HYOSUNG Comet650 User manual

1
This manual should be considered a permanent part of the motorcycle and
should remain with the motorcycle when resold or otherwise transferred to
a new owner or operator. The manual contains important safety informa-
tion and instructions which should be read carefully before operating the
motorcycle.

22


33


4
All information, illustrations photographs
and specifications contained in this manual
are based on the latest product information
available at the time of publication. Due to
improvements or other changes, there may
be some discrepancies in this manual.
Hyosung reserves the right to make
changes at any time.
lease note that this manual applies to all
specifications for all respective destinations
and explains all equipments. Therefore,
your model may have different standard
features than shown in this manual.
HYOSUNG MOTORS & MACHINERY INC.
CO YRIGHT HYOSUNG MOTORS & MACHINERY INC.
FOREWORD
THANK YOU for choosing Hyosung
motorcycle. We at Hyosung have
designed, tested and produced these
motorcycles using the most modern tech-
nology available to provide you with much
happy, enjoyable, safe riding. Motorcycling
is one of the most exhilarating sports and
insure you to enjoy riding and you should
become thoroughly familiar with the infor-
mation presented in this Owner's Manual
before riding the motorcycle.
The proper care and maintenance that
your motorcycle requires are outlined in this
manual.
By following these instructions explicitly
you will insure a long trouble-free operating
life for your motorcycle. Your Hyosung
dealer has experienced technicians that are
trained to provide your machine with the
best possible service with the right tools and
equipment.

5
MPORTANT
BREAK- N NFORMAT ON FOR
YOUR MOTORCYCLE
The first 1,600km(1,000miles) are the
most important in the life of your motorcycle.
roper break-in operation during this time
will help ensure maximum life and perfor-
mance from your new motorcycle.
Hyosung parts are manufactured of high
quality materials, and manufactured parts
are finished to close tolerances. roper
break-in operation allows the machined sur-
faces to polish each other and mate
smoothly.
Motorcycle reliability and performance
depend on special care and restraint exer-
cise during the break-in period. It is espe-
cially important that you avoid operating the
engine in a manner which could expose the
engine parts to excessive heat.
lease refer to the BREAK-IN section for
specific break-in recommendations.
WARN NG/CAUT ON/NOTE
lease read this manual and follow its
instructions carefully. To emphasize special
information the words WARNING,
CAUTION and NOTE 
N O T E
This provides special information to
make maintenance easier or important
instructions clearer.
These instructions point out special ser-
vice procedures or precautions that
must be followed to avoid damaging the
machine.
CAUT ON
The personal safety of the rider may be
involved. Disregarding this information
could result in injury to the rider.
WARN NG