Husqvarna Rider ProFlex 18 Instruction manual

Workshop manual
Rider ProFlex 18
Rider ProFlex 21
English
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-1
Contents
Contents ..................................................................1
Safety Instructions .................................................2
General Instructions ............................................2
Special Instructions .............................................2
Special Tools ..........................................................3
Specifications .........................................................5
Delivery and Dealer Service ..................................7
Delivery Service ..................................................7
After the First 8 Hours .........................................7
25-Hour Service ..................................................7
50-Hour Service ..................................................7
100/200-Hour Service .........................................7
300-Hour Service ................................................8
At least once each season ..................................8
Service Schedule ...............................................9
Delivery Procedures ..........................................12
Battery ...............................................................14
Arm Supports ....................................................14
Steering Wheel .................................................15
Tow Hook ..........................................................15
Checking the Engine Oil Level ..........................15
Checking the Transmission Oil Level ................16
Wheels ..............................................................16
Checking and Adjusting the Cutting Unit ..........17
Test Running .....................................................17
Starting the Engine ...........................................17
Engine Speed Regulator ...................................18
Final inspection .................................................18
Administration ...................................................18
Design and Function ............................................19
General .............................................................19
Serial Number ...................................................20
Engine ...............................................................21
Steering .............................................................22
Driving ...............................................................23
Cutting Unit .......................................................25
Repair Instructions ..............................................27
Removing the Engine ........................................27
Fitting the Engine ..............................................29
Fuel tank ...........................................................32
Pulse Air Valve Intake Filter ..............................32
Changing the Engine Oil ...................................33
Checking and Adjusting the Steering Cables ....34
Replacing the Steering Cables .........................35
Removing/Fitting the Steering Shaft .................35
Removing/Fitting the Power Steering ...............35
Removing/Fitting the Cable Pulley ....................36
Adjusting the Brake ...........................................37
Adjusting the Differential Lock ..........................37
Adjusting of the Hydrostatic
Transmission Cable ..........................................38
Checking and Adjusting the Throttle Cable .......38
Checking and Adjusting the Choke Cable ........39
Replacing the Articulated Steering Bearings .... 39
Removing the Pendulum Shaft ........................ 41
Replacing Bushings ......................................... 42
Fitting the Pendulum Shaft ............................... 43
Removing/Mounting
the Hydrostatic Transmission ........................... 44
Replacing the Hydrostatic Transmission
Shaft Seals ....................................................... 46
Seal Replacement, Outgoing Shafts ................ 47
Replacing the Hydrostatic Transmission Cable 49
Fitting the Hydrostatic Transmission Cable ...... 51
Bleeding the Hydrostatic
and Hydraulic Systems .................................... 54
Adjusting the Transmission’s Neutral Position . 55
Transmission Maintenance .............................. 56
Adjusting the Lever Housing ............................ 58
Removing the Belt ............................................ 60
Attaching the Belt ............................................. 60
Replacing the Centre Belt ................................ 61
The Cutting Unit Components .......................... 62
Attaching the Cutting Unit ................................ 62
Adjusting the Unit’s Parallelism
and Cutting Height ........................................... 64
Parallelism ........................................................ 64
Cutting Height .................................................. 64
Adjusting the Cutting Height Range ................. 65
Checking and Adjusting the Ground Pressure . 65
The Cutting Unit’s Service Position .................. 66
Removing the Cutting Unit ............................... 67
Removing the Unit Frame ................................ 69
Belt replacement on cutting units
Combi 112 and Combi 122 .............................. 69
Removing Blades with Bearings ...................... 70
Sharpening and Balancing Blades ................... 74
Removing the BioClip plug (Combi) ................. 74
Electrical System ................................................ 75
Wiring Diagram Rider ProFlex 21 2002 ........... 75
Wiring diagram Rider ProFlex 2003 ................. 76
Ignition and Starter Lock .................................. 77
Hour meter ....................................................... 77
Main fuse .......................................................... 77
Replacing the light bulbs .................................. 78
Safety System .................................................. 79
Hydraulic System ................................................ 81
Hydraulic Hygiene ............................................ 81
Hydraulic Oils ................................................... 81
Fixing Oil Leaks ................................................ 81
Keep the hydraulic oil clean ............................. 82
Working Methods ............................................. 82
Component Locations ...................................... 83
Bleeding the Hydraulic System ........................ 84
Power Steering ................................................. 84
Replacing the Lift Cylinder ............................... 84
Valve block ....................................................... 85
Workshop manual for
Rider ProFlex 18 and ProFlex 21
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-2
SAFETY INSTRUCTIONS
Safety Instructions
General Instructions
This workshop manual is written for personnel with
general knowledge about the repair and service of
riders.
The workshop where the rider is to be repaired
must be equipped with safety equipment in
accordance with local bylaws.
No one may repair the rider unless they have read
and understood the content of this workshop
manual.
The machine is tested and approved only with the
equipment originally provided or recommended by
the manufacturer.
This workshop manual contains the following
boxes in relevant places.
Special Instructions
The fuel used in the rider has the following
hazardous properties:
• The fluid and its vapour are poisonous.
• Can cause eye and skin irritation.
• Can cause breathing problems.
• Is highly inflammable.
When using compressed air, do not direct the jet
towards the body. Air can penetrate into the blood
circulation system, which entails mortal danger.
Use eye protection when working with tensioned
springs.
Wear protective earplugs or earmuffs when test
running.
After test running, do not touch the muffler until it
has cooled. Risk of burns. This is especially true if
the rider is equipped with a catalytic converter. The
coatings on and in the catalytic converter element
are hazardous to ingest. Use protective gloves
when working with the converter/muffler.
The blades are sharp and can cause cuts and
gashes. Use protective gloves when handling the
blades.
Use eye protection when working with the cutting
unit. The belt tensioning spring can break, fly off,
and could cause personal injury.
Use eye protection when working with the battery
with the plugs removed. Be especially careful
when handling battery acid. Acid on the skin can
cause serious corrosive injuries. In the event of
spillage on the skin wash immediately with water.
Acid in the eyes can cause blindness; contact a
doctor immediately.
Be careful when servicing the battery. Explosive
gases form in the battery. Never perform
maintenance on the battery while smoking or in
the vicinity of open flames or sparks. This can
cause the battery to explode and cause serious
injuries.
WARNING!
The warning box warns of the risk
of personal injury if the
instructions are not followed.
IMPORTANT INFORMATION
This box warns of material damage if the
instructions are not followed.
!
IMPORTANT INFORMATION
Waste oil and old filters shall be handled
as hazardous waste.
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-3
SPECIAL TOOLS
Special Tools
The following special tools are used when working on the rider.
Special tools for the engine and transmission are specified in the relevant Workshop Manuals.
506 66 48-01 Engine belt pulley remover.
506 56 76-01 Allen key 5/16" for loosening the engine belt pulley’s Allen screw (Kawasaki).
506 89 92-01 Counter to aid removing the engine belt pulley.
506 89 93-01 Tool for the centre spring.
535 41 32-01 Punch kit for pendulum shaft bushings.
8009-519
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-4
SPECIAL TOOLS
The figures show how the special tools are used.
506 56 76-01
8009-518
8009-517 8009-515
8009-194
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-5
SPECIFICATIONS
Specifications
Rider ProFlex 18 Rider ProFlex 21
Dimensions and weight
Length, base machine 2,080 mm/207.87 cm with tow hook 2,080 mm/207.87 cm with tow hook
Length with Combi 112 2,450 mm/245.06 cm with tow hook 2,450 mm/245.06 cm with tow hook
Length with Combi 122 2,550 mm/255.12 cm with tow hook 2,550 mm/255.12 cm with tow hook
Width, base machine 900 mm/89.92 cm 900 mm/89.92 cm
Width with Combi 112 1,230 mm/48.4" 1,230 mm/48.4"
Width with Combi 122 1,330 mm/52.4" 1,330 mm/52.4"
Height 1,160 mm/115.82 cm 1,160 mm/115.82 cm
Operating weight, base machine 309 kg/308.90 kg 309 kg/308.90 kg
Operating weight with Combi
112
367 kg/366.96 kg 367 kg/366.96 kg
Operating weight with Combi
122
377 kg/376.94 kg 377 kg/376.94 kg
Wheelbase 1,000mm/99.97 cm 1,000mm/99.97 cm
Track width 710 mm/70.71 cm 710 mm/70.71 cm
Max. permitted slope 15°15°
Wheels
Tyre dimensions 18 x 7.50 x 8 18 x 7.50 x 8
Air pressure, front and rear 60 kPa (0.6 kp/cm2)/8.5 PSI 60 kPa (0.6 kp/cm2)/8.5 PSI
Engine
Manufacturer Kawasaki Kawasaki
V-Twin V-Twin
Model FH531V-BS50 FH641V-BS50 (or -AS50)
Power 13.2 kW/18 hp 15.5 kW/21 hp
Displacement 494 cm3/30.1 cu in 675 cm3/41.19 cu in
Fuel at least 87 octane unleaded at least 87 octane unleaded
Tank volume 17 litres/4.5 US Gal 17 litres/4.5 US Gal
Oil SAE 10W/30, 10W/40, API SF-SJ SAE 10W/30, 10W/40, API SF-SJ
Oil volume 1.5 litres/1.6 US qt 1.5 litres/1.6 US qt
Oil volume incl. filter 1.7 litres/1.8 US qt 1.7 litres/1.8 US qt
Start Electric start Electric start
Gearbox
Manufacturer Tuff Torq K 62F Tuff Torq K 66M
Oil SAE 10W/30, class SF-CC SAE 10W/30, class SF-CC
Oil volume, total 2.5 litres/2.6 US qt 2.5 litres/2.6 US qt
Electrical system
Type 12 V, negative grounded 12 V, negative grounded
Battery 12 V, 24 Ah 12 V, 24 Ah
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-6
SPECIFICATIONS
Cutting Unit
Check List
Parallelism, cutting unit with cutting height in position 1: ± 2 mm/± 0.079"
Checking the cutting height in position 1: 40 ± 2 mm/1.57 ± 0.079"
Distance between support plate and drive belt: 3–6 mm/1/8"-1/4"
Distance between the belt adjuster lever and the belt guide, disengaged unit: 17 ± 5 mm/7/16" ± 3/16"
Play
Brake cable: 1 mm / 0.040"
Differential lock cable, ProFlex 21: 0 mm
Cable, hydrostatic pedals: 0 mm
Lock, mechanical lifting lever 2 mm/1/16"
Main fuse Flat pin, 15 A Flat pin, 15 A
Spark plug Champion RCJ8Y NGK BPR4ES
Electrode gap 0.75 mm/0.030" 0.75 mm/0.030"
Bulbs Philips Brilliant Pro 2x12V 20W, type 14613 2x12V 20W, type 14613
Hydraulic System -
Max. working pressure - 45 bar/630 PSI
Tightening Torques
Drive disc steering 5–10 Nm / 3.5-7 lbf. ft. 5–10 Nm / 3.5-7 lbf. ft.
Line pulley steering cable 20-30 Nm / 14-21 lbf. ft. 20-30 Nm / 14-21 lbf. ft.
Belt pulley 35-40 Nm / 25-28 lbf. ft. 35-40 Nm / 25-28 lbf. ft.
Blades M10 bolt 45-50 Nm / 32-36 lbf. ft. 45-50 Nm / 32-36 lbf. ft.
Blades M12 bolt 75-80 Nm / 53-56 lbf. ft. 75-80 Nm / 53-56 lbf. ft.
Blade bearings 20-25 Nm / 14-18 lbf. ft. 20-25 Nm / 14-18 lbf. ft.
Belt tensioning wheel 15-25 Nm / 10-18 lbf. ft. 15-25 Nm / 10-18 lbf. ft.
Fitting screws, engine 20-25 Nm / 14-18 lbf. ft. 20-25 Nm / 14-18 lbf. ft.
Fitting screws, gearbox 20-25 Nm / 14-18 lbf. ft. 20-25 Nm / 14-18 lbf. ft.
Engine belt pulley 70-80 Nm / 50-56 lbf. ft. 70-80 Nm / 50-56 lbf. ft.
Combi 112 Combi 122
Cutting width 1,120 mm/44" 1,220 mm/48"
Cutting heights 40-100 mm/1.57-3.93" 40-100 mm/1.57-3.93"
Blade length 420 mm/16.5" 450 mm/17.7"
Guaranteed noise level 100 dB(A) 102 dB(A)
Width 1,230 mm/48.4" 1,330 mm/52.4"
Weight 50 kg/49.90 kg 60 kg/59.87 kg
Additional weight, ProFlex 8 kg/7.98 kg 8 kg/7.98 kg
Rider ProFlex 18 Rider ProFlex 21
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-7
DELIVERY AND DEALER SERVICE
Delivery and Dealer Service
Delivery Service
1. Fill the battery with battery acid and charge for
four hours.
2. Fit the steering wheel, seat and, where
applicable, other components.
3. Attach the cutting unit.
4. Adjust the cutting unit:
Adjust the lifting springs (the cutting unit’s
‘weight’should be 12-15 kg/26.5-33 lb; if a
brush is to be used, adjust to the maximum
spring tension).
Adjust the cutting unit so that its rear edge is
about 2-4 mm/1/8" higher than its front edge.
Adjust the cutting unit’s cutting height setting
so that the cutting height limit is 5 mm/3/16"
above the unit frame at the lowest cutting
height.
5. Check that the right amount of oil is in the
engine and transmission.
6. Check and adjust the air pressure in the tyres
(60 kPa/0.6 bar/8.5 PSI).
7. Connect the battery.
8. Fill the fuel tank and start the engine.
9. Check that the machine does not move
in neutral.
10. Check:
Driving forwards.
Reversing.
Engaging the blades.
The safety switch in the seat.
The safety switch in the lifting lever.
The safety switch for the hydrostat pedals.
11. Check the engine speed: 3,000 ±75 rpm.
12. Bleed the hydraulic system, top up with oil if
necessary.
13. Inform the customer about:
The need and advantages of following the
service schedule.
The need and advantages of leaving the
machine for service every 300 hours.
The effects of service and maintaining a
service journal on the machine’s resale value.
Application areas for mulching.
14. Fill in the sales papers, etc.
After the First 8 Hours
1. Change engine oil.
25-Hour Service
1. Clean the air filter’s pre-cleaner (foamed
plastic). (Shorter intervals for dusty operating
conditions.)
2. Clean the engine’s cooling air intake and the
transmission’s air intake.
3. Clean the fuel pump’s air filter (for dusty
operating conditions).
50-Hour Service
1. Perform the 25-hour service.
2. Clean/replace the air cleaner’s filter cartridge
(paper filter). (Shorter intervals for dusty
operating conditions.)
3. Check/adjust the cutting height.
4. Check/adjust the parking brake.
5. Inspect the flame proofing/spark arrestor
(extra equipment).
100/200-Hour Service
1. Perform the 25-hour service.
2. Perform the 50-hour service.
3. Change engine oil.
4. Check whether the engine oil filter needs
changing (every 200 hours).
5. Clean/replace the spark plugs.
6. Change the inline fuel filter.
7. Clean/replace the pulse air filter.
8. Clean the cooling fins on the engine and the
transmission.
9. Check whether the transmission oil or filter
needs changing (every 500 hours).
10. Check whether the hydraulic oil filter on the
PF21 needs changing (every 200 hours).
11. Clean the air filter’s paper cartridge and check
whether it needs changing (every 200 hours).
12. Check nuts and screws for tightness.
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-8
DELIVERY AND DEALER SERVICE
300-Hour Service
1. Inspect the machine. Come to agreement with
the customer as to what additional work is to
be carried out.
2. Perform the 25-hour service.
3. Perform the 50-hour service.
4. Perform the 100-hour service.
5. Clean the combustion chamber and grind the
valve seats.
6. Check the play in the engine valves.
7. Replace the air filter’s pre-cleaner
(foamed plastic).
At least once each season
1. Clean the engine’s cooling air intake
(25 hours).
2. Replace the air cleaner’s pre-filter
(foamed plastic) (300 hours).
3. Replace the air filter’s paper cartridge
(200 hours).
4. Change the engine oil (100 hours).
5. Replace the engine oil filter (200 hours).
6. Adjust the cutting height (50 hours).
7. Adjust the parking brake (50 hours).
8. Inspect the flame proofing/spark arrestor,
extra equipment (50 hours).
9. Clean/replace the spark plugs (100 hours).
10. Change the inline fuel filter (100 hours).
11. Clean/replace the pulse air filter (100 hours).
12. Clean the cooling fins (100 hours).
13. Check the play in the engine valves
(300 hours).
14. Change the transmission oil (500 hours).
15. Change the filter in the transmission,
ProFlex 21 (500 hours).
16. Replace the hydraulic oil filter ProFlex 21
(200 hours).
17. Perform the 300-hour service at an authorised
service representative.
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-9
DELIVERY AND DEALER SERVICE
Service Schedule
The following is a list of maintenance procedures
that must be performed on the rider. Most of the
points that are not described in this workshop
manual are found in the operator’s manual.
●= Described in this workshop manual.
❍= Not described in this workshop manual or the
operator’s manual.
▼= Described in the operator’s manual.
Maintenance Page Daily
mainte-
nance
before
Daily
mainte-
nance
after
Weekly
3) main-
tenance
At
least
once
a year
Maintenance interval
in hours
25 50 100 300
Check for fuel and oil leaks - ❍
Check the parking brake 37 ●
Checking the Engine Oil Level 15 ●
Check the fuel pump’s air filter. - ▼
Check the safety switch, seat 79 ●
Check the safety switch, lifting
lever
79 ●
Check the safety switch, pedal
system
79 ●
Check/clean the engine’s
cooling air intake
-▼
Check the cutting unit: 64 ●
•Attaching the blades 70 ●
•Condition of the blades
(sharpness, shape, etc.)
74 ●
Check the steering cables
(any play, etc.)
34 ●
Check fastenings
(screws, nuts, etc.)
-❍
Start the engine and blades,
listen for unusual sounds
-❍
Clean under the cutting unit - ▼
Clean the transmission’s
cooling air intake
-▼
Check the battery’s acid level 14 ●
Check the transmission oil level 16 ●
Check the condition of V-belts,
belt pulleys, etc.
-❍
Check for damage - ❍
Check the air pressure in the
tyres (60 kPa/8.5 PSI)
16 ●
Check to ensure that the cable
seats in the middle are
undamaged
-▼
Clean thoroughly around the
engine.
-❍
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-10
DELIVERY AND DEALER SERVICE
Clean thoroughly around the
transmission.
-❍
Clean around all belts, belt
pulleys, etc.
-▼
Lubricate the three-point link
(nipple)
-▼
Lubricate the seat adjuster - ▼
Lubricate all cables - ▼
Lubricate the safety catch in
the cutting unit
-▼
Lubricate the interior plug in
the cutting unit
-▼
Lubricate the groove for the
cutting unit’s equipment frame
-▼
Lubricate joints in the cutting
unit
-▼
Clean inside the frame tunnel - ❍
Lubricate the pedal
mechanism in the frame tunnel
-▼
Lubricate the gear controller - ▼
Lubricate the parking brake
cable
-▼
Lubricate the throttle. - ▼
Lubricate the choke control. - ▼
Lubricate the guide chain in
the frame tunnel
-▼
Check the steering cables in
the frame tunnel
34 ●
Clean the engine’s cooling air
intake.
-▼▼
Clean the air filter's pre-
cleaner (foamed plastic).
-▼▼
Change the engine oil1). 33 ●●
Clean the air cleaner’s filter
cartridge 2) (paper filter).
-▼▼
Check/adjust the cutting height. 64 ●●
Check/adjust the parking brake. 37 ●●
Inspect the flame proofing/spark
arrestor (extra equipment).
-❍❍
Change the engine’s oil filter
(every 200 hours)
-▼▼
Change the hydraulic oil filter
on the PF21 (every 200 hours).
85 ●●
Maintenance Page Daily
mainte-
nance
before
Daily
mainte-
nance
after
Weekly
3) main-
tenance
At
least
once
a year
Maintenance interval
in hours
25 50 100 300
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-11
DELIVERY AND DEALER SERVICE
1) First change after 8 hours. When operating with a heavy load or at high ambient temperatures, replace every
50 hours. 2) In dusty conditions, maintenance and cleaning are required more often. 3) With daily use, the rider should
be lubricated twice weekly. 4) Performed by an authorised service workshop.
●= Described in this workshop manual.
❍= Not described in this workshop manual or the operator’s manual.
▼= Described in the operator’s manual.
Clean/replace the spark plugs. - ▼▼
Change the inline fuel filter. - ▼▼
Clean/replace the pulse air
filter.
32 ●●
Clean the cooling fins. - ❍❍
Check the play in the engine
valves4)
-❍❍
Check the need to change the
oil and filter in the gearbox4)
(every 500 hours).
56 ●●
Replace the air filter’s pre-
cleaner (foamed plastic)2).
-▼▼
Replace the air filter (paper
filter) 2) (every 200 hours).
-▼▼
Perform the 300-hour service 4).8●●
Maintenance Page Daily
mainte-
nance
before
Daily
mainte-
nance
after
Weekly
3) main-
tenance
At
least
once
a year
Maintenance interval
in hours
25 50 100 300
WARNING!
No service operations may be performed on the engine or cutting unit unless:
•The engine is stopped.
•The parking brake is on.
•The ignition key has been removed.
•The cutting unit is disengaged.
•The ignition cables have been removed from the spark plugs.
!
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-12
DELIVERY AND DEALER SERVICE
Delivery Procedures
To our dealers
A well performed pre delivery service is the first
step towards an active after-sales market.
An active after-sales market benefits everyone:
•The customer will be satisfied with their
machine. They know where to turn in order to
get help if problems arise.
•You gain a regular customer, who recommends
you and your company to other prospective
customers.
•In this way, together we build our brand, and
assume joint responsibility for our products
and our customers.
Be thorough with the paper work.
Fill in the guarantee and delivery documents etc.
and ensure that the customer gets the right
operator’s manual for their machine.
Organise a customer register so that in the future,
you can see which machine the customer owns, as
well as the appropriate serial numbers. The
register is of benefit when you order spare parts
and during future marketing activities.
In conjunction with the delivery, you shall also give
the customer the information required to handle
and maintain their machine in a safe manner.
Remember in particular to inform the customer
about:
•Safety regulations.
•Manoeuvre controls.
•Checking oil levels. Topping up oil and the
type of oil required.
•First oil change after the running in period.
•The need and benefit of following the service
schedule and leaving the machine for regular
service.
•Which fuel is to be used.
•Mowing tips to attain good results. Application
areas for mulching.
•The accessories available for the customer’s
type of machine.
•Guarantee rules.
•Your company and whom the customer should
approach if problems arise.
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-13
DELIVERY AND DEALER SERVICE
Packaging and Unpacking
The machine is normally packed using special
packaging when delivered from the factory. This
packaging is comprised of a wood base with a
strong cardboard top section, all held together with
plastic wrapping.
The base is fitted with pallet feet and the goods
can be handled with a normal forklift truck from the
long side. In order to keep the goods as flat as
possible, two people ought to help the truck driver.
Lift and then drive the truck carefully.
Break the plastic wrapping and remove the
cardboard packaging.
The machine then stands on the base with the
brakes on and is secured with wooden blocks.
Check that the machine has not been damaged
during transport when the packaging is opened.
Any damage should be reported to the transport
company as per routine.
The packaging shall not be returned.
Lifts from the short side, see illustration, require
long pallet forks.
Packed components:
Number Component
1 pc Steering wheel with steering rod
1 pc Allen screw for steering rod
1 pc Lock nut for steering rod
6 pcs Battery plugs
1 pc Operator’s Manual
1 pc Owner’s Manual, Kawasaki
4 pcs Wheels (certain markets)
WARNING!
Handle the transport box carefully.
Keep the goods as flat as possible.
Use long forks to lift from the short
side.
!
8009-124
Long pallet forks are required
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-14
DELIVERY AND DEALER SERVICE
Battery
The battery is delivered dry charged from the
factory. The cells are fitted with seals. The
battery plugs are packed in a plastic bag.
•Slowly fill the battery cells with battery
acid to the max. level mark on the
battery container.
•Wait 20 minutes and then top up with
battery acid as needed.
•Charge the battery with 12 V, max. 6 A,
for four (4) hours.
•Check the electrolyte level and top up if
necessary with distilled water to the upper
level marks on the battery container.
Fit the battery.
Connect the battery with the nuts and bolts
that are attached to the battery. Counter the
bolts when fitting so that the electrodes are
not strained.
•The black cable connects to -.
•The red cable connects to +.
Ensure that the cables do not chafe against
anything.
Fit the cover on the battery and tighten the
strap.
Arm Supports
In those cases where arm supports are
delivered with the machine, it is the dealer’s
responsibility to fit them.
WARNING!
Actions with acid contact
External:
Rinse thoroughly with water.
Internal:
Drink large quantities of water or
milk. Contact a doctor as soon as
possible.
Eyes:
Rinse thoroughly with water. Con-
tact a doctor as soon as possible.
The battery emits explosive gases.
Sparks, flames, and cigarettes must
not be present in the vicinity of the
battery.
6010-007
Hazardous! Corrosive! Poisonous!
!
6008-013
Level marking, battery
8009-377
Connecting the battery
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-15
DELIVERY AND DEALER SERVICE
Steering Wheel
•Fit the steering wheel with the steering
rod on the steering column. Choose a
suitable height position.
•Thread the Allen screw into the thread of
the steering column. Work the wheel
and tighten the Allen screw so that it
reaches the bottom of the thread.
•Fit the lock nut to the Allen screw.
Tow Hook
The tow hook is fitted the ‘wrong’way at the
factory for transport reasons. Fit the tow
hook to the back of the bumper as illustrated.
Checking the Engine Oil Level
Check the oil level in the engine when the
Rider stands horizontal with the engine
switched off.
Open the engine cover.
Loosen the dipstick and pull it out. Wipe off
the dipstick and fit it again.
The dipstick shall not be screwed into place.
Pull out the dipstick and read the oil level.
The oil level should be between the markings
on the dipstick. If the level is approaching the
‘ADD’mark, top up the oil to the ‘FULL’mark
on the dipstick.
The oil is topped up through the hole the
dipstick sits in.
Use an engine oil with a viscosity indicated in
the chart, class SF-SJ.
The engine takes 1.5 litres (1.6 US qt) of oil
excl. the oil filter.
8009-360
Fitting the steering wheel
8009-112
Fitting the tow hook
8009-158
Dipstick
8009-159
Oil level
8009-140
Viscosity chart
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-16
DELIVERY AND DEALER SERVICE
Checking the Transmission Oil
Level
Remove the transmission cover. Loosen both
screws (one on each side) and lift off the
transmission cover.
Leave the cover removed for now.
Check that there is oil in the transmission’s oil
tank. Top up if needed with engine oil SAE
10W/30 (class SF-CC).
Wheels
Fit the wheels (certain markets).
The tyre pressure should be 60 kPa/0.6 kp/
cm2/8.5 PSI for all wheels.
In order to improve drive power, the pressure
in the rear tyres can be reduced to 40 kPa/
0.4 kp/cm2/5.6 PSI.
The highest permitted pressure is 100 kPa/
1.0 kp/cm2/14 PSI.
In those cases where wheel weights are
delivered with the machine, it is the dealer’s
responsibility to fit them. Wheel weights are
normally fitted to the rear wheels.
.
6008-209
Transmission cover
6008-210
The transmission’s oil tank
IMPORTANT INFORMATION
Check and top up with oil after test
running. If there are air pockets in the
transmission or hydraulic system, the oil
level will drop.
RIDER 850
RIDER 850
6008-030
Wheels
IMPORTANT INFORMATION
Different air pressure in the front tyres
will result in the blades mowing the
grass at different heights.
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-17
DELIVERY AND DEALER SERVICE
Checking and Adjusting the Cutting Unit
Performed after checking the tyre air
pressures. See “Adjusting the Unit’s
Parallelism and Cutting Height”on page 64.
Test Running
Fill with petrol. The engine should be run on
a minimum of 87-octane unleaded petrol (not
mixed with oil). Environmentally-adapted
alkylate petrol can be used to advantage.
Starting the Engine
Check that the machine is in neutral and is
standing still on flat ground when the parking
brake is released.
Check that the parking brake works.
Check driving forwards (1) and in reverse (2).
Check that the starter does not work when
one of the hydrostat pedals is pressed.
Check that the engine stops if the driver
stands from the seat when one of the
hydrostat pedals is pressed.
Check that the starter does not work when
the cutting unit is in the lower position.
8009-330
Fuel tank
WARNING!
Petrol is highly flammable.
Observe caution and fill the tank
outdoors.
WARNING!
Never run the engine indoors, in
enclosed or badly ventilated
areas. Engine exhaust fumes
contain poisonous carbon
monoxide.
!
!
8009-328
Parking Brake
1
2
6007-209
Forward and reverse pedals
8009-324
Lower the cutting unit
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

(QJOLVK
'(/,9(5<$1''($/(56(59,&(
&KHFNWKDWWKHFXWWLQJXQLWZRUNVDQGWKDWQR
XQXVXDOVRXQGVDUHKHDUG
8VLQJWKHOHYHUWKHFXWWLQJKHLJKWFDQEH
DGMXVWHGLQGLIIHUHQWSRVLWLRQV
&KHFNWKDWWKHK\GUDXOLFFXWWLQJXQLWOLIWLV
IXQFWLRQLQJRQWKH3UR)OH[
(QJLQH6SHHG5HJXODWRU
&KHFNWKDWWKHHQJLQH¶VPD[VSHHGLV
UHJXODWHGWR
5LGHU3UR)OH[ USP
5LGHU3UR)OH[ USP
)LQDOLQVSHFWLRQ
%OHHGWKHK\GUDXOLFV\VWHPRQWKH3UR)OH[
DIWHUWHVWUXQQLQJ
&KHFNWKHRLOOHYHOLQWKHWUDQVPLVVLRQDQG
WRSXSLIQHFHVVDU\
&KHFNWKDWWKHUHDUHQROHDNVLQFOXGLQJ
HQJLQHRLODQGIXHOOHDNV
5HSODFHWKHWUDQVPLVVLRQFRYHU
&OHDQWKHPDFKLQHLIQHFHVVDU\ZLSHXS
VSLOOHGRLOILQJHUPDUNVRQVWHHULQJZKHHO
DQGFRQWUROVGXVWHWF
$GPLQLVWUDWLRQ
)LOOLQWKHVDOHVSDSHUVFXVWRPHUUHJLVWHU
HWF
'RQ¶WIRUJHWWRILOOLQWKHVHULDOQXPEHURQ
SDJHLQWKHRSHUDWRU¶VPDQXDODQGWR
FRQILUPWKDWWKHSUHGHOLYHU\VHUYLFHKDVEHHQ
SHUIRUPHGLQWKHVHUYLFHMRXUQDO

&XWWLQJKHLJKWVHWWLQJ

+\GUDXOLFFXWWLQJXQLWOLIW

3UHGHOLYHU\VHUYLFHFRQILUPDWLRQ
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com

English-19
DESIGN AND FUNCTION
Design and Function
General
This publication describes the Husqvarna Rider
ProFlex 18 from the 2003 model and the ProFlex
21 from the 2002 model. There are special
workshop manuals for older machines.
Husqvarna Riders are a series of large capacity
riders. It is available in several sizes, from the
smallest Rider 11 to the largest Rider ProFlex 21.
All Riders have articulated steering to ease
mowing around trees and other obstacles. They
also have front-mounted cutting units for controlled
mowing and the best possible cutting result.
In addition, the Husqvarna Riders can also be
equipped with various accessories, such as moss
rakes and snow blades, which makes them flexible
working tools throughout the year.
ProFlex models are only delivered with hydrostatic
transmissions.
The Rider ProFlex is fitted with a Combi 112 or
Combi 122 cutting unit as standard.
8009-318
Rider ProFlex
8009-288
Combi 112
8009-290
Combi 122
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com