HTD BRX Series User manual

Install these brackets between studs or joists before the drywall goes up during new construction or a major renovation.
While not required for most in-wall and in-ceiling speakers, these pre-construction brackets provide a template for the dry-
wall installer to quickly and accurately cut the hole for you. These brackets were custom designed to t our HDX and SDX
in-ceiling and in-wall speaker lines. They may also work with other brands but check the dimensions carefully before using!
BRX Speaker Brackets
Installation Guide
Incorrect Cut
Correct Cut Correct Cut
STEP 1 STEP 2
STEP 3
STEP 4
Snap wings into place.
Excess wings should be
snapped off to prevent rattling
against back of drywall.
Long wings allow variable placement between studs posi-
tioned up to 24” apart. If using a power tool, be careful not
to over-torque and crack the plastic. Nails are not recom-
mended.
Installed correctly
If you can read this text,
the bracket is facing the
wrong way.
Screws not
included
XXXX
XX

Model BRX-R65
Fits:
Fits: Fits:
HDX-R65
HDX-W65 HDX-W80
HDX-R80
SDX-R65
SDX-W65 SDX-W80
SDX-R80
SDX-S65 HDX-R65AIM
Fits:
Model BRX-W65
Model BRX-R80
Model BRX-W80
8” 911/16”
711/16” 913/16”
103/4” 127/8”
Home Theater Direct, Inc.
www.htd.com
Expert Support:
972-312-9900
Toll free: 866-HTD-AUDIO (483-2834)
[email protected]