HP xw3400 - Workstation User manual

Pantone
Black
Layers
Supporting images
Fonts: type1
Pantone Colors:
Colors
Revisions, approved, date:
HP confidential:
This document contains confidential,
proprietary information that is ( HP )
Hewlett-Packard property.
Do not disclose to or duplicate
for others except as authorized by
Hewlett-Packard
Drawn by
Marketing
NPI/PIM Coordinator
Regulatory
Environmental
Date
Date
IND design Date
MNFR ENG Date
Part number
Description
File name
System
Drawing number
1. Guidelines
2. Dimensions
3. Information
4. Languages
5. Titles
6. you+hp or
7. +hp
8. Photo or
9. Illustration
10. HP artwork
11. OOV grid
12. Notes
Blue 640 is setup as CMYK (and
not a spot color) because there's
a photo & CMYK is already a
requirement.
379255-001
Pantone
PMS 640 cv
The HP One Voice brand standards are defined at: http://h30060.www3.hp.com/onevoice/
Artwork fonts:
HP Futura Book
Product name = 14-24 pt.
Descriptor = 10-14 pt.
Languages = 6-12 pt.
Information text = 6-10 pt.
Notes:
Arial
Arial Bold
HP Remote Graphics Software
Installation Guide

Page 1
HP Remote Graphics Software Receiver and Sender
This document provides a quick overview of installing both the Receiver and Sender
Modules for each of the supported platforms (Microsoft® Windows®, Linux, and
HP-UX). For detailed instructions, refer to the online documentation provided on the
Module CDs.
•“Windows” on page 2
•“Linux” on page 4
•“HP-UX (PA-RISC)” on page 6

Page 2
Windows
Installing the Receiver Module
Installation of the HP Remote Graphics Receiver for Windows is required on all systems
that will be connecting to the HP Remote Graphics Sender. To begin the installation:
1. Insert the HP Remote Graphics Software CD and change to the directory
win32\receiver on your CD-ROM drive.
2. Double-click or select Setup.exe to start the installer.
3. Follow the instructions on the screen.
Installing the Sender Module
The installation of the HP Remote Graphics Sender Module involves installing the HP
Remote Graphics Sender and Driver. To install:
1. Insert the HP Remote Graphics Software CD and change to the directory
win32\sender on your CD-ROM drive.
2. Double-click or select Setup.exe to start the installer.
3. Follow the instructions on the screen.
4. You will be prompted to restart the system after the installation is complete. Select
yes when asked to restart the system.

Page 3
NOTE: To enable remote viewing of OpenGL applications, the HP Remote Graphics
opengl32.dll library must be copied into the same directory as the OpenGL application
executable.
For example, if you want to enable remote viewing for the 3-D OpenGL application
"foo3d.exe" and the executable is installed in the directory "C:\Program Files\foo3d,"
manually copy the HP Remote Graphics opengl32.dll from "C:\Program
Files\Hewlett-Packard\Remote Graphics Sender\" to "C:\Program Files\foo3d." This
must be done before the application "foo3d.exe" is started.
If the opengl32.dll file is not copied to the correct location, the Remote Graphics Sender
will not be notified of OpenGL screen updates and the OpenGL application window
will appear black on the Receiver.
The DirectX API is not supported.

Page 4
Linux
Installing the Receiver Module
Installation of the HP Remote Graphics Receiver for Linux is required on all systems that
will be connecting to the HP Remote Graphics Sender. To install:
1. Login as root.
2. Insert the HP Remote Graphics Software CD and mount the CD, if it is not
automatically mounted.
3. Go to the mount point of the CD, which is usually /mnt/cdrom, and change
directories to lin32/receiver.
4. Execute the following command:
./install.sh
5. The Receiver will be installed into /opt/hpremote/rgreceiver. To start the Receiver,
execute the following command:
/opt/hpremote/rgreceiver/rgreceiver.sh
6. Optionally, add the directory /opt/hpremote/rgreceiver to your PATH environment
variable.
Installing the Sender Module
1. Login as root.
2. Insert the HP Remote Graphics Software CD and mount the CD, if it is not
automatically mounted.
3. Go to the mount point of the CD, which is usually /mnt/cdrom, and change
directories to lin32/sender.
4. Execute the following command:
./install.sh
5. The Sender will be installed into /opt/hpremote/rgsender.

Page 5
6. Add the "rge" extension to the XF86Config file. Edit the file /etc/X11/XF86Config,
/etc/X11/XF86Config-4 or the appropriate XF86Config file on your system.
Depending on the X Server version, this file could be different. In the Modules
section of this file, add the following line:
Load "rge"
The Module section should read as follows:
Section "Module"
...
Load "rge"
....
EndSection
7. The Sender will be installed into /opt/hpremote/rgsender and will be started
automatically when the X Server or system is restarted, provided the appropriate
XF86Config file was correctly modified.
8. The Linux Sender uses the Pluggable Authentication Module (PAM) for
authentication. Add the following lines to the files /etc/pam.d/gdm,
/etc/pam.d/kde, and /etc/pam.d/xdm:
session optional pam_rg.so
NOTE: If you are using the nVidia drivers, Version 1.0-5336 and beyond should be
used.
nVidia drivers have a defect. As a result the "NoFlip" option should be enabled in the
XF86Config file.
Section "Device"
Option "NoFlip" "on"
EndSection

Page 6
HP-UX (PA-RISC)
Installing the Receiver Module
Installation of the HP Remote Graphics Receiver for HP-UX is required on all systems that
will be connecting to the HP Remote Graphics Sender. To install:
1. Login as root.
2. Insert the HP Remote Graphics Software CD and mount the CD.
3. Go to the mount point of the CD, which is usually /mnt/cdrom, and change
directories to hpux-pa/receiver.
4. Execute the following command:
./install.sh
5. The Receiver will be installed into /opt/hpremote/rgreceiver. To start the Receiver,
execute the following command:
/opt/hpremote/rgreceiver/rgreceiver.sh
6. Optionally, add the directory /opt/hpremote/rgreceiver to your PATH environment
variable.
Installing the Sender Module
1. Login as root.
2. Insert the HP Remote Graphics Software CD and mount the CD.
3. Go to the mount point of the CD, which is usually /mnt/cdrom, and change
directories to hpux-pa/sender.
4. Execute the following command:
./install.sh
5. The Sender will be installed into /opt/hpremote/rgsender and will be started
automatically when the X Server or system is restarted.

Page 7
6. The HP-UX Sender uses the Pluggable Authentication Module (PAM) for
authentication. Add the following lines to the file /etc/pam.conf:
gdm session optional /usr/lib/security/libpam_rg.1
dtlogin session optional /usr/lib/security/libpam_rg.1
NOTE: The system must contain the December 2002 or newer X server patches. HP-UX
11.0 requires X server patch PHSS_26637 or newer. HP-UX 11.11 requires X server
patch PHSS_26638 or newer.
The system must also contain the September 2004 OpenGL patch (PHSS_30882) or
newer for proper 3D OpenGL operation.
HP Remote Graphics Software is not supported on the HP-UX 10.20 operating system.

Page 8

Pantone
Black
Layers
Supporting images
Fonts: type1
Pantone Colors:
Colors
Revisions, approved, date:
HP confidential:
This document contains confidential,
proprietary information that is ( HP )
Hewlett-Packard property.
Do Not disclose to or duplicate
for others except as authorized by
Hewlett-Packard
Drawn by
Marketing
NPI/PIM coordinator
Regulatory
Environmental
Date
Date
IND design Date
MNFR ENG Date
Part number
Description
File name
System
Drawing number
1. Guidelines
2. Dimensions
3. Boilerplate
4a. Barcode 6-3 or
4b. Barcode HP
5. HP artwork
6. OOV grid
7. Notes
The blue is setup in CMYK, since
the cover is CMYK (and the blue
on the cover is also CMYK)
379255-002
Back Cover
Pantone
PMS 640 CMYK
Artwork Fonts:
HP Futura Book
Information text = 6-10 pt.
Copyright Info = 6-8 pt.
Barcode HP =
Code39OneRedA,
18 pt., single line
Barcode, 6-3 =
Code 39, w-1.5 in./h-0.5 in.
Arial, 12 Pt. left justified
Notes: Arial, Arial Bold
The HP One Voice brand standards are defined at: http://h30060.www3.hp.com/onevoice/
379255-002
Confidential computer software. Valid license from HP required for possession, use
or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer
Software, Computer Software Documentation, and Technical Data for Commercial
Items are licensed to the U.S. Government under vendor’s standard commercial
license.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for technical
or editorial errors or omissions contained herein.
Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.
Linux is a registered trademarks of Linus Torvalds.
Printed on at least 50% total recycled fiber
with at least 10% post-consumer paper
© 2004-2005 Hewlett-Packard Development Company, L.P.
Printed in the US
www.hp.com