Husqvarna Eden Rose 250M LIMITED EDITION User manual
LIMITED EDITION
KEEPING THE WORLD SEWING
User’s Guide
This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including
the following:
Read all instructions before using this household sewing machine.
DANGER - To reduce the risk of electric shock:
machine from the electric outlet immediately after using and before cleaning.
WARNING -
safety.
recommended by the manufacturer as contained in this manual.
it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest
openings of the sewing machine and foot controller free from the accumulation of lint,
dust, and loose cloth.
machine needle.
such as threading needle, changing needle, threading bobbin, or changing presser foot, etc.
SAVE THESE INSTRUCTIONS
A limited edition accessory foot package is packed in
the box with your HUSQVARNA VIKING®EDEN ROSE™
sewing machine. The package contains the following
optional presser feet:
GATHERING FOOT (4127971-45)
BRAIDING FOOT (4129898-45)
PRESSER FOOT KIT
For Gathered Fabric:
To Gather and Attach Gathered Fabric in One Step:
CLEAR PIPING FOOT (4130971-45)
To Make Piping From Your Fabric:
Hint: When you sew this piping into a garment, adjust the needle position so it stitches one
To Stitch Piping into a Seam
Overview ....................................................................4
Extension Table.........................................................5
Standard Accessories and Storage ...............6
Getting Ready to Sew 7
Connecting the Power Supply.........................7
Adjusting the Sewing Speed.............................8
8
8
Needle up/down.....................................................8
Sewing Guide Reference Char t .....................9
Reverse Lever........................................................10
Presser Foot Pressure Dial.............................10
Lowering the Feed Teeth.................................10
Raising and Lowering
the Presser Foot...................................................11
Changing the Presser Foot.............................11
Changing the Needle ........................................12
Placing the thread spool on
the spool pin.........................................................13
Removing the bobbin........................................13
Bobbin Winding....................................................14
Placing the bobbin...............................................15
Threading the Machine.....................................16
Needle threader...................................................17
Bringing up the Bobbin Thread....................18
Stitches.......................................................................19
Stitch selection ......................................................19
Stitch Length...........................................................19
Adjusting stretch stitch balance...................20
To Adjust the Distorted Stitches:................20
Stitch Width............................................................20
Variable needle position ..................................20
Balancing Needle Thread Tension...............21
Basic sewing 22
Straight Stitch Sewing........................................22
Finishing sewing.....................................................23
Seam Guides on the Needle Plate............24
Pivoting ......................................................................24
Utility Sewing 25
Basic Zigzag.............................................................25
Three-step Zigzag ...............................................25
Seam and Overcast ...........................................25
Reinforced Straight Stitch ...............................26
Button Sewing .......................................................26
Automatic Buttonhole......................................27
Corded Buttonhole............................................31
Manual Buttonhole..............................................32
Sewing Zipper .......................................................34
Blind Hem................................................................38
Presser Feet ............................................................39
39
39
39
Care and Maintenance 41
Cleaning the Hook Assembly
Area and Feed Teeth ........................................41
Replacing the Bobbin Case............................42
Replacing the Light Bulb ..................................42
Troubleshooting 43
Table of Contents
8
9
10
11
2 1
3
7
54
6
18 19 20
21
1716
22
23
14 15
28
13
12
26
27
29
25
24
32 33
34
31
30 37
36
35
4
OVERVIEW
1 2
5
EXTENSION TABLE
To remove
Free-arm sewing
To attach
Pin
Some fabrics have a lot of excess dye which can cause discoloration on other fabric but also on
If you suspect that your fabric/ready-to-wear garment contains a lot of excess dye, always pre-
11
910
21 3
12
14
4
13
65 7 8
16
15
17
18
20
19
21
22
6
STANDARD ACCESSORIES
AND STORAGE
2
1
3
4
6
5
Getting Ready to Sew – 7
CONNECTING THE
POWER SUPPLY
Before plugging in the foot control, check to ensure
that it is of type “21361” (see underside of foot
1. Power switch
2. Foot control plug
3. Machine plug
4. Machine socket
5. Power supply plug
6.
Note: Before connecting to the power supply, make
sure the voltage shown on the machine conforms to
For the USA and Canada:
Getting Ready to Sew
1
8 – Getting Ready to Sew
ADJUSTING THE SEWING SPEED
Speed Control Slide
Foot Control
NEEDLE UP/DOWN
2
1
3 4 865 7
Getting Ready to Sew – 9
SEWING GUIDE REFERENCE CHART
WOVEN FABRICS:
STRETCH FABRICS:
LEATHER/VINYL:
SEAM:
Note: For Stretch Fabrics the Sewing Guide
Reference Chart recommends setting the zig zag
OVERCAST:
SEAM/OVERCAST:
BASTE:
Note: Basting will leave permanent holes in
BLIND HEM:
HEM:
BUTTONHOLE:
1
1
2
1
10 – Getting Ready to Sew
REVERSE LEVER
PRESSER FOOT PRESSURE DIAL
LOWERING THE FEED TEETH
1
2
3
3
2
2
1
Getting Ready to Sew – 11
RAISING AND LOWERING
THE PRESSER FOOT
CHANGING THE PRESSER FOOT
1. Make sure the needle is in the
highest position. Pull the presser
foot towards you.
2. To put foot on, line up the cross pin
on the foot between the spring and
t
1 2
c
b
a c
12 – Getting Ready to Sew
CHANGING THE NEEDLE
To Check for a Good Needle:
Note: Check the needle frequently for barbed or
1
2
b
2
1
a
Getting Ready to Sew – 13
PLACING THE THREAD SPOOL
ON THE SPOOL PIN
REMOVING THE BOBBIN
1
2
6
4
3
5
7
1
2c
a
3
b
14 – Getting Ready to Sew
BOBBIN WINDING
Guide the thread around the bobbin
with the free end of the thread coming
Note: Do not move the bobbin winder spindle while
1
2
b
4
3
a
Getting Ready to Sew – 15
PLACING THE BOBBIN
Guide the thread into the front
1
2
4
3
5
1
3
2
4
5
16 – Getting Ready to Sew
THREADING THE MACHINE
Guide the thread around the bottom
1
2
3
4
ab
Getting Ready to Sew – 17
NEEDLE THREADER
Guide
1
3
2
a
b
18 – Getting Ready to Sew
BRINGING UP
THE BOBBIN THREAD
Table of contents
Other Husqvarna Sewing Machine manuals
Husqvarna
Husqvarna Huskylock 90 User manual
Husqvarna
Husqvarna Viking Platinum Q 160 User manual
Husqvarna
Husqvarna Viking Platinum MN 1000 Instruction Manual
Husqvarna
Husqvarna Platinum 770 User manual
Husqvarna
Husqvarna Quilt Designer II User manual
Husqvarna
Husqvarna VIKING Lisa User manual
Husqvarna
Husqvarna 1200 User manual
Husqvarna
Husqvarna 545 TrioBrake User manual
Husqvarna
Husqvarna Viking Platinum MN 1000 User manual
Husqvarna
Husqvarna VIKING Designer Jade 20 User manual
Husqvarna
Husqvarna VIKING Amber Air S 600 User manual
Husqvarna
Husqvarna HUSKYLOCK 400 User manual
Husqvarna
Husqvarna VIKING Designer EPIC User manual
Husqvarna
Husqvarna Viking Tribute 145C User manual
Husqvarna
Husqvarna Viking Automatic 21 User manual
Husqvarna
Husqvarna Sapphire 960Q User manual
Husqvarna
Husqvarna T 250 User manual
Husqvarna
Husqvarna Viking Platinum Q 165 User manual
Husqvarna
Husqvarna Saphire Series User manual
Husqvarna
Husqvarna 3240 Reference guide
