Hudson BARCELONA 5056272006559 User manual

1A
Component List
Label Picture Description Qty
BLeg 2
C1
Page 2
* Save all packing until finished.
*Read Instructions, cover to cover.
*Have 2 adults on hand for assembly.
Assembly Prep
Before Beginning:
Cabinet Body
Marble Top
Allen Bolt 6 x 45 mm 4
H2
H1
PictureLabel Qty
Description
Hardware List
T1
PictureLabel
Tool List
Qty
1
Description
Allen Key 4mm
Allen Bolt 6 x 30 mm 4
H3 Washer 25x8mm 4

Unpack the Mable Top (C) from box. Open both doors of
media cabinet and with the help of two person lift the
Marble Top (C) and align it on the top frame of Cabinet
(A) from the back as shown above. Slide the Marble Top
(C) until it meets the back frame. Hold the front edge of
Marble Top (C) with one hand and place the other hand
under the Marble Top (C) as shown. Place Marble Top (C)
gently inside the frame. Adjust Marble Top (C) to
maintain equal gap from Cabinet Body (A).
C
Place Cabinet Body (A) upside down on a non-damaging padded surface. To attach Legs (B),
align holes of Leg (B) with Cabinet Body (A) as shown above, Insert Allen Bolt (H1) and
tighten it with Allen Key (T1) . Follow the same process to attach other Leg.Turn the piece
in upright position.
Careful extremely heavy product.
H1
Assembly Steps
A
Step 1
A
B
B
T1
H1
Page 3
(A+B)
Note : - If Marble Top is not inserted carefully, it may damage product surface.
Step 2

A
C
Product assembly is now complete and product is ready to use.
Assembly Steps
Step 3
Page 4
Assembled View
H3
H2
T1
Align the holes on to the top frame of Cabinet and holes underside of Marble top (C) and
secure using 4 Allen bolt (H2) and 4 Washer (H3) and fully tighten using Allen key (T1).