HumanTechnik TravelTim User manual

Thank you for choosing travel
T
l m, a modern battery operated vibrating travel alarm clock with
illuminated 24-hour digital display.
Description
The travel
T
l m is an electronic alarm clock with a digital display. The alarm can wake you up with
combinations of vibration, sound or flashing light. It can be placed underneath your pillow so that
when the alarm time is reached the clock will vibrate and wake you up. The strap can be used to
clip the clock to the pillow or sheet to prevent it moving during sleep. The sound or light functions
can also be used to alert you. A socket is provided to allow connection to an optional external
vibrating pad if you are a heavy sleeper or want to keep the
clock on the bedside table.
Operation
Key Functions
Display Light / Stop Alarm
Flashing light alarm, audible alarm and
vibrating alarm
Vibrating alarm (Only)
Flashing light alarm and audible alarm
Disable alarm
Set alarm
Set time
Time setting locked
Zzz Snooze alarm
12/24 h 12/24 hour(s) switch
1. Batteries
The travel
T
l mis operated with 1 AAA Alkaline battery
(Time and Alarm display) and 2 AA Alkaline batteries
(Vibration/Flash/Sound).
Open the battery compartment by sliding the cover off in
the direction of the arrow. Insert the 3 batteries according
to the markings in the battery compartment. Replace
battery cover. You may find opening the green flap fully will
make it easier to slide the cover off.
24H
12H

The AAA clock battery should last approx 2 years and the alerting AA batteries should wake you
every morning for about up to 6 months, however this will depend on how long the alarm runs
for before turning off and whether you use one or more of the vibration, flash and sound alerts. If
you feel the vibration is getting low after a period of time change the just AA batteries to ensure a
good vibration.
2. Time setting
Choose 12/24 hour switch, located on the rear as required.•
Slide the right hand switch to• .
Press and hold• / buttons as required to set current time.
Slide the switch to• to lock times.
Note: If your travel
T
l mis set to 12 hour display “PM“ indicator will appear when post meridian
hours are in effect.
3. Alarm setting
Slide the right hand setting switch to• .
Press and hold• / buttons as required to set alarm time.
Slide the switch to• to lock times.
4. Alarm operation
Choose flashing light, audible and vibrating alarm• ,vibrating alarm (only) or flashing light
and audible alarm with the left hand switch.
The alarm symbol• will appear top left in the display when the alarm is set to operate.
The bottom position of the left hand switch• turns the alarm function off.
To cancel the alarm when it activates press the large front button• . If the left hand alarm
operation switch is not changed the alarm will automatically remain set for the next day.
5. Using the snooze alarm
Choose and set your alert preference from vibrate, flash and sound as above and the alarm set•
indicator will show in the display.
Slide the right hand time setting switch from locked• to Zzz position. Zz will now appear in
the display.
The large front button• now changes from a cancel button to a snooze button. When the
alarm sounds press to enjoy 8 minutes more rest. If the snooze function is operating the Zz
in the display will flash until the 8 minutes has elapsed.
To cancel the alarm you must move the right hand switch back to lock and either press the•
large front button to cancel the alarm or slide the left set switch to disable future alarms.
Note: The socket on the right side of the travel
T
l mis an auxiliary output for an optional vibrating
pillow or other modules available from your supplier.
Note: This product is not waterproof. Do not place the product where it could get wet or near
open flames or excessive heat sources. Please make sure that the batteries are not exposed to
excessive heat from such as sunlight, fire or anything similar.

Technical data
Dimensions: 95x70x30mm (H x W x D) with flap folded in
Weight: 130g incl. batteries
Power supply: 1 x 1.5 V battery AAA (Typ LR03) and
2 x 1.5 V battery AA (Typ LR6) for the vibrating motor
Colour: Black/ green
Alarm duration: 4 minutes
Technical specifications subject to change without notice.
This product complies with all European Union standards.
You can obtain EU compliance declarations from your dealer, or directly from the manufacturer of
this product.
Designed in Europe
travelTim GB 0711

Designed
in Europe
Vibrating Travel Alarm Clock