Hussmann IMPACT Elite E2SPH User manual

B
D
C
F
A
E
P/N 0453532
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
Note: Changed items have been underlined.
E2SPH
Data Sheet Set
P/N 0453532
NSF®Certified
October 2005
Item Part # Description Wiring Item #
FAN ASSEMBLIES AND THERMOSTATS
A. 12W Fan Assembly (1)
0047000 Fan Motor, Evaporator
0124150 Fan Blade,
embossing toward motor
12W Energy Efficient Fan Assembly (1)
0441749 Fan Motor, Evaporator
0124150 Fan Blade,
embossing toward motor
B. 0411744 Standard Non-adjustable (2)
Defrost Thermostat
C. 0353949 Optional Adjustable (3)
Refrigeration Thermostat
Item Part # Description Wiring Item #
LAMPS AND BALLASTS
D. 0466234 Ballast, Electronic
2 lamps (4)
D. 0466235 Ballast, Electronic
3 lamps (4)
E. Fluorescent Lamp (5)
Replace with like fixtures
OTHER
F. 0464718 Hot Well Assembly (6)
We reserve the right to change or revise specifications
and product design in connection with any feature of
our products. Such changes do not entitle the buyer to
corresponding changes, improvements, additions or
replacements for equipment previously sold or shipped.

E2SPH
Meat, Delicatessen
Precut & Packaged
Produce
—
with 2 Hot Wells
4 ft
General
Case Length (without ends or partitions) 48 1/8(1222)
Maximum O/S dimension back to front (with bumper) 63 (1600)
Back of case to front of front panel 35 (889)
Back of case to O/S edge of front skid rail 29 3/4 (756)
Width of skid rail 4 1/2 (114)
RH end of case to outside edge of external support 1 3/8(35)
Stub-up area between front skid rail and front panel 5 3/4(146)
Electrical Service (Electrical Field Wiring connection point)
RH End of case to LH end of connection box 42 1/8 (1070)
Back of storage to connection box,
center of knockout 11 (279)
Waste Outlet
RH End of case to the center of waste outlet 24 1/4 (616)
LH End of case to the center of waste outlet 23 7/8 (606)
Back O/S of case to center of waste outlet 28 1/8 (714)
Water Seal
Edge of water seal to center of waste outlet 4 (102)
Outside diameter of the drip pipe 1 1/2 (38)
NOTE: Water seal outlet must clear front skid rail;
water seal rotation in forward direction only due to low base.
Refrigeration Outlet
Back of case to center of refrigeration outlet 31 1/4 (794)
RH end of case to center of refrigeration outlet 8 3/8 (213)
2 of 8 E2SPH Data Sheet
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
Engineering
Plan Views
Dimensions shown as inches and (mm).
10-2005
23 7 / 8
(606)
Connection Box
(Field Connection Point)
4 Ft Case
Front
Waste
Outlet
Water
Seal
42 1 / 8
(1070)
6 (152)
Ballast Tray
48 1 / 8
(1222)
24 1 / 4
(616)
8 3 / 8 (213)
11
(279)
16
(406)
28 1 / 8
(714)
31 1 / 4
(794)
47
(1194)
63
(1600)

REFRIGERATION DATA
Note: This data is based on store temperature and
humidity that does not exceed 75 (°F) and 55% R.H.
E2SPH
Meat Deli
Discharge Air (°F) 25 28
Evaporator (°F) 18 21
Unit Sizing (°F) 16 19
Btu/hr/ft* E2SPH
Parallel 900 890
Conventional 1000 980
*For all refrigeration equipment other than
Hussmann, use conventional Btu values.
DEFROST DATA
E2SPH
Frequency (hr) 6
Defrost Water 8 lb/ft/day
(± 15% based on case configuration and product
loading).
OFFTIME E2SPH
Temp Term (°F) 48
Failsafe (minutes) 40
ELECTRIC OR GAS Not Recommended
Standard Defrost Thermostat
Close on rise: close 48°F – open 33°F
CONVENTIONAL CONTROLS
Low Pressure Backup Control CI/CO**
E2SPH Meat Deli
Temp (°F) 11 / 6 14 / 4
Indoor Unit Only, Pressure Defrost
Termination (Temp °F)** 48°F
**Use a Temperature Pressure Chart to determine
PSIG conversions.
PHYSICAL DATA
Drip Pipe (in.) 1 1/2
Liquid Line (in.) 3/8
Suction Line (in.) 7/8
Estimated Charge (lb)*** E2SPH
4 ft 0.9
6 ft 1.8
8 ft 1.9
12 ft 2.9
***This is an average for all refrigerant types actual
refrigerant charge may vary by approximately half a
pound.
Length Added to Lineup by Each
End or Insulated Partition 1 in.
3 of 8
P/N 0453532 HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
C
O
I
L
Refrigeration
Outlet FAN
Hot
Wells
(2)
Control
Box
Electrical
Connection
12
(305)
22
(559)
40 1/4
(1022)
35
(889)
9 3/4 (248)
12
(305)
19 1/8
(486)
31
(787)
E2SPH
31 1/4
(794)
28 1/8
(714)
20
(508)
Standard Curved
Sneeze Guard
53 3/4
(1365)
47
(1194)
63
(1600)
4 3/4 (121)
9 1/4
(235)
36
(914)
16
(406)
8 5/8
(219)
Impact Elite E2SPH
Meat, Delicatessen
Precut & Packaged Produce
Elite Specialty Merchandiser Multi-deck, 2 Display Levels, Prep Top, Hot
Wells
Dimensions shown as in. & (mm).
NSF Certification
These merchandisers are manufactured to meet ANSI /National
Sanitation Foundation (NSF®) Standard #7 requirements.
See Page 8 for
shelf arrangement.

4 of 8 E2SPH Data Sheet
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
Impact Elite E2SPH
Meat, Delicatessen
Precut & Packaged Produce
Electrical Data
4 ft
Number of Fans — 12W 1
Amperes Watts
Merchandiser 4 ft 4 ft
Fans
120V 60Hz Standard 0.70 55
120V 50Hz Standard 0.81 59
230V 60Hz Export 0.33 54
230V 50Hz Export 0.38 57
120V 60Hz Energy Efficient 0.38 25
230V 60Hz Energy Efficient 0.19 25
Cycling Anti-sweat Heaters NA
Minimum Circuit Ampacity
120V 60Hz Standard 0.90
120V 50Hz Standard 1.01
230V 60Hz Export 0.53
230V 50Hz Export 0.58
120V 60Hz Energy Efficient 0.58
230V 60Hz Energy Efficient 0.39
Maximum Over Current Protection (120V) 20
Maximum Over Current Protection (230V) 15
Hot Wells
208V 60 Hz One Hot Well 5.8 1200
240V 60 Hz One Hot Well 6.7 1600
208V 60 Hz Two Hot Wells 11.6 2400
240V 60 Hz Two Hot Wells 13.4 3200
Standard Lighting
1 Row Canopy 0.51 62
Optional Lighting
1 Row Rail Lights 0.51 62
1 Row Ledge Lights 0.51 62
Optional Shelf Lighting
1 Row of Shelves 0.51 62
2 Rows of Shelves 0.51 62
Optional Overhead Lighting
1 Row of Incandescent Lamps (2 lamps) 1.26 150
1 Row of Heat Lamps (2 lamps) 2.92 350

5 of 8
P/N 0453532 HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
Defrost
Termination
Thermostat
Refrigeration
Thermostat
Dark Blue
4
To
Condensing
Unit
}
Light Blue
3
Fan Wiring
Offtime Defrost
1 Fan
120V NEUTRAL
BROWN BAND
120V POWER
BROWN BAND Fan 1
Connector
G
Connector
Optional Shelf Harness and Light Circuits for
One Row of Shelves
120 V
Power
B
W
G
B
BL G
W
BL
Shelf Harness
Shelf Light Circuits
4
W
R
G
R
Shelf Lighting
G
R
5
Connector
Connector
B
4 ft case has 1 Fan
4 ft
BL
Connector
G
= 120V POWER = 120V NEUTRAL = Field GROUND = Case GROUND
R = Red G = Green BL = Blue LB = Light Blue DB = Dark Blue B = Black W = White
WARNING
All components must have mechanical ground, and the merchandiser must be grounded.
Circled Numbers = Parts List Item Numbers
Grayed components in 12 foot models only.
120V NEUTRAL
MAROON
BAND
120V POWER
W
B
G
N.E.C.
TAGS
MAROON
BAND
Electric Service Receptacle Receptacles

Optional Lighting: 1 Row Ledge or 1 Row Rail
Light Circuits
Standard Lighting 1 Row Canopy
WARNING
All components must have mechanical ground, and the merchandiser must be grounded.
= 120V POWER = 120V NEUTRAL
R = Red Y = Yellow G = Green BL = Blue B = Black W = White
CIRCLED NUMBERS = PARTS LIST ITEM NUMBERS
120V NEUTRAL
ORANGE OR TAN BAND
W
Light
Switch
120V POWER
ORANGE OR TAN
BAND
BL
R
4
5
R
120V NEUTRAL
ORANGE OR TAN BAND
W
Light
Switch
120V POWER
ORANGE OR TAN
BAND
B
4 ft case has 1 Lamp
BL
R
4
5
R
4 ft case has 1 Lamp
B
Optional Lighting: Overhead 75W Incandescent or 175W Heat Lamp
4 ft case has 2 Lamps
Connector
Connector G
120 V
Power
B
W
G
W
W
B
B
Connector
Connector
Connector
Overhead
Light
Switch
W
GB
ORANGE OR TAN
BAND
6 of 8 E2SPH Data Sheet
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.

7 of 8
P/N 0453532 HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
Water Level
Solenoid
Valve
1
23
4
5
6
7
8
L1
L2 H2
H1
L1
L2
Hot Well
Heating Elements
Probe
Common
Indicator Light
Thermostat
LH or RH Well Marker
R = Red Y = Yellow G = Green BL = Blue B = Black W = White
= 120V POWER
= 120V NEUTRAL = Field GROUND
= Case GROUND
WARNING
All components must have mechanical ground, and the merchandiser must be grounded.
CIRCLED NUMBERS = PARTS LIST ITEM NUMBERS
= 208V POWER
Hot Well Wiring
Hot Wells
208V / 240V POWER
4 ft case has 2 Hot Wells
Field Ground
Control Box
Notes: 1. Hot Wells must be grounded.
6
R
R

8 of 8 E2SPH Data Sheet
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
SHELF CONFIGURATION
This merchandiser is designed for two
shelves.
This illustration shows recommended
shelf depth and shelf angle for the two
locations.
It is critical to case performance that no
product, shelf or stop extend beyond the
load limit, as shown in this illustration.
This configuration supports the air
curtain and provides optimal case
performance.
Check with Hussmann engineering
before using a different configuration.
Load Limit
12 in.
10°
Recommended
Angle
Shelf
Size
18 in.
0°
Impact Elite E2SPH
Meat, Delicatessen
Precut & Packaged Produce