Hyundai H-CMD4028 User manual

лчиттничюнльтцию.
глтчн.Бзвыдны
www.sotmarket.ru
дбняинфмциятв,
тзывы,бзыиы
Инструкция
Hyundai H-CMD4028
Перейти в карточку товара
8 800 775 98 98

МУЛЬТИМЕДИЙНЫЙDVD/CD/MP3-РЕСИВЕР СО ВСТРОЕННЫМ 3.5” TFT-ДИСПЛЕЕМ И ТВ-ТЮНЕРОМMULTIMEDIA DVD/CD/MP3RECEIVER WITH BUILT-IN 3.5” TFT DISPLAY AND TV TUNERРуководство по эксплуатации Instruction manualH-CMD4028

23Table of contentsTable of contentsDear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.121212121313131313131313131414141415151515151515151616161616171717171717171717Table of contents Before you start Utilization of the product Important safeguardsInstallation/ConnectionInstallationGeneral notesDin Front/Rear-Mount1. DIN front-mount (Method A)Dismantling the unitTrim frame installation2. DIN rear-mount (Method B)Detachable control panelAnti-theft systemConnectionConnection diagramISO connection tableUsing the ISO connectorParking wire connectionReverse cable connectionOperationControl elementsFront panel Inner panelRemote controller Changing batteryGeneral operationsReset the unitTurning the unit on/offMode selectionSystem setting menuMute functionVolume controlSetting the sound characteristicsEQ modesLoudnessBMP and Double BassClock settingBeep2444555556666777889999910101011111111111111121212121212Button backlight colorImage adjustmentTFT on/offAUX in jackRadio operationsTouch screenBand selectAudio/Manual tuningProgramming tuner stationsAutomatic store/preset scanMono/select controlLocal radio station searchRDS functionAF functionTA functionPTY (Program Type)Other parameter settingTV operationsTouch screenFull-screen modeTV and audio systemSearch channelsSave channelsDisc/USB/SD/MMC operationsTouch screenInsert/Eject discMP3/DivX/JPEG file playbackPlay/pause/stopSelecting tracks/chaptersFast forward/rewindRepeat playbackRandom playbackGotoProgramming the playbackOSD functionZooming in/outSlow playbackPBC functionChanging angle

Selecting audio languageSelecting subtitle languageSelecting sound channelSelecting video systemMenu navigationID3 tag informationUSB/SD/MMC notesInserting SD/MMC card/USB deviceSystem setup System setupLanguage setupAudio setupVideo setupGeneral informationHandling compact discsCleaning discs Cleaning the unit body AccessoriesTroubleshooting guideSpecification23Table of contentsTable of contents1717181818181818181819191920202020202122

4Before you startIf you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.Utilization of the productImportant safeguards• Read carefully through the manual to familiarize yourself with this unit.• Keep this manual handy as a reference for operating procedures and precautions. Do not allow persons who have not read through this manual to use this unit.• “CLASS 1 LASER PRODUCT”This product contains a laser diode of higher class than 1. Laser beams from the optical pickup are dangerous to the eyes. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.• Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids or dust. Protect this unit from moisture.• Make sure that foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock or laser beam exposure.• The beginning of operation is the moment of the unit installation. Before use the device in winter it is recommended to heat up the passenger compartment during 20 seconds or to the operation temperature.• Using the unit with the temperature that goes beyond the operation temperature greatly decreases the operation resource of the screen and other components of the unit and can result in an outage.• Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit.• The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please ensure it before installation.• When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit.• Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the power amplifier.• Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a thunderstorm.• Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Let a qualified technician check the system.• Always keep the volume low enough so that you can hear sounds from outside the vehicle.• Should this product fail to operate properly, contact your dealer or nearest service center.

5Installation/ConnectionInstallationGeneral notes• Choose the mounting location where the unit will not interfere with the normal driving function of the driver.• Before finally installing the unit, connect the wiring and make sure that the unit works properly.• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.• Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.• If installation angle exceeds 30° from horizontal, the unit may not perform properly.• Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.Din Front/Rear-MountThis unit can be properly installed either from ‘Front’ (conventional DIN Front-mount) or ‘Rear’ (DIN Rear-mount installation, utilizing threaded screw Holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.1. DIN front-mount (Method A)1. Car dashboard2. Sleeve3. Screw4. Nut (5 mm)5. Spring washer6. Screw (5 х 25 mm)7. Metal strap8. Flat washer321182531. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation.2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place.3. Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install the strap as shown in the picture. You can bend the strap to the needed angle with your hands.4. Make the necessary wire connections. Ensure the connections are correct.5. Install the unit into the sleeve until the side locks are fixed.3546817Dismantling the unita – Trim frameb – Frame uninstall directionc – Release key insertion

6Installation/Connectionвба1. Switch off the unit and detach the front panel.2. Insert your fingers into the groove in the front side of the trim frame (apply some effort to detach the frame). Pull the frame to detach it.3. Insert the supplied release keys into the both sides of the unit body to click, as shown in the picture. To extract the unit from the dashboard, pull the release keys or the unit body to pull it out. Before detaching the unit, ensure it is not fixed with the metal strap.Trim frame installationTo install the trim frame, press it to the unit body and push it to fix it in place. This should be done before installing the front panel; otherwise you are not able to install the trim frame. When the trim frame being installed, the side with the groove should face down and fixed first.2. DIN rear-mount (Method B)For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting brackets.1. Select a position in which the screw holes of the brackets (3) are aligned with the screw holes in the unit body, and screw in two screws (2) in each side.2. Screw.3. Factory radio mounting brackets.4. Vehicle dashboard.5. Lock (remove this part). The outer trim frame and mounting sleeve are not used for method of installation.225543Detachable control panelInstall the fastening hole on the right side of the front panel into the right fastening of the unit. Then insert the left fastening on the panel into the fixing hole on the left part of the unit. Press on the upper right part of the panel until a click. Ensure that the panel is properly fixed.To detach the front panel, press OPEN button, then distract the left side of the panel from the fastening of the unit. The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks. The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc. If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control panel.Anti-theft systemThe front panel of this unit can be stored in the included protective case when not in used and carried away when you leave the vehicle to deter theft.Switch off the power of the unit. Detach the front panel, then put it to the protective case and take it with you.

7Installation/ConnectionConnectionConnection diagramRadio antenna socketVideo output (yellow)Rear view camera input (yellow)RCA line out (left=white; right=red) TV antennaReverse (pink)Parking (purple)ISO connection tableLocationFunctionConnector AConnector B1-Rear right (+) - Blue2-Rear right (-) - Blue/White3-Front right (+) - Grey4Battery +12V/YellowFront right (-) - Grey/White5Power antenna/OrangeFront left (+) - Green6Panel light/WhiteFront left (-) - Green/White7Ignition key (+12V)/RedRear left (+) - Brown8Ground/BlackRear left (-) - Brown/White Power antenna wire is intended for power supply of the antenna and for remote control of an additional amplifier.

89Installation/ConnectionOperationUsing the ISO Connector1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 122. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit.Cut the connector, connect the colored leads of the power cord to the car battery as shown in the colour code table above for speaker and power cable connections.Parking wire connectionParking brake leadBrake lightCar frameBatteryPurple WireIf Parking cable is connected to hand brake switch, the video display of the TFT monitor will be controlled by driving status. When the car is moving ahead, if the video disc is played, the screen shows warning and blank screen. The warning screen will prevent the driver from watching images.Reverse driving cable connectionCar frameCar frameRear view video camera leadReverse driving lightGearboxPink wireBatteryIf the rear view video camera is connected, the unit automatically switches to camera mode during reverse driving. The unit returns to the original work mode after the reverse driving is done.

89Installation/ConnectionOperationControl elementsFront panel1. PWR/TFT/OFF button2. BND/NP button3. TA button4. SCN button5. SELECT button/VOLUME regulator6. AF button7. MOD/MUT button8. NEXT button9. TFT display123456789101112131415161710. USB port11. OPEN button12. APS/TYPE/AUDIO button13. PTY/PLAY/PAUSE button14. CLK button15. PREVIOUS button16. AUX input17. IR-sensorInner panel123451. Disc loading slot2. SD/MMC memory card slot3. RESET button (hole)4. Panel status indicator5. EJECT buttonPressing RESET hole will erase the clock setting and stored stations.Panel status indicator lights up when you flip down the panel and flashes when you remove the panel.

10OperationRemote controller12345678910111213141516171819202122232425262728291. SETUP button2. POWER button3. ANGLE button4. ZOOM button5. STOP button6. PROG button7. STEREO button8. Cursor (UP/DOWN/LEFT/RIGHT) buttons9. REPEAT button10. AMS button11. TITLE button12. OSD button13. Number buttons14. SLOW button15. MODE button16. SUB-T button17. MEN/PBC button18. PLAY/PAUSE button19. LOCAL button20. RANDOM button21. ENTER button22. SYSTEM button23. BAND button24. MUTE button25. SEL button26. AUDIO button27. VOL+/VOL- buttons28. PREVIOUS/NEXT buttons29. GOTO buttonChanging the battery1. Press the catch and at the same time pull out the battery tray.2. Insert the 1 x lithium battery, type CR 2025 3V with (+) mark facing up. Insert the battery tray into the remote control.

11OperationSystem setting menuTo adjust parameters of the system you can use the touchable menu consisting of 2 pages: SETUP and SOUND. SETTINGS page is available if you touch SETUP icon in Main menu, or if you touch SETUP icon in Radio, TV or Aux mode. SOUND page is available if you touch SOUND icon in Radio, TV or Aux mode. Each page contains touch icons enabling you to perform the operations described below.Mute functionPress MUTE button on the RC or press and hold MOD/MUT button on the panel to turn off the sound. Or touch MUTE icon available in SOUND page or in Radio interface. “MUTE ON” appears on the display. Press the button again or adjust volume to resume the sound output. Volume controlPress VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to decrease or increase sound volume level. Or touch + and – icons referring to VOL item in SOUND page.Setting the sound characteristicsPress repeatedly SELECT button on the panel or SEL button on the RC to select the audio setting: VOL (volume) => BAS (bass) => TRE (treble) => BAL (balance) => FAD (fader). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to adjust the General operationsReset the unitOperating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET button (hole) with a pointed object, such as a ballpoint pen, to set the unit to initial state. When some errors occur, you can also press RESET button to resume to normal, and it will erase some memorized functions.Turning the unit on/offPress any button on the panel or the RC (except OPEN button) to turn on the unit. Press and hold POWER/TFT OFF button on the panel or press POWER button on the RC to turn off the unit.Mode selectionRepeatedly press MOD/MUT button on the panel or MODE button on the RC to select a mode: Radio => DVD => USB => SD => TV => AUX. Or in the Main menu touch the icon of the needed mode. The Main menu is available on the touch screen after you touch the arrow icon in the top right corner of the screen while in any mode. The DVD, SD and USB modes are only available when corresponding storages are connected to the unit. Bluetooth mode is unavailable for this model.

1213OperationOperationselected item. Balance is to adjust the balance between the left and right speakers. Fader is to adjust the balance between the rear and front speakers. Or touch + and – icons referring to corresponding parameter in SOUND page. After you have reached your desired effect, leave the unit idle in order for the new setting to take effect. If the equalizer is set on, bass and treble are not adjustable.EQ modesPress repeatedly SELECT button on the panel or SEL button on the RC until the display shows EQ OFF. Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to choose an equalizer effect: POP => ROCK => CLASS => FLAT => EQ OFF. Or touch repeatedly EQ icon available in SOUND page. After you have reached your desired effect, leave the unit idle in order for the new setting to take effect.LoudnessPress repeatedly SELECT button on the panel or SEL button on the RC until the display shows LOUD ON (LOUD OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between LOUD ON/LOUD OFF. Or touch LOUD icon available in SOUND page. LOUD function is to emphasize the bass output; the word LOUD ON indicates that the LOUD mode is on.Best Music Position and Double BassIn SOUND page touch MBP icon to select left (L) or Right (R) channel for best music position. Touch DBAS icon to switch on or off double bass function.Clock settingPress CLK button on the panel to show the time on the display. Press and hold it, the hour will be in yellow. Rotate VOLUME regulator on the panel or press VOL+/VOL- buttons on the RC to adjust the hour. Press SEL button on the RC or SELECT button on the panel, the minute will be in yellow. Rotate VOLUME regulator on the panel or press VOL+/VOL- buttons on the RC to adjust minutes. Press CLK button to confirm.Or touch + and – icons referring to HOUR and MIN item in SETUP page to set hours and minutes correspondingly.BeepPress repeatedly SEL button on the RC until the display shows BEEP ON (BEEP OFF). Press VOL+/VOL- buttons on the RC to select between BEEP ON (beep sound will be heard when buttons are pressed) and BEEP OFF. Or touch BEEP icon in SOUND page to switch beep on of off. After you have reached your desired effect, leave the unit idle in order for the new setting to take effect.Button backlight colorPress repeatedly SELECT button on the panel or SEL button on the RC until the display shows COLOR1 (COLOR2). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between COLOR1 (green button backlight) and COLOR2 (red button backlight). After you have reached your desired effect, leave the unit idle in order for the new setting to take effect.Image adjustmentIn SETUP page touch + and – icons referring to Brightness, Contrast, Color and Hue item to adjust corresponding parameter of the image.TFT on/offPress POWER/TFT OFF button on the panel to switch the TFT display off. Press the button again to switch the display on.AUX in jackAUX-in jack is intended for connecting external audio equipment to amplify the sound. If connection is made correctly, the audio signal from the external source will be translated through the acoustics of the head

1213OperationOperationunit. This enables to adjust the volume and quality of the sounding. For example, you can connect an MP3-player to listen to tracks using the car acoustic system.Radio operationsTouch screenIn Radio mode touchable interface is available enabling you to perform various operations. The touch menu consists of two pages. Touch icon in the right bottom part of the screen to switch between two pages.Band selectPress repeatedly BND/NP button on the panel or BAND button on the RC or touch repeatedly BND icon on the screen to select your desired radio band in Radio mode: FM1, FM2, FM3, AM1 (MW1), AM2 (MW2). In each set of the bands you can store up to 6 preset stations, making total 30 preset memory stations.Auto/Manual tuning• Manual tuning: Press PREVIOUS/NEXT buttons on the panel or on the RC or touch repeatedly and icons on the screen to manually adjust the radio frequency.• Auto tuning: Press and hold PREVIOUS/NEXT buttons on the panel or on the RC or touch and icon on the screen, the radio will seek to the next up or down strong and clear frequency station automatically. Repeat this action to seek for other desired stations. To stop automatic search, press NEXT or PREVIOUS button on the panel or on the RC or touch and icon on the screen.Programming tuner stationsThere are six numbered preset buttons on the RC (1~6) and six number icons (P1~P6) in the bottom of the screen, under which you can store and recall stations for each band. Select the needed frequency, then press and hold a preset button. The station will be saved in the memory under the corresponding number. To recall a stored station, press the corresponding preset button.Automatic store/preset scan• Automatic store: Press and hold AUDIO/TYPE/APS button on the panel or AMS button on the RC, or touch and hold AMS icon on the screen. SCAN will be displayed. The radio will automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press this button again.• Preset scan: Press AUDIO/TYPE/APS button on the panel or AMS button on the RC, or touch AMS icon on the screen. INTRO will be flashing. The receiver will scan the saved stations in all bands for 5 seconds.Mono/Stereo control (in FM radio mode)Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows ST ON (ST OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between ST ON/OFF. ST ON means stereo reception of the signal; ST OFF means mono reception mode. Or press STEREO button on the RC or touch MO/ST icon on the screen to switch stereo reception on/off. Improvement of reception of distant stations can be done by selecting mono mode, which may cut down some reception noise.Local radio station searchPress repeatedly SELECT button on the panel or SEL button on the RC until the display shows LOC ON (LOC OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between LOC ON/OFF. LOC ON means that only local stations are received; LOC OFF means that both local and distant stations with weak and strong signal are received. Or press LOCAL button on the RC or touch LOC/DX icon on the screen to switch between local and distant station reception.RDS functionRDS (Radio Data System) service availability

14Operationvaries with areas. Please understand if RDS service is not available in you area, the following service is not available, either.AF (Alternative Frequencies) functionPress AF button on the panel or touch AF icon on the screen to turn the AF function on or off. When the function is on, AF symbol will blink on the display.When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search another station with the same PI (Program Identification) as the current station but with a stronger signal, so that you do not have to retune the stations when driving between different transmitter coverage areas.PS (Program Service name): the name of station will be display instead of frequency.If RDS service is not available in your area, turn off the AF mode.TA (Traffic Alarm) functionPress TA button on the panel or touch TA icon on the screen to turn TA function on or off. When on, the TA symbol will show on the display.In TA mode traffic program will be automatically searched, until the program is received. When traffic announcement is received the unit will temporarily switch to the tuner mode (regardless of the current mode) and begin broadcasting the announcement. After the traffic announcement is over, it will return to the previous mode and volume level. To interrupt traffic announcement press TA button shortly; it will not switch off the TA mode.PTY (Program Type)This radio will allow you to select the type of program required, and will search for a station broadcasting that type of program.Press PTY/PLAY/PAUSE button on the panel or touch PTY icon on the screen to show the music type. Then press 1 - 6 number buttons to choose different music programs available.Press twice PTY/PLAY/PAUSE button on the panel or touch PTY icon on the screen to show the speech type program. Then press 1 - 6 number buttons to choose different speech programs. Each number button will show 2 or 3 different speech programs for you to choose: Pop, Rock, Easy, Light, Classics, Other, Jazz, Country, Nation, Oldies, Folk, News, Affairs, Info, Sport, Educate, Drama, Culture, Science, Varied, Weather, Finance, Children, Social, Religion, Phone IN, Travel, Leisure, Document).When PTY is selected, the radio starts to search corresponding PTY information, and stops if the PTY information is detected. If no buttons are pressed within several seconds, previously selected PTY is searched. During 1 loop, if desired PTY is not found, the unit will return to previous mode. Press PTY/PLAY/PAUSE button on the panel or touch PTY icon on the screen for the 3rd time to switch the PTY function off.Other parameter settingTo choose the corresponding parameter, press and hold SELECT button on the panel or SEL button on the RC, then press it repeatedly until the display shows the needed parameter. Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to choose the needed option. After choosing, please leave the unit idle to activate.• TA ALARM/TA SEEK: In TA SEEK mode, the unit will seek for traffic announcement program; in TA ALARM mode, the alarm is set off. Or you can touch TASET icon on the screen to switch between TA ALARM/TA SEEK.• PI SOUND/MUTE: Choose either PI sound or PI mute. PI sound refers to the reception noise when the AF function tries to scan alternative frequency.• RETUNE S/L: RETUNE refers to the time period the unit allows for radio scan when reception is interrupted. SHORT represents a time period of 30 seconds and LONG represents a time period of 90 seconds. Or you can touch RETUNE icon on the screen to switch between RETUNE S/RETUNE L.• MASK DPI/ALL: During MASK DPI mode,

15Operationthe unit will mask only the AF which has different PI, this is the default mode; during MASK ALL mode, the unit will mask the AF which has different PI and no RDS signal with high field strength. Or you can touch MASK icon on the screen to switch between MASK DPI/ALL.TV operationsTouch screenIn TV mode touchable interface is available enabling you to perform various operations.Full-screen modeWhen the TV image is in full-screen format, touch the screen to go to TV touchable interface. When in the interface, touch ENTER button on the screen to go to full-screen mode.TV and audio systemTouch SYS button on the screen to select one of the available TV systems. Touch AUDI button on the screen to select one of the available sound systems.Search channelsTouch SCAN button on the screen or press APS/L/R button on the panel or AMS button on the RC to automatically search and save all available TV-channels. Touch and icon on the screen to search nearest available station downwards or upwards.Save channels• When a channel is found, touch and hold a channel cell on the screen or press and hold a number button on the RC. The current channel will be saved on the corresponding number position. To call a saved station, touch a channel cell on the screen or press a number button on the RC.• Press PREVIOUS/NEXT buttons on the RC or panel or touch and icons on the screen to go to previous or next saved channel.Disc/USB/SD/MMC operationsTouch screenIn Disc/USB/Card mode touchable interface is available enabling you to perform various operations. The touchable menu is available if during playback you touch the screen in the bottom. The menu is displayed in the bottom part of the screen and consists of three pages. For details please see the table below:IconOperationPlay/pauseStopRewindFast forwardPreviousNextBack to main menuTo next pageAudioOSDUP cursorDOWN cursorLEFT cursorRIGHT cursorOK (confirmation)To next pageMenu

16OperationAngleRepeatTitleSubtitleNUMNUM (number pad)+ZoomTo next page The operations are detailed below.Insert/Eject disc• Open the front panel and insert a disc into the disc slot with label side up. The disc will be automatically loaded into the unit. The first file in the root folder will be played. Close the front panel.• Open the front panel and press EJECT button to eject the disc from the slot. If the disc is not removed from the slot within several seconds, it will be automatically loaded into the slot again. When the disc is ejected and removed, the unit will automatically switch to another mode.MP3/DivX/JPEG file playbackWhen you insert a storage containing MP3/DivX/JPEG files, the screen will show following interface:1234561. Folder list2. Audio file icon3. Current file info4. Photo file icon5. Video file icon6. File listYou can select the needed folder or file by pressing cursor buttons. Press ENTER button on the RC or touch OK icon on the screen to confirm your selection.If you are using a multi-format storage, press cursor buttons to select between music, photo and video files (the corresponding icon will be framed), then press ENTER button on the RC or touch OK icon on the screen to confirm your selection. Or directly touch Audio, Photo or Video file icon to go to playback of corresponding files. Manufacturer guarantees regular playback of licensed discs only. Some AVI files cannot be played due to their parameters and recording conditions. Video files more than 2 Gb having AVI extension can be played partially.Play/Pause/StopDuring playback press PLAY/PAUSE button on the RC or touch Play/pause icon to pause playback. Do this operation again to resume playback. To stop playback, press STOP button on the RC or touch Stop icon.Selecting tracks/chaptersDuring playback press PREVIOUS button on the panel or on the RC or touch Previous icon to play the previous track/chapter (depending on the format). Press NEXT button on the panel or on the RC or touch Next icon to play the next track/chapter. Press number buttons (0-9) on the RC or touch NUM icon, then touch number icons to select the desired track/chapter.Fast forward/rewindPress and hold repeatedly PREVIOUS or NEXT button on the panel or on the RC or touch Rewind or Fast forward icon for fast backward or forward playing correspondingly. With each pressing the playback speed will

17Operationincrease as follows: x2 => x4 => x8 => x20 => Normal. While fast playback, press PLAY/PAUSE button on the RC or touch Play/pause icon to resume normal speed.Repeat playbackPress REPEAT button on the RC repeatedly or touch Repeat icon for repeat playing in different modes: track/chapter repeat, folder repeat, disc repeat, repeat cancel (depending on the format used).Random playbackPress RANDOM button on the RC to activate random playing mode. Press one more time to return to normal playing.GOTOPress GOTO button to show the playback parameters for the current chapter/track/time (track/title/chapter number or time). Press cursor buttons to navigate between the parameters and use number buttons to input needed settings. Press ENTER button on the RC to start playback from the set number or time.Programming the playback• Press PROG button on the RC to open program menu.• Use cursor buttons to select the program position and use number buttons to input the desired track/title/chapter (depending on the disc type).• Press PLAY/PAUSE button to start program play, or move the cursor to select PLAYING and press ENTER button on the RC to play.• Move the cursor to CLEAR, press ENTER button on the RC to delete the programmed list. Press PROG button to quit programming.OSD (On Screen Display) functionPress OSD button on the RC or touch OSD icon repeatedly to show current playback information, such as number of track/chapter/title, current track/chapter/title time elapsed/remaining, total track/chapter/title time remaining (depending on the disc type).Zooming in/outDuring playback of video or images, press repeatedly ZOOM button on the RC or touch Zoom icon, the picture will be zoomed in the sequence: X2 =>X3 =>X4 =>X1/2 => X1/3 => X1/4 => Normal. When the image is zoomed in, you can move it by pressing cursor buttons.Slow playbackDuring playback press repeatedly SLOW button on the RC to select the speed of slow playback: 1/2 => 1/3 => 1/4 => 1/5 => 1/6 => 1/7 => Normal. While slow playback, press PLAY/PAUSE button on the RC or touch Play/Pause icon to resume normal playback.PBC (Playback Control) function (for VCD only)This function is only available for the VCD with PBC function. Press and hold MEN/PBC button on the RC to set PBC on/off; when PBC is off, the screen will show PBC menu if you switch PBC on. If the menu consists of a list of titles, you can select a desired one using number buttons on the RC.Changing angle (for DVD only)Press ANGLE button on the RC or touch Angle icon to playback images at different camera angles. If a disc doesn’t support multi-angle playback, this function will not work.Selecting audio language (for DVD only)During DVD disc playback, press AUDIO button on the RC repeatedly or touch Audio icon to select the audio language to listen. This function will not work if a disc does not support multi-language audio.Selecting subtitle language (for DVD only)If your DVD disc supports multi-language

18Operationsubtitle, press SUB-T button on the RC repeatedly or touch Subtitle icon to switch among disc-supported languages.Selecting sound channelDuring VCD/CD disc playback repeatedly press AUDIO button on the RC or touch Audio icon to select the channel: Mono left => Mono right => Stereo.Selecting video systemWhile video playback, press repeatedly SYSTEM button on the RC or BND/NP button on the panel to select the video system (NTSC/PAL/PAL60/AUTO).Menu navigation• Press MEN/PBC button on the RC or touch Menu icon to activate the disc menu list on the screen. Choose the desired item with cursor buttons. Press ENTER button on the RC or touch OK icon to confirm the selected item and start playing.• When playing a DVD, press TITLE button on the RC or touch Title icon to go to the title list of the disc. Title and menu are only available if the disc has these functions.ID3 Tag functionIf an MP3 file has ID3-tag information in the supported format, such information will be displayed while playbackUSB/SD/MMC notes• USB format supports 2.0. Capacity: up to 32 Gb.• For correct and satisfactory operation, licensed SD/MMC memory cards of famous brands should be used with this unit. Avoid using memory cards of unknown brands. Capacity: up to 32 Gb.Inserting SD/MMC card/USB deviceInsert an MMC/SD card or a USB device into MMC/SD slot or USB slot. Then the playing mode will be changed into Card or USB mode automatically. The first card/USB device track playback will start. If the unit is afterwards switched to another mode, press MOD/MUT button on the panel or MODE button on the RC to select USB or memory card mode. Or touch corresponding icon in the Main menu.All the operations with files stored in a memory card or USB are the same as described in Disc Operations for file discs.System setupPress SETUP button on the RC to display setup screen, use LEFT/RIGHT cursor buttons and ENTER button to select the desired setup page: System, Language, Audio, Video. In the selected page select an option using UP/DOWN cursor buttons, then press RIGHT cursor button to go to setting list. Use UP/DOWN cursor buttons to select the needed setting. Press ENTER button on the RC to confirm.System setupSYSTEM SETUPTV SYSTEMSCREEN SAVERTV TYPEPASSWORDRATINGDEFAULTTV systemSelect the TV system in the setting menu (NTSC, PAL, AUTO).Screen saverThe screen saver appears if disc stops for more than 3 minutes.TV typeSelect TV type to watch wide screen movies.4:3 PS: For 4:3 TV, left and right edges will

19Operationbe cut.4:3 LB: For 4:3 TV, black bars will appear on top and bottom.16:9: For 16:9 wide screen TV.PasswordChange the password. The initial factory password is 0000. You can set your own password. If you forget your own password, you can use 0000 as general password.RatingThe control level is for parental to control playing content and protect your children from violence and erotic. The disc, the level of which is higher than the setting level can not be played. The rating can be selected only under the password unlocked status, and the limits can be worked only under the password locked status.DefaultReset all settings to default values.Language setupLANGUAGE SETUPOSD LANGUAGEAUDIO LANGUAGESUBTITLE LANGUAGEMENU LANGUAGEOSD languageSelect the language to be used for the on-screen display.Audio languageSelect the language to be used for the audio. You can select a preferred audio from those included on the DVD video disk.Subtitle languageSelect the language to be used for the Subtitles. You can select a preferred subtitle from those included in the DVD Video disk.Menu languageSelect the language to be used for the Menu. You can select a preferred audio from those included on the DVD.Audio setupAUDIO SETUPAUDIO OUTKEYAudio outSPDIF OFF: Analog or optical output has no output signal.SPDIF/RAW: When the unit is connected to a power amplifier by the analog or optical port, please select this item; the power amplifier you connected must have the decode function of Dolby Digital, DTS or MPEG.SPDIF/PCM: When the player is connected to a 2-channel digital stereo amplifier, please select this item.KeySelect key UP/DOWN according to your preference.Video setupVIDEO SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSSet a parameter with UP/DOWN cursor buttons: Brightness, Contrast, Hue, Saturation, Sharpness.