HPRT TP80C User manual
Quick Start Guide
TP80C
Packing List
Power Adapter Power Cord
Printer USB Cable
Front View
Inside View
Quick Start Guide
Roll Paper
Cover
Opening
Xiamen Hanin Electronic Technology Co.,Ltd
TEL:
WEB:
+86-(0)592-5885991
www.hprt.com
Back View
Power Supply Interface
Cash Drawer InterfaceUSB Interface Serial Interface
Ethernet Interface
Error Indicator
Power Indicator
Platen
Serial Cable
Printer Cover
CD
(varies by region)
Appearance and components Paper Loading
3. Pull out some paper, and close the printer cover.
！Notes:
1. The items in the package depend on the actual order.
2. Follow the link
User Manual, Windows Drivers and other items.
Standard Accessories
Op�onal Accessories
Interface
1. Connect power adapter to printer.
2. Connect power adapter to power cord.
3. Plug the other side of power cord into the socket outlet.
Power Supply
1
2
3
Power Cord
Power Adapter
Note: The power cord varies by region.
Cau�on:
This is a Class A product. In a domes�c environment this product may cause
radio interference in which the user may be required to take adequate measures.
！
FCC WARNING
This device complies with part 15 of the FCC Rules. Opera�on
is subject to the following two condi�ons: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired opera�on.
Any changes or modifica�ons not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protec�on against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruc�on manual, may cause harmful interference to radio
communica�ons. Opera�on of this equipment in a residen�al
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
-- Reorient or relocate the receiving antenna.
-- Increase the separa�on between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
To maintain compliance with FCC’s RF Exposure guidelines,
This equipment should be installed and operated with
minimum distance between 20cm the radiator your body:
Use only the supplied antenna.
CE DECLARATION OF CONFORMITY
Manufacturer cer�fies that the following designated product:
HPRT TP80C
Type of product:
Direct Thermal Line Prin�ng
It is in conformity with the standards.
Under the Council Direc�ve: (LVD) Direc�ve 2014/35/EU rela�ng to
electrical equipment designed for use within Low Voltage Direc�ve.
EN 62368-1:2014+A11:2017
Under the Council Direc�ve: (EMC) Direc�ve 2014/30/EU rela�ng to
Electro Magne�c Compa�bility.
EN 55032: 2015+AC:2016
EN 55035: 2017
EN 61000-3-2: 2014
EN 61000-3-3: 2013
We declare herewith that as a result of the manner in which the
device designated above was designed, the type of construc�on and
the devices which, as a result have been brought on to the general
market comply with the relevant fundamental regula�ons of the CE
Rules for Safety. And we declare herewith the above men�oned
model is conformity with Direc�ve 2014/30/EU and 2014/35/EU.
In the event of any altera�on which has not been approved by us
being made to any device as designated above, this statement shall
thereby be made invalid.
The declara�on is sole responsibility of the manufacturer HPRT.
Test Standard Informa�on
Other manuals for TP80C
1
Other HPRT Label Maker manuals
