Husqvarna LC 247i User manual

LC 247i, LC 247iX, LC 347iV, LC 347iVX,
LC 353iV, LC 353iVX
EN Operator's manual 2-25
BG Ръководство за експлоатация 26-53
CS Návod k použití 54-79
DA Brugsanvisning 80-104
DE Bedienungsanweisung 105-131
EL Οδηγίες χρήσης 132-159
ES Manual de usuario 160-185
ET Kasutusjuhend 186-209
FI Käyttöohje 210-233
FR Manuel d'utilisation 234-260
HR Priručnik za korištenje 261-284
HU Használati utasítás 285-310
IT Manuale dell'operatore 311-336
JA 取扱説明書 337-361
LT Operatoriaus vadovas 362-386
LV Lietošanas pamācība 387-412
NL Gebruiksaanwijzing 413-438
NO Bruksanvisning 439-462
PL Instrukcja obsługi 463-489
PT Manual do utilizador 490-516
RO Instrucţiuni de utilizare 517-542
RU Руководство по эксплуатации 543-572
SK Návod na obsluhu 573-597
SL Navodila za uporabo 598-622
SR Priručnik za rukovaoca 623-648
SV Bruksanvisning 649-672
TR Kullanım kılavuzu 673-696
UK Посібник користувача 697-724
ZH 操作手册 725-745

Contents
Introduction..................................................................... 2
Safety..............................................................................5
Assembly...................................................................... 13
Operation...................................................................... 14
Maintenance................................................................. 18
Troubleshooting............................................................ 20
Transportation, storage and disposal........................... 21
Technical data.............................................................. 22
EC Declaration of Conformity....................................... 25
Registered trademarks................................................. 25
Introduction
Product description
The product is a pedestrian-controlled rotary lawn
mower. The grass is collected in a grass catcher.
Remove the grass catcher to get rear discharge of the
grass. Attach a mulch kit (accessory) to cut the grass
into fertilizer.
Intended use
Use the product to cut grass. Do not use the product for
other tasks.
21199 - 005 - 09.12.2020

Product overview
1
1
1016 12 17
11
14
18 20
21
22
23
24
15
2
3
4
5
6
9
7
8
LC 347iVX
LC 353iVX
13
19
1. Control panel
2. Motor brake handle
3. Start inhibitor
4. Grass catcher
5. Rear cover
6. Safety key
7. Handle knob
8. Battery cover
9. Cutting height control
10. ON/OFF button
11. Indicator for
Bluetooth® wireless technology
12. SavE button
13. SavE indicator
14. Battery indicator
15. Speed level indicator (LC 347iV, LC 347iVX,
LC 353iV, LC 353iVX)
16. Decrease speed button (LC 347iV, LC 347iVX,
LC 353iV, LC 353iVX)
17. Increase speed button (LC 347iV, LC 347iVX,
LC 353iV, LC 353iVX)
18. Error LED
19. Cutting cover
20. Operator's manual
21. Rating plate
22. Drive bail (LC 347iV, LC 347iVX, LC 353iV,
LC 353iVX)
23. Battery charger (Accessory)
24. Battery (Accessory)
1199 - 005 - 09.12.2020 3

Symbols on the
product
WARNING! Be careful
and use the product
correctly. This product
can cause serious
injury or death to the
operator or others.
Read the operator's
manual carefully and
make sure that you
understand the
instructions before use.
Keep persons and
animals at a safe
distance from the work
area.
Look out for thrown
objects and ricochets.
Warning: Keep hands
and feet away from the
rotating blade.
Warning: Keep hands
and feet away from
rotating parts.
Remove the safety key
before you do repair
work or maintenance.
Do not expose to rain.
The product or package
of the product is not
domestic waste.
Recycle it at a recycling
station for electrical and
electronic equipment.
The product agrees
with applicable EC
directives.
The product agrees
with applicable
Eurasian Customs
Union directives.
The product agrees
with applicable
UkrSEPRO directives.
The product agrees
with applicable RCM
directives. Applies to
AU/NZ only
Noise emission to the
environment according
to European Directive
2000/14/EC and New
South Wales legislation
"Protection of the
Environment
41199 - 005 - 09.12.2020

Operations (Noise
Control) Regulation
2017". Noise emission
data can be found on
the machine label and
in the Technical data
chapter.
The product is drip
protected.
Start procedure: push the ON/OFF
button, loosen the start inhibitor, push
the motor brake handle down.
Release the motor
brake handle to stop.
Slow
Fast
Scannable code
Note: Other symbols/decals on
the product refer to certification
requirements for some markets.
Label on the product
Keep hands and feet away from
the rotating blades.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Safety
Safety definitions
Warnings, cautions and notes
are used to point out specially
important parts of the manual.
WARNING: Used if there
is a risk of injury or death
for the operator or
bystanders if the
instructions in the
manual are not obeyed.
1199 - 005 - 09.12.2020 5

CAUTION: Used if there
is a risk of damage to the
product, other materials
or the adjacent area if
the instructions in the
manual are not obeyed.
Note: Used to give more
information that is necessary in
a given situation.
General safety instructions
WARNING: Read the
warning instructions that
follow before you use the
product.
•This product is dangerous if
used incorrectly or if you are
not careful. Injury or death can
occur if you do not obey the
safety instructions.
•This product produces an
electromagnetic field during
operation. This field may
under some circumstances
interfere with active or passive
medical implants. To reduce
the risk of serious or fatal
injury we recommend persons
with medical implants to
consult their physician and the
medical implant manufacturer
before operating this product.
•Always be careful and use
your common sense. If you
are not sure how to operate
the product in a special
situation, stop and speak to
your Husqvarna dealer before
you continue.
•Keep in mind that the operator
will be held responsible for
accidents that involve other
persons or their property.
•Keep the product clean. Make
sure that you can clearly read
signs and decals.
•Never allow children or people
unfamiliar with these
instructions to use the
appliance. Local regulations
may restrict the age of the
operator
•Always monitor a person, with
decreased physical capacity or
mental capacity, that uses the
product. A responsible adult
must be there at all times.
•Do not use the product if you
are tired, ill, or under the
influence of alcohol, drugs or
medicine. This has a negative
effect on your vision,
alertness, coordination and
judgment.
•Do not use the product if it is
defective.
61199 - 005 - 09.12.2020

•Do not change this product or
use it if it is possible that it has
been changed by others.
Work area safety
WARNING: Read the
warning instructions that
follow before you use the
product.
•Remove objects such as
branches, twigs and stones
from the work area before you
use the product.
•Objects that hit against the
cutting equipment can eject
and cause damage to persons
and objects. Keep bystanders
and animals at a safe distance
from the product.
•Never use the product in bad
weather such as fog, rain,
strong winds, intense cold and
risk of lightning. To use the
product in bad weather or in
moist or wet locations is tiring.
Bad weather can cause
dangerous conditions, such as
slippery surfaces.
•Look out for persons, objects
and situations that can prevent
safe operation of the product.
•Look out for obstacles, such
as roots, stones, twigs, pits
and ditches. Long grass can
hide obstacles.
•To cut grass on slopes can be
dangerous. Do not mow
excessively steep slopes. Do
not use the product on ground
that slopes more than 15°
•Exercise extreme caution
when changing direction on
slopes. Operate the product
across the face of slopes. Do
not move up and down.
•Be careful when you go near
hidden corners and objects
that prevent a clear view.
Work safety
WARNING: Read the
warning instructions that
follow before you use the
product.
•Use this product to cut grass
lawns only. It is not permitted
to use it for other tasks.
•Use personal protective
equipment. Refer to
Personal
protective equipment on page
9 .
•Make sure that you know how
to stop the motor quickly in an
emergency.
•Do not operate the product in
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
•Do not operate the product
unless the blade and all
1199 - 005 - 09.12.2020 7

covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
•Make sure that the blade does
not hit objects such as stones
and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
causes heavy vibration and a
very high risk that the blade
becomes loose.
•If the blade hits an object or if
vibrations occur, stop the
product immediately. Stop the
motor, turn the safety key to 0
and remove the battery.
Examine the product for
damages. Repair damages or
let an authorised service agent
do the repair.
•Never attach the motor brake
handle permanently to the
handle when the motor is
started.
•Put the product on a stable,
flat surface and start it. Make
sure that the blade does not
hit the ground or other objects.
•Always stay behind the
product when you operate it.
•Let all the wheels stay on the
ground and keep 2 hands on
the handle when you operate
the product. Keep your hands
and feet away from the
rotating blades.
•Do not tilt the product when
the motor is started.
•Be careful when you pull the
product rearward.
•Never lift up the product when
the motor is started. If you
must lift the product, first stop
the motor, turn the safety key
to 0 and remove the battery.
•Do not walk rearward when
you operate the product.
•Stop the motor when you
move across areas without
grass, for example paths
made of gravel, stone and
asphalt.
•Do not run with the product
when the motor is started.
Always walk when you operate
the product.
•Stop the motor before you
change the cutting height.
Never make adjustments with
the motor started.
•Never let the product stay out
of view with the motor started.
Stop the motor and make sure
that the cutting equipment
does not rotate.
81199 - 005 - 09.12.2020

Safety instructions for operation
Personal protective equipment
WARNING: Read the
warning instructions that
follow before you use the
product.
•Personal protective equipment
cannot fully prevent injury but
it decreases the degree of
injury if an accident does
occur. Let your dealer help
you select the right equipment.
•Use heavy-duty slip-resistant
boots or shoes. Do not use
open shoes or go with bare
feet.
•Use heavy, long pants.
•Use protective gloves when
necessary, for example when
you attach, examine or clean
the cutting equipment.
Safety devices on the product
WARNING: Read the
warning instructions that
follow before you use the
product.
•Do not use a product with
defective safety devices.
•Do a check of the safety
devices regularly. If the safety
devices are defective, speak
to your Husqvarna service
agent.
To do a check of the cutting
cover
The cutting cover decreases
vibrations in the product and
decreases the risk of injury from
the blade.
• Examine the cutting cover to
make sure that there are no
damages such as cracks.
Safety key
The safety key is below the
battery lid. The safety key
connects the battery that
supplies the motor with power.
•Start and stop the motor to do
a check of the safety key.
•If the safety key operates
correctly, the motor can only
start when the safety key is in
position 1.
1199 - 005 - 09.12.2020 9

Motor brake handle
The motor brake handle stops
the motor. When the motor
brake handle is released, the
motor stops.
To do a check of the motor
brake, start the motor and then
release the motor brake handle.
If the motor does not stop in 3
seconds, let an approved
Husqvarna service agent adjust
the motor brake.
To examine the start inhibitor
Do a check of the start inhibitor
to make sure that it prevents
operation of the motor.
1. Push the motor brake handle
in the direction of the
handlebar. The start inhibitor
stops the movement.
2. Push the start inhibitor out.
3. Release the start inhibitor
and make sure that it goes
back to its initial position.
Battery safety
WARNING: Read the
warning instructions that
follow before you use the
product.
•Use Husqvarna rechargeable
batteries as a power supply for
related Husqvarna products
only. To prevent injury, do not
use the battery as a power
supply for other devices.
•Do not use non-rechargeable
batteries.
•Risk of electrical shock. Do not
connect the battery terminals
to keys, coins, screws or other
metal. This can cause a short
circuit of the battery.
•Do not put objects into the air
slots of the battery.
•Keep the battery away from
sunlight, heat or open flame.
The battery can explode and
cause burns and/or chemical
burns.
•Keep the battery away from
rain and wet conditions.
•Keep the battery away from
microwaves and high
pressure.
10 1199 - 005 - 09.12.2020