Huion Store is where you can get the latest information about the product such as its FAQ or
sales promotion. In addition, you can also purchase Huion’s other products or accessories
here.
4. Add Programs
1. Some programs which have already been opened will appear for you to choose from after
clicking Add a Program on the screen. For more programs, click Browser and choose the item
that you want to get it added.
2. For different programs, the press keys, the working area and the pressure curve can be set
differently. When switching from a program to another, the driver will automatically switch to
the set functions accordingly.
3. When you select “All programs”, the functions of press keys that you set are valid for every
program. By clicking Add a Program from the drop-down list, you can set the functions for a
specific program and hence have unique settings for different programs. After that, when you
launch a specific program, the Driver will automatically recognize it and the setting features
will change to its corresponding ones.
5. Setting
Users can set the functions of a driver on this interface, including check out Device
information, Backup setting, General setting, and its version.See Section
6. Common Problems
Click “?” and jump to Forum in our website https://support.huion.com/en/support/home to
get a user manual or feed back the problems to us.
7. Enable Touch Input
"Enable touch input" is checked by default. In this case, the finger touch can be used. If
"Enable touch input" is unchecked, the finger touch is disabled. In this case, touch input can
only be realized by the digital pen.
Pen Computer Setting
Select the Working Area tab to adjust the ratio of the distance of pen movement on the
pen computer to that of the corresponding cursor movement on the monitor. By
default, the entire active area of the pen computer maps to the whole monitor.
1. Working Area Setting
Define the pen computer area that will be mapped to the monitor. Three modes on the driver
can be chosen:
7 / 23
