HUBITOOLS HU23079 User manual

Two Way Articulation Probe
User Manual

User Guide
3
First Time Use
Step 1: Remove the battery cover.
Step 2: Place battery in correctly, put the battery cover back on.
Step 3: Insert probe onto the device connector and tighten it up
clockwise.

User Guide
4
2010/09/22 12:35:45
Step 4: Insert SD memory card correctly, then screen will shows
memory card capacity.
Step 5: Hold down the device switch until the screen displays.
Step 6: After the device turns ON, aim the probe front end at an
area to be snapped or recorded. Press down the snap or
record button to make the image into an image or video le.
2010/09/22 12:35:45
System Mode
This device offers 3 easy-to-operate modes: “Preview”, “Browse”
and “Menu ”.
-Preview: Once the device turns ON, “Preview” mode is activated.
Images received by the device are shown on the screen real-time.
Under the “Preview” mode, the user may retrieve pictures or record.
Step5 Step6

User Guide
5
-Browse: Under “Browse” mode, the user may view recorded
pictures and video and conduct basic le management.
-Menu: Under “Menu” mode, the user may change device settings.
Note: Under the “Menu” mode, the system will automatically return
to the “Preview”mode if no action is made.
Multifunction Key
Key Preview Browse Menu
Increase brightness Right N/A
Decrease brightness Left N/A
Enter “Menu” mode Delete Execute conrm
instruction
Zoom-in Up Up
Mirror Down Down
Enter “Browse” mode Return to “Preview”
mode
Return to “Preview”
mode
Snapshot Play lm / Pause N/A
Record video N/A N/A

User Guide
6
2010/09/22 12:35:45
System time
Battery power
Memory card capacity
Screen
System menu
Step 1: Press to enter the Menu mode.
Step 2: Press the button or to
choose the item you need.
Step 3: Press to enter it.
Instructions which can be executed on the
menu are listed as follows:
MAIN MENU
AUTO POWER OFF
DELETE ALL FILES
AV OUTPUT
Delete All Files
After initiating this command, select "yes" or "no" by pressing
or buttons. To delete all, selete "yes". Exit by pressing the
button.

User Guide
7
Date / Time
The user may set system time through this instruction.
-Format: Set sequence of day, month,
year.
-Display: Set if time is to be shown on
Preview mode.
-Setting: Set the device’s time.
SETTINGS
2010/09/22 12:35:45
2010
AV Output
This command will send the video signal out through the AV port.
The screen of the device will turn black until you execute this
command again.
Step 1: Press or button to choose day, month or year to be
changed.
Step 2: Press the button or to adjust gures.
Language
The user may choose any language he or she needs in this option.
TV System
Set video format, NTSC or PAL.
Auto Power Off
Use this function to setting auto power off in 5, 10, 15 or 30 minutes,
then you can disable the auto power off function by selecting “off”.

User Guide
8
Operating Guide
Zoom-in & Mirror
-Zoom-in: Press to enlarge the image, press again to enlarge
more, and press it again to the default image setting.
* Default image
*Default image *Activated
* enlarged 3X
-Mirror: Press to mirror the image, and press it again to the
default image setting.
Adjust the brightness
When the camera's light is too bright (it might be because the lens
is too close to the target), the subjects on the screen may appear
"fully-blank". In this case, please use the dimmer by using the
button. On the other hand, if you wish to have more light, use the
button.
* enlarged 5X

User Guide
9
Taking Photos
Press button during Preview mode to
take the photo. If the bottom of the screen
displays the file name, then your file is
properly saved.
2010/09/22 12:35:45
PICT0000.JPG
Video Recording
Press button during Preview mode
to record the video. In the recording
process, the recording time is displayed
on the screen. If the bottom of the screen
displays the file name, then your file is
properly saved.
Viewing photos/videos
Step 1: Press to enter the Browse mode.
Step 2: Press or to view the oldest or second to last photo /
video.
Step 3: Press to delete a le, then press again to conrm or
press to cancel.
Step 4: Press to play a lm.
2010/09/22 12:35:45
00:00:12

User Guide
10
Specication
Main System
System Dimension 140mm x 116mm x 42mm
System Weight 300g (w/o battery)
Display 3.5” TFT LCD QVGA
Display Resolution 320X240
Power AA x 4 (Alkaline or Ni-HM)
Battery life 4hours
Recording Medium SD CARD (Support to 32G)
Video Out Format NTSC & PAL
Interface AV out
File Format AVI, JPEG
Video Resolution 640x480,30FPS
Image Resolution 640X480
Exposure Automatic
White Balance Fix
Language English, French, German, Italian,
Spanish, Portuguese, Dutch, Danish,
Polish, Russian, Bulgarian, Turkish,
Swedish, Finnish, Norwegian,
Romanian, Greek, Estonian, Lithuanian,
Latvian, Hungarian, Czech, Slovak,
Slovenian, Traditional Chinese,
Simplied Chinese, Japanese
Working Temperature 0ºC~60 ºC
Storage Temperature -20ºC~60 ºC

User Guide
11
Cautions for Use
-To avoid danger, do not put the insert tube into any ammable liquid
or gas. Oil Pass: Leadless Gasoline, Machine Oil, Diesel, Brake Oil
(DOT 4), Transmission Oil, Neutral Cleanser.
-Do not use this product in a fuel tank or other dangerous
environment such as a gasoline or alcohol storage tank.
-The insert tube contains a series of small wires that control the
optics and electronics of the camera tip. To ensure long-term
reliability, do not bend the insert tube more than 180 degrees, and
always bend the insert tube in as large an arc as possible during
usage and storage.
-Do not remove the SD card when capturing photos or videos. This
can cause a loss of the image or video and may damage the SD
card.
-Video recording requires an SD card with fast writing speed.
-This product is designed for industrial use only. Do not use the
system for human or any other biological inspection.
-Do not try to disassemble the product. This presents a short-circuit
risk and could damage the unit.
-Please use only recommended components or accessories.
Unapproved accessories and components may cause damage.
-This product is designed for industrial use only. Do not use the
system for human or any other biological inspection.

User Guide
12
-Avoid direct exposure to sunlight for long period of time. Store the
system in a cool, dry and well-ventilated place.
-Always remove the battery before long-term not using.
-Camera lens cleaning: The user may clean the camera lens with a
cotton swab and small amount of soft grease remover. Do not use
any corrosive liquid for cleaning, such as alcohol or thinner.

User Guide
13
The USB port provides both card reader and DC-
in power function.
1. Card reader function (mass storage mode):
While USB cable is connected to PC, the screen will show
MASS STORAGE MODE (while SD card is correctly inserted),
you can access the image/video data from the SD card.
Note: You can only process the images data in SD card, other
operations are not allowed.

User Guide
14
2. DC-in mode power function
You can activate DC-in power by plugging in the power
adaptor. After the power adaptor is plugged-in, the system will
show up MASS STORAGE MODE, you can press “esc” button
to live view and continue the inspection.
Note: You don’t need to remove batteries inside the system
while DC-in mode is on. When you unplug the DC power, the
system will automatically switch to battery power.

4
10 1
3
2
49
5
6
7
8
Product outlook

5
10 1
3
2
49
5
6
7
8
1. Probe - To guide camera head to inspection area.
2. Bending Neck - To bend camera to change view angle.
3. Camera Head - Lighting and image capture.
4. Control Wheel - To adjust bending neck angle.
5. Control Wheel shaft lock - To lock bending neck angle.
6. Boost button - To enhance brightness for dark
environment inspection.
7. Image rotation button - Four 90° image rotations to
identify codes.
8. Lock - To lock up button functions.
9. Connecting Cable
10. Connector

6
Getting started
Step1: Connect Articulation probe to main system with
align dot then tighten the screw nut.
Step2: Turn on the system until the image is displayed.
Step3: After the system is turned on, you can start your
inspection.

7
LOCK
Operations
Articulation
Rotate the control wheel clockwise to bend tip right, counter
clockwise to bend left.
Lock
To x bending neck angle, just switch the lock shaft
clockwise to the lock position.

8
Function buttons
Boost button
* live image * boost
Image rotation button

9
Specifications
4.5mm Two Way Articulation Probe
*The maximum articulation angle may degrade due to the bending loops of tube.
Probe head diameter 4.5mm
Probe head length 13mm
Probe length 1.5m, 3m
Articulation angle right-left 180°(*)
Probe head material Stainless steel
Probe material Outer braided Stainless steel
Light source 5 x white LEDs
FOV 90°
DOF 1cm~10cm
Button Boost, image rotation
Working temperature -10°C~60°C
Storage temperature -10°C~60°C
Resolution 640x480
Applicable systems F series