Hydrofarm Jump Start Modular T5 JSFS18T User manual
JSFS18T, JSFS2T, JSFS4T
MODULAR T5 LIGHT STRIP (WITH TIMER)
USER MANUAL
MODULAR T5 LIGHT STRIP WITH TIMER
WARNINGS
•
•
•
•
•
•
•
•
•
•
NOTE: If mixing 2 and 4 foot strips and daisy-chaining them together, maximum amperage cannot
exceed 3.8A.
READ AND SAVE THESE INSTRUCTIONS
WHAT’S IN THE BOX - 18" STRIP
SPECIFICATIONS
WHAT’S IN THE BOX - FOUR FOOT STRIP
SPECIFICATIONS
WHAT’S IN THE BOX - TWO FOOT STRIP
SPECIFICATIONS
2
USING THE MODULAR T5 LIGHT STRIP WITH TIMER
MOUNTING OR HANGING THE MODULAR T5 LIGHT FIXTURE
NOTE: When ush mounng mulple strips, slide the Light Strips into the oponal Modular T5 4
Strip Dock (JSFD) and connect using the Link Cord (JSFL). Once you have assembled the xture,
plug the power cord into the Modular T5 4 Strip Dock.
SETTING THE TIMER
CHANGING THE LAMP
CARE AND CLEANING
DO NOT immerse the system in water.
DO NOT use gasoline, paint thinner or other chemicals to clean the system.
Hydrofarm.com
JSFS18T, JSFS2T, JSFS4T Instrucons revised - May 16, 2019 11:30 am
LIMITED WARRANTY
Jump Start Light Strip with Timer
Jump Start Light Strip
with Timer
Jump Start Light Strip with Timer
WARRANTY
Hydrofarmtv
This manual suits for next models
2
Table of contents
Popular Lantern manuals by other brands
BEGA
BEGA 84 302 Instructions for use
Cree
Cree LS8 installation instructions
HEPER
HEPER GOLEDO-T 128 LED Installation & maintenance instructions
Coleman
Coleman 4D CPX 6 LED DOUBLE EDGE user guide
Lighting Technologies
Lighting Technologies SLICK.PRS AGRO LED Series manual
NVC
NVC OREGON Series Attachment instructions
