Hunklinger allortech S100 Installation guide

Kerb Stone Clamp S100
Overview - does not replace the operation manual
A Jaw Combination Joice of Gap Jaws
10 cm
 
  
100 cm
C
B
A
D
A = 1 x Rubber Jaw 12 cm long, outmost position D= Border Stone 8/10 cm: Gap Jaw 7 cm
B = 2 x Rubber Jaws 6 cm short, innermost position E= Kerb Stone 12/15 cm: Gap Jaw 9 cm
C= 1 x Gap Jaw 7 oder 9 cm wide, outmost position = Line
B Stop Brackets define Clamping Position of
Gap Jaw Rubber Jaw 12 cm
   
FF
G
G
F
GG
F
F= Setting of Stop Bracket G= Stop Bracket -> clamping position = Line
E

CHeight Compensation -> Hanger Flange on chain = bolted out (BA S. 30)
Factory default: Without height compensation Recommended: With height compensation
H
H
I
I
H
H
H= Bolt, I= Hanger Flange
Hanger flange is directly connected with
the Keb Stone Clamp.
Caution: Carrier machine puts
pressure on clamp and bedding.
DInclination ECrosswise Clamping
H
for slopes with Rubber Jaws 6 cm
otherwise 2 x Gap Jaw 12 cm
FOther Elements - other Jaws
+498024 / 47508-77
Just call for quick help.
)
Carrier machine doesn‘t put pressure on
the Kerb Stone Clamp or bedding.
Only the stone‘s weight puts pressure on
the bedding.
-> flexible working