HVCAM HV-72QIC User manual

1
User Manual
（ For Android phones ）
HV-72QIC
Outdoor PTZ wireless IP camera

2
Instructions
Step 1 Camera setup
1. Connect the AC power
2. Plug in Available network cable.
3. Wait 45 seconds for camera to boot up.
Step 2 Android phone setup
1. Download the App from the CD.
2. Connect your WiFi in the same Lan or open GPRS function.
Step 3 How to use App ?
1. After installation, Please find the “P2PCAMERA” app and open it：

3
2. Please tap here to add new camera
 Three ways to add your camera:
①Tap to search your camera:
Choose one from your search result, camera information got automatically:

4
② Tap to scan the QR code on the camera back. Camera information would
be obtained after several seconds.
③ Input camera information manually (Name: any words you like, DID: see the label from
camera bottom, User name: admin, no password)
3. From above any ways you get the camera information, tap

5
4. Now you enter into the monitoring interface successfully, tap the image to show function
keys
5. Function keys
Speaker Microphone (inapplicable for this model)
Snapshot Brightness Contrast
Restore default values
Resolution
Screen size optional

6
Wireless monitoring
1. Back to the previous step 3-3, and tap for WIFI setting:
Tap to search you WiFi, enter into your WIFI password and click :

7
3. The camera already connected your WIFI network, now you can unplug the network
cable for wireless monitoring.
Remote monitoring
On the basis of camera wired/wireless monitoring set , please make your Android phone
connected another Wi-Fi router network in remote place, then open the “P2PCAMERA”
app and add the camera information manually, thus you can control the camera from
anywhere through public internet.
Unlike legacy solutions, HVCAM does not require port forwarding. There is no risk
from leaving ports open on the network. HVCAM uses secure peer to peer networking
solution which provides a secure, encrypted connection each time your camera is
viewed from a remote location.