Huawei O2 4G Pocket Hotspot Plus Mobile WiFi Pro User manual

Quick Start

1
Thank you for purchasing the O2 4G Pocket Hotspot Plus
Mobile WiFi Pro (Mobile WiFi for short). Mobile WiFi
allows you to connect to high speed mobile broadband
from any Wi-Fi capable device.
This document will help you understand your Mobile WiFi so you can start using it right away.
Please read this document carefully before using your Mobile WiFi.
For detailed information about the functions and configurations of the Mobile WiFi, refer to
the online help on the web management page that comes with the Mobile WiFi.
For detailed instructions for logging in to the web management page, refer to "Logging In to
the Web Management Page."

2
Getting to Know Your Mobile WiFi
Note:
The Mobile WiFi function descriptions and illustrations in this document are for your
reference only. The product you have purchased may vary.
Application Scenarios
Wi-Fi devices (such as smartphones, tablet computers, and game consoles) or computers can
all access the Internet through the Mobile WiFi. The specific connection procedure depends on
the operating system of the Wi-Fi device or computer. Establish a connection according to your
device's specific instructions.

3
Scenario 1: Accessing the Internet Using an 4G, 3G, or 2G Network
The Mobile WiFi uses your operator's 4G, 3G, or 2G network to access the Internet.
4G/3G/2G

4
Scenario 2: Accessing the Internet Using Ethernet (WAN)
Connect the Mobile WiFi's network port to an Ethernet port using a network cable. You can
then access the Internet via Ethernet, such as a home ADSL, hotel DHCP, or campus static IP
broadband network.
Ethernet

5
Scenario 3: Accessing the Internet Using a Wi-Fi Network
The Mobile WiFi supports the Wi-Fi extender function. When you use the Mobile WiFi in Wi-Fi
coverage areas, for example, an airport, cafe, hotel, or your home, your Mobile WiFi will
connect to known Wi-Fi hotspots, helping you save mobile data usage. For details about
adding Wi-Fi hotspots, see "Adding a Wi-Fi Hotspot."
WLAN

6
Appearance
6
3
5
2
1
4
78
Screen Power button
Lanyard hole Charging port
WPS button Micro USB port
Slot cover Ethernet port

7
Screen
Roaming
R: Data roaming turned on.
Signal strength
: Signal strength from weak to strong.
Network type
4G/3G/2G: Connected to an 4G/3G/2G network.
: Connected to WLAN.
: Connected to Ethernet.
Data connection status
Battery
SMS
New messages.
Number of new messages.
4G
R
1
0 B/2GB
1
2
3
4
5
7
6
8
100%
1

8
Wi-Fi
Wi-Fi turned on.
Number of connected Wi-Fi devices.
Traffic statistics
Data usage this month.
Monthly data usage limit.
Note:
To set the start date of the monthly data usage statistics and data usage limit, go to
the HUAWEI HiLink APP or the web management page.
Data traffic information is for your reference only. For more accurate data traffic
information, please consult your service provider.

9
SSID and Wireless Network Encryption Key
When a Wi-Fi device establishes a connection to the Mobile WiFi for the first time, you may
need to enter the default Service Set Identifier (SSID) and wireless network encryption key.
The default SSID and encryption key are printed on the Mobile WiFi label.
It is recommended that you change your SSID and wireless network encryption key the first
time you log in to the web management page.
Pressing will display the current SSID and wireless network encryption key on the
screen.

10
Getting Started
Installing
Install the SIM card and microSD card according to the illustration.
123
Note:
Do not remove the SIM/microSD card when it is in use. Doing so will affect the
performance of your Mobile WiFi and data stored on the SIM/microSD card may be
lost.
The microSD card is an optional accessory. If no microSD card is included in the
package, please purchase one separately.

11
Charging the Battery
The device has a built-in, non-removable battery. Do not attempt to remove the battery;
otherwise the device may be damaged. To replace the battery, take the device to an authorized
service center.
If the Mobile WiFi has not been used for a long time or if the battery is fully depleted, the
Mobile WiFi may not power on immediately after the charger is plugged in. Please charge the
battery for a while before attempting to power on the Mobile WiFi.
Method 1: Use the charger to charge the device
Note:
Only use recommended chargers compatible
with the Mobile WiFi and provided by a
designated manufacturer. Use of an
incompatible charger or one from an unknown
manufacturer may cause the Mobile WiFi to
malfunction, fail, or could even cause a fire.
Such use voids all warranties, whether expressed or implied, on the product.

12
The charger is an optional accessory. If it is not included in the package, you may
contact an authorized dealer to buy a charger compatible with the Mobile WiFi.
The Mobile WiFi's charger model is HW-050200XYW. X and Y represent letters or
numbers that vary by region. For details about the specific charger model, contact an
authorized dealer.
Method 2: Charge the device through a computer connection
Use the data cable provided with your device to connect the Mobile WiFi to the computer.

13
Charging Other Devices Using a USB Cable
The Mobile WiFi can work as a portable power supply (rated output: 5 V, 2 A) for other devices,
such as phones, tablets, music players, and Bluetooth headsets. You can charge those devices
by simply connecting them to the Mobile WiFi using a USB cable. Charging is generally not
affected by the power status of the Mobile WiFi, although some devices can be charged only
when the Mobile WiFi is on.
Note:
Do not connect both connectors of a
data cable to the Mobile WiFi.
If the Mobile WiFi is overheating or
its own battery level is low, it will
stop charging other devices.

14
Charging Other Devices Using the Charging Sling
You can also charge other devices by simply connecting them to the Mobile WiFi using the
charging sling. The devices can be charged only when the Mobile WiFi is on.
HUAWEI
HUAWEI
Note:
The charging sling is intended as a carrying device only. Do not be tempted to swing the
device around using it.

15
Attaching the Charging Sling
1. Thread the charging sling through the lanyard hole. Use tweezers or other tools to pull it
through.
2. Wrap the charging sling around the groove at the top of the lanyard hole and pull tight.
HUAWEI
Note:
For other tools, common household tools may be used to assist.

16
Removing the Charging Sling
1. Push the charging sling in the direction of the arrow shown in the following figure until it
becomes loose.
2. Remove the charging sling.
HUAWEI

17
Turning On the Mobile WiFi
Press and hold the button until the screen lights up, indicating that the Mobile WiFi is
turned on.
Note:
Press and hold the button to turn off the Mobile WiFi.
If the Mobile WiFi is malfunctioning, forcibly restart it by pressing and holding the
button for 14 seconds.

18
Verifying the PIN
If the Mobile WiFi's network parameters have been correctly configured but you cannot access
the Internet after powering it on, PIN verification may be enabled. Log in to the web
management page and enter the PIN when prompted. To avoid entering the PIN every time
you power on the Mobile WiFi, disable PIN verification from the web management page.
The PIN/PUK is delivered with your SIM card. For more details, contact your service provider.