partition Manager to perform the following tasks:
•Create, modify and delete nPartitions
•Examine the nPartition configuration of a complex
•Check the complex for potential configuration and hardware problems
•Manage hardware resources on the complex
For more information about Partition Manager, see the Partition Manager help.
Integrity Virtual Machines Manager
HP Integrity Virtual Machines Manager (VM Manager) is the GUI that you can use from your
browser to manage Integrity VM resources. VM Manager allows you to create, configure and
evaluate virtual machines, and monitor and evaluate data and resources at the level of the VM
Host. You can view all of a VM Host's virtual machines and their assigned resources, and you
can view all resources assigned to a specific virtual machine or virtual switch. For example, VM
Manager provides graphical views of virtual-to-physical network and storage devices so that
you can view I/O data, including resource utilization information. VM Manager obtains
information about Integrity VM resources through Web-Based Enterprise Management (WBEM)
providers installed on the VM Host.
For more information about VM Manager, see the HP Integrity Virtual Machines Manager 4.1.1
Software: User Guide, available at http://www.hp.com/go/insightdynamics/docs.
Product configurations
Insight Dynamics is licensed per managed system. Different Insight Dynamics suite licenses are
available for managing different types of systems, as shown in Table 1-1. For more information
about Insight Dynamics licenses, see “License management” (page 15).
10 Introduction to HP Insight Dynamics

Table 1-1 Managed Systems Supported by CMS
CMS platformManaged systems supportedSuite license
•HP ProLiant server running
Microsoft Windows
•HP BladeSystem c-Class ProLiant
server blade running Microsoft
Windows
•Microsoft Windows virtual machine
running under VMware ESX or
Microsoft Hyper-V on HP ProLiant
or selected non-HP host
•HP ProLiant servers running
Microsoft Windows or Linux
•HP BladeSystem c-Class ProLiant
server blades running Microsoft
Windows or Linux
•Virtual machines and VM hosts
running under VMware ESX,
VMware ESXi, or Microsoft
Hyper-V on HP ProLiant hosts
HP Insight Dynamics suite for
ProLiant
•Virtual machines and VM hosts
running under VMware ESX,
VMware ESXi, or Microsoft
Hyper-V on selected non-HP hosts
•Selected non-HP servers running
Microsoft Windows or Linux
HP Insight Dynamics suite for
non-HP servers
•HP ProLiant server running
Microsoft Windows
•HP BladeSystem c-Class ProLiant
server blade running Microsoft
Windows
•Microsoft Windows virtual machine
running under VMware ESX or
Microsoft Hyper-V on HP ProLiant
or selected non-HP host
•HP Integrity server running HP-UX
•HP Integrity server blade running
HP-UX
•HP-UX virtual machine running
under HP Integrity Virtual
Machines
•HP Integrity servers running
HP-UX, HP OpenVMS, Integrity
Linux, or Microsoft Windows for
Integrity
•HP Integrity server blades running
HP-UX, HP OpenVMS, Integrity
Linux, or Microsoft Windows for
Integrity
•nPartitions running HP-UX,
Integrity Linux, or Microsoft
Windows for Integrity
•Virtual machines running under
HP Integrity Virtual Machines
•virtual partitions running under a
vPars monitor.
HP Insight Dynamics -VSE suite for
Integrity
Features of Insight Dynamics
The specific features supported by Insight Dynamics depend on the type of CMS on which the
software is running.
•Table 1-2 (page 12) summarizes the features supported for different types of managed
systems using a CMS running Microsoft Windows.
•Table 1-3 (page 13) summarizes the features supported for different types of managed
systems using a CMS running HP-UX.
Features of Insight Dynamics 11

Table 1-2 Insight Dynamics Features on Windows CMS
Managed systems supportedFeature
•HP ProLiant servers running Microsoft Windows or
Linux
•HP BladeSystem c-Class ProLiant server blades
running Microsoft Windows or Linux
•Virtual machines and VM Hosts running under
VMware ESX, VMware ESXi, or Microsoft Hyper-V
on HP ProLiant and supported non-HP servers
•Selected non-HP servers running Microsoft Windows
or Linux
•HP Integrity servers running HP-UX, Integrity Linux,
or Microsoft Windows for Integrity
•HP Integrity server blades running HP-UX, Integrity
Linux, or Microsoft Windows for Integrity
•Virtual machines running under HP Integrity Virtual
Machines
•virtual partitions running under a vPars monitor.
Visualize and monitor physical and virtual resources and
workloads using HP Insight Virtualization Manager
software
•HP ProLiant servers running Microsoft Windows or
Linux
•HP BladeSystem c-Class ProLiant server blades
running Microsoft Windows or Linux
•Virtual machines and VM Hosts running under
VMware ESX, VMware ESXi, or Microsoft Hyper-V
on HP ProLiant and supported non-HP servers
•Selected non-HP servers running Microsoft Windows
or Linux
•HP Integrity servers running HP-UX, Integrity Linux,
or Microsoft Windows for Integrity
•HP Integrity server blades running HP-UX, Integrity
Linux, or Microsoft Windows for Integrity
•Virtual machines running under HP Integrity Virtual
Machines
•virtual partitions running under a vPars monitor.
•Servers licensed for HP Insight Capacity Advisor
Consolidation software
Perform capacity analysis and planning using HP Insight
Capacity Advisor software
•HP BladeSystem c-Class ProLiant server blades
running Microsoft Windows1
•Virtual machines running Microsoft Windows under
VMware ESX, VMware ESXi, or Microsoft Hyper-V
on HP ProLiant and supported non-HP servers
•HP Integrity server blades running HP-UX, Integrity
Linux, or Microsoft Windows for Integrity 1
•Virtual machines running under HP Integrity Virtual
Machines 2
Visualize and monitor logical servers: server profiles that
can be easily created and freely moved
•HP BladeSystem c-Class ProLiant server blades
running Microsoft Windows1
•Virtual machines running Microsoft Windows under
VMware ESX, VMware ESXi, or Microsoft Hyper-V
on HP ProLiant and supported non-HP servers
•HP Integrity server blades1running HP-UX, Integrity
Linux, or Microsoft Windows for Integrity 3
Provision logical servers using HP Insight Orchestration
software
12 Introduction to HP Insight Dynamics

Table 1-2 Insight Dynamics Features on Windows CMS (continued)
Managed systems supportedFeature
•HP BladeSystem c-Class ProLiant server blades
running Microsoft Windows or Linux1
•Virtual machines running Microsoft Windows or Linux
under VMware ESX or VMware ESXi on HP ProLiant
and supported non-HP servers
•Virtual machines running Microsoft Windows under
Microsoft Hyper-V on HP ProLiant and supported
non-HP servers
Enable site-to-site fault recovery of logical servers using
HP Insight Recovery software
•HP Integrity servers running HP-UX or Integrity Linux
•HP Integrity server blades running HP-UX or Integrity
Linux
•Virtual machines running under HP Integrity Virtual
Machines
•virtual partitions running under a vPars monitor.
Identify and monitor running applications and processes
using Application Discovery
•HP Integrity servers running HP-UX
•HP Integrity server blades running HP-UX
•Virtual machines running under HP Integrity Virtual
Machines
Manage workloads with automated policies using HP
Insight Global Workload Manager software for Integrity
•Virtual machines running under HP Integrity Virtual
Machines
•HP Integrity Virtual Machines VM Hosts
Manage HP Integrity virtual machines using Integrity
Virtual Machines Manager
•HP Integrity cell-based servers and nPartitionsManage nPartitions and cell-based servers using Partition
Manager
•HP Integrity servers with HP Instant Capacity products
installed
Monitor HP Instant Capacity resources (iCAP,GiCAP,
and TiCAP) using HP Instant Capacity Manager
•HP Integrity servers with HP Serviceguard installedManage HP Serviceguard clusters using Serviceguard
Manager
1 Requires HP Virtual Connect Enterprise Manager software on BladeSystem enclosure
2 Logical server operations on virtual machines under HP Integrity Virtual Machines are limited to: import, on-line
guest migration via logical server moves, power on/off, and unmanage.
3 Requires HP Insight Orchestration software for Integrity
Table 1-3 Insight Dynamics Features on an HP-UX CMS
Managed systems supportedFeature
•HP Integrity servers running HP-UX, Integrity Linux,
or Microsoft Windows for Integrity
•HP Integrity server blades running HP-UX, Integrity
Linux, or Microsoft Windows for Integrity
•Virtual machines running under HP Integrity Virtual
Machines
•virtual partitions running under a vPars monitor.
Visualize and monitor physical and virtual resources and
workloads using HP Insight Virtualization Manager
software
•HP Integrity servers running HP-UX, Integrity Linux,
or Microsoft Windows for Integrity
•HP Integrity server blades running HP-UX, Integrity
Linux, or Microsoft Windows for Integrity
•Virtual machines running under HP Integrity Virtual
Machines
•virtual partitions running under a vPars monitor.
Perform capacity analysis and planning using HP Insight
Capacity Advisor software
Features of Insight Dynamics 13

Table 1-3 Insight Dynamics Features on an HP-UX CMS (continued)
Managed systems supportedFeature
•HP Integrity servers running HP-UX, Integrity Linux,
or Microsoft Windows for Integrity
•HP Integrity server blades running HP-UX, Integrity
Linux, or Microsoft Windows for Integrity
•Virtual machines running under HP Integrity Virtual
Machines
•virtual partitions running under a vPars monitor.
Identify and monitor running applications and processes
using Application Discovery
•HP Integrity servers running HP-UX, Integrity Linux,
or Microsoft Windows for Integrity
•HP Integrity server blades running HP-UX, Integrity
Linux, or Microsoft Windows for Integrity
•Virtual machines running under HP Integrity Virtual
Machines
•virtual partitions running under a vPars monitor.
Manage workloads with automated policies using HP
Insight Global Workload Manager software for Integrity
•Virtual machines running under HP Integrity Virtual
Machines
•HP Integrity hosts running HP Integrity Virtual
Machines
Manage HP Integrity virtual machines using Integrity
Virtual Machines Manager
•HP Integrity cell-based servers and nPartitionsManage nPartitions and cell-based servers using Partition
Manager
•HP Integrity servers with HP Instant Capacity products
installed
Monitor HP Instant Capacity resources (iCAP,GiCAP,
and TiCAP) using HP Instant Capacity Manager
•HP Integrity servers with HP Serviceguard installedManage HP Serviceguard clusters using Serviceguard
Manager
14 Introduction to HP Insight Dynamics

2 License management
This chapter describes the licensing model, the types of licenses available for Insight Dynamics,
and how to add and apply licenses. The tables in the following sections summarize the hardware
platforms and operating systems supported for each Insight Dynamics license. For detailed
hardware and software configurations supported by Insight Dynamics, see the HP Insight Software
6.2 Support Matrix, available at http://www.hp.com/go/insightdynamics/docs.
Insight Dynamics licensing model
Insight Dynamics is licensed for use on managed systems as shown in the following table. Licenses
are managed from the Central Management Server (CMS), using the HP SIM License Manager
database.
NOTE: Additional product licenses may be required, depending on the details of your
installation.
License requirement1
System type
License per CPU socket or core2 HP Integrity Server
License per CPU socket or core 2 HP 9000 Server
License per systemHP ProLiant ML/DL Server
No enclosure license required or available. Licenses apply
to individual server blades.
HP BladeSystem c-Class enclosure
License per bladeHP BladeSystem c-Class ProLiant server blade
License per CPU socket or core 2 HP Integrity server blade
Covered by host server licenseVirtual machines running under any of the following:
•HP Integrity Virtual Machines
•VMware ESX
•VMware ESXi
•Microsoft Hyper-V
1 The HP Insight Capacity Advisor Consolidation software license is always licensed per system, regardless of system
type. See “HP Insight Capacity Advisor Consolidation software” (page 18).
2 Trial licenses are licensed per system. See “Trial licenses” (page 15).
To obtain a permanent License To Use (LTU) for Insight Dynamics, contact your HP sales
representative, your HP services representative, or your authorized HP reseller. The available
licenses are listed in the sections that follow.
To use a purchased license, it must be added to the HP SIM License Manager database on the
CMS and then applied to a managed system. For more information, see “Adding and applying
licenses” (page 18).
Trial licenses
When Insight Dynamics is installed on the CMS, 10 trial licenses for the HP Insight Dynamics -
VSE suite for Integrity are included in the License Manager database. These licenses can be
applied to HP Integrity and HP 9000 systems. Each trial license is valid for 90 days after it is
applied to a managed system. To continue to manage these systems beyond the trial period,
permanent licenses must be purchased.
These trial licenses can be applied to managed systems by the Insight managed system setup
wizard or by the vselicense command. They cannot be applied through HP SIM License
Insight Dynamics licensing model 15

Manager. For information about the managed system setup wizard, see the Insight Managed
System Setup Wizard Getting Started Guide. For information about vselicense, see
vselicense(1M) [p. 41].
IMPORTANT: Integrity trial licenses that have already been activated from previous versions
of the software (VSE Management Software 4.*) will not be retained when upgrading to the
current release. Managed systems that were licensed with older Integrity trial licenses will appear
unlicensed after the upgrade. To re-license the system with the new trial license, use the Insight
managed system setup wizard or the vselicense command.
Trial licenses for the HP Insight Dynamics suite for ProLiant for a limited number of managed
systems can be obtained by registering with HP on the Infrastructure software evaluation
download center (http://www.hp.com/go/tryinsightsoftware).
You can view the status of your trial licenses using the HP SIM License Manager. For information
about License Manager, see “Alternative Process: Use HP SIM License Manager” (page 18).
End-user license agreement
Your use of Insight Dynamics is subject to the terms of the end-user license agreement included
with the software. Please read this document at its installed location on the CMS:
HP-UX CMS /opt/vse/src/README
Microsoft Windows CMS installation-directory\src\README
The default installation directory is C:\Program Files\HP\
Virtual Server Environment, but this directory can be
changed at installation time.
HP ProLiant servers and ProLiant server blades
Managed system OSLicensed productsLicense name
•Microsoft Windows
•Linux
•HP Insight Virtualization Manager
software
•HP Insight Capacity Advisor
software
•HP Insight Control server
migration
•HP Insight Orchestration software
•HP Insight Recovery software
HP Insight Dynamics suite for
ProLiant
Notes
•A license for HP Insight Control suite is also required. The Insight Control license includes HP Insight Control
virtual machine management, HP Insight Control server migration, HP Insight Control power management, and
HP Integrated Lights-Out Advanced.
•Logical server management is only supported on a CMS running Microsoft Windows.
•A license for HP Virtual Connect Enterprise Manager software is required for BladeSystem enclosures in order
to manage logical servers on server blades.
16 License management

HP Integrity and HP 9000 servers and Integrity server blades
Managed system OSLicensed productsLicense name
•HP-UX•HP Insight Virtualization Manager
software
•HP Insight Capacity Advisor
software
•HP Insight Global Workload
Manager software for Integrity
•HP Insight Control virtual
machine management
HP Insight Dynamics -VSE suite for
Integrity
•HP-UX
•Microsoft Windows for HP
Integrity
•Linux for HP Integrity
•HP Insight Virtualization Manager
software
•HP Insight Control virtual
machine management
HP Insight Virtualization Manager
software
•HP-UX
•Microsoft Windows for HP
Integrity
•Linux for HP Integrity
•HP Insight Virtualization Manager
software
•HP Insight Capacity Advisor
software
•HP Insight Control virtual
machine management
HP Insight Capacity Advisor software
•HP-UX•HP Insight Virtualization Manager
software
•HP Insight Global Workload
Manager software for Integrity
•HP Insight Control virtual
machine management
HP Insight Global Workload Manager
software for Integrity
Notes
•Logical server management is only supported on a CMS running Microsoft Windows.
•A license for HP Virtual Connect Enterprise Manager software is required for BladeSystem enclosures in order
to manage logical servers on server blades.
•A license for HP Insight Orchestration software for Integrity is included with the HP-UX VSE and DC Operating
Environments.
•A license for Integrity iLO 2 Advanced is recommended in order to collect advanced power information for
Virtualization Manager meters and capacity planning.
Non-HP servers
Managed system OSLicensed productsLicense name
•Microsoft Windows
•Linux
•HP Insight Virtualization Manager
software
•HP Insight Capacity Advisor
software
•HP Insight Control virtual
machine management
•HP Insight Orchestration software
•HP Insight Recovery software
HP Insight Dynamics suite for
non-HP servers
Notes
•Logical server management is only supported on a CMS running Microsoft Windows.
•License for HP Insight Recovery software is included in the suite, but Insight Recovery is not supported on
non-HP servers in this release of Insight Dynamics.
HP Integrity and HP 9000 servers and Integrity server blades 17

HP Insight Capacity Advisor Consolidation software
The HP Insight Capacity Advisor Consolidation software license allows you to collect and analyze
data from systems that are planned to be consolidated. This license is only needed on managed
systems that do not have a license for HP Insight Capacity Advisor software or Insight Dynamics.
Managed systemsLicensed productsLicense name
Servers running HP-UX 11i, Microsoft
Windows for Integrity, x86–based
Microsoft Windows Server, or Linux.
HP Insight Capacity Advisor softwareHP Insight Capacity Advisor
Consolidation software
Notes
•License is valid for six months after it is assigned to a system.
•Does not include license for HP Insight Virtualization Manager software. Systems with only this license will not
be visible in Virtualization Manager.
Adding and applying licenses
To use a purchased license, you must first add it to the HP SIM License Manager database on
the CMS, then apply the license to a specific managed system. The CMS keeps track of how many
of each type of license are available to be applied to managed systems. As you apply licenses,
the number of available licenses decreases.
NOTE: Unlicensed systems will not be displayed by HP Insight Virtualization Manager software.
At startup, Virtualization Manager displays an alert in the toolbar if there are unlicensed systems.
Clicking this alert displays the following text:
The following systems were ignored by Virtualization
Manager because they are not licensed or have an
expired license …
The licensing status of Virtual machines that are no longer associated with their VM Host cannot
be determined by Insight Dynamics. In this case, the following message is displayed:
The licensing status for the following Virtual Machines
could not be determined because they are not associated with
a VM host. They will be ignored by Virtualization Manager …
To add and apply licenses, you must have administrative rights on the CMS and you must be
authorized for the All Tools toolbox on the managed systems that you want to license. To
assign administrative rights to an HP SIM user, select the Users tab under
Options→Security→Users and Authorizations... and enable the “Configure CMS Security”
option. To authorize users for toolboxes, use the Authorizations tab under
Options→Security→Users and Authorizations....
Recommended Process: Use the managed system setup wizard
HP recommends using the Insight managed system setup wizard to add and apply licenses for
Insight Dynamics. To start the managed system setup wizard, select Configure→Managed
System Setup Wizard... from the HP SIM top menu. Help is available in each step of the wizard.
For more information about the managed system setup wizard, see the Insight Managed System
Setup Wizard Getting Started Guide.
Alternative Process: Use HP SIM License Manager
If you choose not to use the managed system setup wizard, you can use HP SIM License Manager
to add and apply most types of licenses. You can also use License Manager to view the available
18 License management

and applied licenses for all products in the HP SIM License Manager database. To use HP SIM
License Manager, you must have administrative rights on the CMS.
Some licenses cannot be applied through License Manager:
•Trial licenses can only be applied to managed systems by the Insight managed system setup
wizard or by the vselicense command. For information about vselicense, see
vselicense(1M) [p. 41].
•LTUs from earlier versions of the VSE Management Software for Integrity or from the HP-UX
VSE or DC Operating Environments are managed using the vselicense command or the
“Scan for HP-UX Licenses” tool. For more information, see “Scan for HP-UX licenses”
(page 19).
To start License Manager, select Deploy→License Manager... from the HP SIM menu. This
menu selection will only be available if you have administrative rights on the CMS. Online help
is available to guide you through the use of License Manager.
The “Deploy: HP Insight Dynamics -VSE suite for Integrity Licenses” screen performs the final
step of assigning or un-assigning licenses for Insight Dynamics to Integrity managed systems.
This screen is not used to apply licenses for the HP Insight Capacity Advisor Consolidation
software, the HP Insight Dynamics suite for ProLiant, or the HP Insight Dynamics suite for
non-HP servers. Online help is available to guide you in using this screen.
For systems that will be managed by a CMS running Microsoft Windows, applying licenses in
the proper order will simplify the process and reduce errors. Apply licenses to each managed
system in the order shown for each system type:
HP BladeSystem c-Class ProLiant
blades
HP iLO Advanced1.
2. VCEM (enclosure license required for logical server
management of server blades)
3. Insight Control
4. Insight Dynamics
HP ProLiant ML/DL servers HP iLO Advanced1.
2. Insight Control
3. Insight Dynamics
HP BladeSystem c-Class Integrity
Blades
VCEM (enclosure license required for logical server
management of server blades)
1.
2. Insight Dynamics
Scan for HP-UX licenses
Use the “Scan for HP-UX Licenses” task to perform the following functions:
•Enable the HP Insight Dynamics -VSE suite for Integrity licenses that are included in the
HP-UX Operating Environments.
•Migrate unused licenses that were purchased for release 3.xor earlier of the VSE Management
Software to the HP SIM License Manager database and apply them to your managed systems
(if permitted by your licensing agreement with HP).
To launch the task, click Scan for HP-UX Licenses... on the “Deploy: HP Insight Dynamics –
VSE suite for Integrity Licenses” screen. On the “Task Confirmation” screen, click Run Now.
Online help is available to guide you through the operation. This task scans for licenses for any
VSE Management Software for Integrity LTU that is installed on the managed systems. It is not
restricted to the type of license that was originally selected in License Manager. It will only
discover licenses on HP-UX systems, even if other types of systems were included in the License
Manager system selection. For more information about scanning for HP-UX licenses and migrating
unused licenses from earlier software versions, see vselicense(1M) [p. 41].
Scan for HP-UX licenses 19

License requirements for systems with HP Instant Capacity products
For systems using HP Instant Capacity products (including iCAP,GiCAP, and TiCAP), the total
number of licenses assigned across all nPartitions within the complex (or across multiple complexes
when using GiCAP) must be equal to or greater than the total number of processors that you
have purchased.
20 License management