Humminbird HELIX 5 SERIES User manual

HELIX® 5 Series In-Dash Mounting Installation Guide
1
532319-1_B
Installati n Overview
Following are instructions for the in-dash mount installation of the HE IX 5 control head. We encourage you
to read this guide before starting the installation, so you may understand the installation requirements.
Customer Service: If you find that any items are missing from your installation kit, visit our Web site at
humminbird.com or call Humminbird® Customer Service at 1-800-633-1468.
Supplies: In addition to the hardware supplied with your accessory, you will need a drill and various drill
bits, a cutting tool for the dashboard material, safety goggles, a dust mask, rubbing alcohol, and masking
tape.
NOTE: The illustrations in this manual may not look the same as your product, but your unit will function in the same
way.
1. Plan the M unting L cati n
Start by locating a suitable, flat area of the dashboard for mounting. Consider the following to find the best
mounting location:
•Interference: The mounting location must provide adequate distance from electric motors or any
equipment that may cause electronic interference.
•Stability: The mounting area should be protected from waves, shock, vibration, and water.
•Depth: The mounting area should have a depth of 3 inches (7.62 cm) to allow space for the control
head and cables.
•entilation: The area beneath the mounting surface should be well-ventilated.
•Accessibility: The location should be easily accessible for all cables to reach the ports on the back of
the control head.
NOTE: If a cable is too short for your application, extension cables are available. For assistance, contact Humminbird
Customer Service at humminbird.com or call 1-800-633-1468.
HELIX 5 Series In-Dash Mount Dimensions
VIEW
MENU
EXIT
7.55 in (191.77 mm)
4.28 in
(108.71 mm)
2.90 in (73.66 mm)
2.17 in (55.12 mm)

HELIX® 5 Series In-Dash Mounting Installation Guide
2
532319-1_B
2. Cut the In-Dash M unting H le
To in-dash mount the HE IX control head, start by placing the components on the surfaces where you intend
to install them.
1. Review the instructions, measurements, and cutting options indicated on the In-dash Mounting
Template.
2. Tape the template to the chosen in-dash mounting location.
3. Using the template, select the cutting method that is best for your boat:
• Drill one entry hole away from the main cut line that is large enough to insert the blade of your
cutting tool.
OR
• Drill a corner hole away from the main cut line using a drill bit that will create a hole as close to a
diameter of .42 inches (10.7 mm) as possible. Repeat for the other three corners as indicated on the
template. Use one of the corner holes as an entry hole, or drill an additional entry hole away from
the main cut line.
4. Carefully begin cutting toward the dotted cut line, and continue cutting to the inside of the line around
the template.
5. Test the fit of the control head in the mounting hole and make adjustments to the mounting hole, as
needed. Remove the template when finished.
6. Thoroughly clean and deburr the mounting hole.
3. Install the C ntr l Head
1. Clean the Mating Surfaces: Use rubbing alcohol to clean the edges of the in-dash mounting hole and
the back rim of the control head where the gasket will be installed (see the illustration Installing the
Gasket). Allow the cleaned areas to dry completely.
2. Place the control head, with the screen facing down, on a towel or cloth on a stable and level surface.
3. Peel the brown liner from the adhesive backing on the gasket.
4. Hold the sides of the plastic film attached to the gasket with the adhesive side facing down (see the
illustration Installing the Gasket). Carefully align the gasket around the rim of the control head so it is
centered. Confirm there are no uneven gaps.
WARNING! Use caution when handling the gasket. Do not allow the adhesive to touch the sides or rear
of the control head during installation.
5. Lightly press one side of the gasket down onto the flat rim of the control head.
6. Confirm the alignment has not changed and that the gasket is centered around the control head. Then
lightly press down on the remaining sides of the gasket. Make adjustments, as needed.
7. Carefully peel the plastic film from the gasket.
8. Insert the control head through the mounting hole from the front side of the dash. Press down firmly
around the sides of the control head for 20 seconds to secure the adhesive.
Connecting the Cables
power COM
(communica ions) ransducer
Optional: Use a Y-Cable o connec
Transducer and Speed Sensor Accessory
Control Head Ports
Ins all he gaske along he fla rim of
he con rol head (highligh ed in grey).
Installing the Gasket
Confirm he gaske is evenly cen ered
around he rim of he con rol head.
Installing the Control Head

HELIX® 5 Series In-Dash Mounting Installation Guide
3
532319-1_B
4. R ute and C nnect the Cables
1. See the installation guides included with each hardware
component to install power and other optional equipment.
2. Route all cables (power, transducer, accessories) to the control
head and insert the connectors into the correct ports on the back
of the control head (see the illustrations Connecting the Cables
and Control Head Ports).
CAUTION! Do NOT mount the cables where the connectors could
be submerged in water or flooded. If cables are installed in a
splash-prone area, it may be helpful to apply dielectric grease to
the inside of the connectors to prevent corrosion. Dielectric
grease can be purchased separately from a general hardware or
automotive store.
Your control head is ready for on-the-water operation. See your control
head operations manual for further details.
1-Year Limited Warranty
We warrant the original retail purchaser that products made by
Humminbird have been manufactured free from defects in materials
and workmanship. This warranty is effective for one year from the date
of original retail purchase. Humminbird products found to be defective
and covered by this warranty will be repaired or replaced free of charge
at Humminbird’s option and returned to the customer freight prepaid.
Humminbird’s sole responsibility under this warranty is limited to the
repair or replacement of a product that has been deemed defective by
Humminbird. Humminbird is not responsible for charges connected
with the removal of such product or reinstallation of replaced or
repaired parts; or shipping charges to the factory or authorized service
center (if outside the U.S.).
This warranty does not apply to a product that has been:
• Improperly installed;
• Used in an installation other than that recom mended in the
product installation and operation instructions;
• Damaged or has failed because of an accident or abnormal
operation;
• Repaired or modified by entities other than Humminbird.
Please retain your original receipt as a proof of the purchase date. This
will be required for in-warranty service.
THIS WARRANTY IS EXPRESS Y IN IEU OF ANY OTHER WARRANTIES,
OB IGATIONS OR IABI ITIES ON THE PART OF HUMMINBIRD AND WI
BE THE CUSTOMER’S EXC USIVE REMEDY, EXCEPT FOR ANY APP ICAB E
IMP IED WARRANTIES UNDER STATE AW WHICH ARE HEREBY IMITED
IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINA PURCHASE.
IN NO EVENT WI HUMMINBIRD BE IAB E FOR ANY INCIDENTA OR
CONSEQUENTIA DAMAGES FOR BREACH OF ANY EXPRESS OR IMP IED
WARRANTY RE ATING TO THE PRODUCTS.
Some states do not allow limitations on an implied warranty, or the
exclusion of incidental or consequential damages, so the above
exclusions may not apply to you. You may also have other rights, which
vary from state to state.
Humminbird Service P licy
Even though you’ll probably never need to take advantage of our
incredible service policy, it’s good to know that we back our products
this confidently. We do it because you deserve the best. We will make
every effort to repair your unit within three business days from the
receipt of your unit at our factory. This does not include shipping time to
and from our factory. Units received on Friday are typically shipped by
the following Wednesday, units received Monday are typically shipped
by Thursday, etc.
All repair work is performed by factory-trained technicians to meet
exacting factory specifications. Factory-serviced units go through the
same rigorous testing and quality control inspections as new
production units.
After the original warranty period, a standard flat rate service charge
will be assessed for each repair (physical damage and missing parts are
not included). Any repairs made after the original warranty will be
warranted for an additional 90 days after service has been performed
by our factory technicians. You can contact Humminbird Customer
Service or visit our Web site to verify the flat rate repair fee for your
product (visit the Product Support section):
http://www.humminbird.com
We reserve the right to deem any product unserviceable when
replacement parts are no longer available or impossible to obtain. This
Service Policy is valid in the United States only. This applies only to
Humminbird products returned to our factory in Eufaula, Alabama. This
Service Policy is subject to change without notice.
DOMESTIC (USA) CUSTOMERS:
PLEASE DO NOT RETURN THIS PRODUCT TO STORE FOR SERVICE
For all technical issues please call 1-800-633-1468
or visit www.humminbird.com, click SUPPORT.
Please reference product serial number and
model number when contacting Humminbird.

HELIX® 5 Series In-Dash Mounting Installation Guide
4
532319-1_B
Returning Y ur Unit f r Service
Before sending your unit in for repair, please contact the factory, either by
phone or by email, to obtain a Repair Authorization Number for your unit.
NOTE: Please do not return your Humminbird to the store for service.
Please have your product model name and serial number available
before calling the factory. If you contact the factory by e-mail, please
include your product model name and serial number in the e-mail, and
use Request for Repair Authorization Number for your e-mail subject
header. You should include your Repair Authorization Number in all
subsequent communications about your unit.
For IN-WARRANTY service, complete the following steps:
• Obtain a Repair Authorization Number from Humminbird Customer
Service.
• Tag product with your name, street address, phone number and
your assigned Repair Authorization Number.
• Include a brief written description of the problem.
• Include a copy of your receipt (to show proof and date of purchase).
• Return product freight prepaid to Humminbird, using an insured
carrier with delivery confirmation.
For OUT-OF-WARRANTY service, complete the following steps:
• Obtain a Repair Authorization Number from Humminbird Customer
Service.
• Include payment in the form of credit card number and expiration
date, or a money order. Please do not send cash.
• Tag product with your name, street address, phone number and
your assigned Repair Authorization Number.
• Include a brief written description of the problem.
• Return product freight prepaid to Humminbird, using an insured
carrier with delivery confirmation.
C ntact Humminbird
Web site humminbird.com
E-mail [email protected]
Telephone [phone]
Direct Shipping Humminbird
Service Department
678 Humminbird ane
Eufaula, A 36027 USA
WARNING! This device should not be used as a navigational aid to
prevent collision, grounding, boat damage, or personal injury. When
the boat is moving, water depth may change too quickly to allow time
for you to react. Always operate the boat at very slow speeds if you
suspect shallow water or submerged objects.
WARNING! Disassembly and repair of this electronic unit should only
be performed by authorized service personnel. Any modification of the
serial number or attempt to repair the original equipment or accessories
by unauthorized individuals will void the warranty.
EN IRONMENTAL COMPLIANCE STATEMENT: It is the intention of Johnson
Outdoors Marine Electronics, Inc. to be a responsible corporate citizen,
operating in compliance with known and applicable environmental regulations,
and a good neighbor in the communities where we make or sell our products.
WEEE DIRECTI E: EU Directive 2002/96/EC “Waste of Electrical and Electronic
Equipment Directive (WEEE)” impacts most distributors, sellers, and
manufacturers of consumer electronics in the European Union. The WEEE
Directive requires the producer of consumer electronics to take responsibility
for the management of waste from their products to achieve environmentally
responsible disposal during the product life cycle.
WEEE compliance may not be required in your location for electrical &
electronic equipment (EEE), nor may it be required for EEE designed and
intended as fixed or temporary installation in transportation vehicles such as
automobiles, aircraft, and boats. In some European Union member states,
these vehicles are considered outside of the scope of the Directive, and EEE for
those applications can be considered excluded from the WEEE Directive
requirement.
This symbol (WEEE wheelie bin) on product indicates the product must
not be disposed of with other household refuse. It must be disposed of
and collected for recycling and recovery of waste EEE. Johnson
Outdoors Marine Electronics, Inc. will mark all EEE products in
accordance with the WEEE Directive. It is our goal to comply in the collection,
treatment, recovery, and environmentally sound disposal of those products;
however, these requirements do vary within European Union member states.
For more information about where you should dispose of your waste
equipment for recycling and recovery and/or your European Union member
state requirements, please contact your dealer or distributor from which your
product was purchased.
© 2017 Johnson Outdoors Marine Electronics, Inc. All rights reserved.